Insulate cab for noise???

samedi 14 mai 2022

Has anyone installed the sound deadening rubberized matting under the seat to try to kill the engine noise? I purchased several boxes of the mat but there are several access points under the seat that probably should not be covered.
Any recommendations as my wife says its too loud for her to ride in.
RTVC 1100 Diesel with full cab.


Insulate cab for noise???

Cylinder full of oil

Hello, I’m new here. This is the first forum I have ever joined even though I have browsed through threads over the years to find information. I am at a loss and hope someone can help me figure this out. I bought a 2014 Kubota rtv x900 two months ago and after getting it home found two problems. 1 won't go over 6-7 mph (Which I think Ill let the Kubota dealer fix.) 2 It is getting hot after about 20 minutes. After flushing radiator, eliminating air bubbles, new thermostat, rad cap etc I...

Read more


Cylinder full of oil

628PM

jeudi 12 mai 2022

You still on here 628PM? Just wondering how the Gator is doing?


628PM

5030 4-wd transmission issue

My 5030 Ford/ New Holland 4-wd tractor will not shift into gear while running. It's constantly trying to pull. Any help would be greatly appreciated


5030 4-wd transmission issue

Road Dust Infiltrating Cab 2020 X1100C Kubota

mercredi 11 mai 2022

Has anyone found a small commercial weather-stripping with an adhesive backing to supplement the Kubota factory door seals? We're dry and dusty so the dust is seeping through the openings around the door seals. I'm hoping to add to what Kubota put in place to stop it. The interior of my cab doors, dash, seat, and everything enclosed is coated in dust from the leakage. The unit is stored under cover so the sun is not a factor. Your suggestions are appreciated.


Road Dust Infiltrating Cab 2020 X1100C Kubota

RTV-X1100C Floor Mat Recall

lundi 9 mai 2022

So last fall got the recall notice but told dealer I was holding off until spring So they called and were going to come to my house tomorrow, but when he told me what the "fix" is, I said don't bother.

Apparently the problem is, some people have had the mat curl up and get caught in the fuel pedal.

The "fix".......trim the mat around the pedal. No thanks. As you can see, there is no way my mat can become a problem, and I certainly don't want a big hole cut around my pedals. The first pic...

Read more


RTV-X1100C Floor Mat Recall

rtv1140 slow up hills, no load on engine

dimanche 8 mai 2022

Hey All, Tons of excellent info here! I've read and read and checked and checked everything I can externally on our RTV and I'm stumped. I'm very familiar with working on hydraulics, mostly dozers and skit steers, but have never worked on a Kubota of an kind.

Its a 2010 1140cpx with 3950 hours
It runs excellent, shifts excellent, neutral is good
Slow speed maneuvering seems reasonable, the pedal is responsive and progressive off idle until about 1/2 throw
On flat ground in any gear from a...

Read more


rtv1140 slow up hills, no load on engine