Ax handle 101

lundi 28 juin 2021

Does a ax handle have to be made a certain way, if so why......
Todays modern hippies trying to make a living off the land, it takes know how and hard work with what you have to work with.......


Ax handle 101

Beach at Keramoti of Kavala Greece at full moon

dimanche 27 juin 2021

Good evening to all! This is my close beach from my home,6 km only, i grow up here!
A short video from the beach of Keramoti in Kavala - Greece the day before yesterday with the full moon, Straberry moon some says.
The video was made with a unique lighting of the moon.
Was done to test shots in the 'absolute darkness'.
Difficult case, since I do not have a faster lens, I have the Tamron 28 75 f2.8.
The relevant compression was done by ytube, which also did some 'damage'.
Here is the video...

Read more


Beach at Keramoti of Kavala Greece at full moon

L5240 hydraulics pulsing

samedi 26 juin 2021

Unless the 3pt hitch is all the way down, the hydraulics pulse on my tractor.

Any ideas as to the cause?


L5240 hydraulics pulsing

Cruise control

vendredi 25 juin 2021

As some of you know we do agricultural spraying with our X1100c. In March I started looking for a manufacturer that makes a cruise control for the Kubotas. After a lot of research I came across a company called McCruise in Australia. Due to the pandemic they have had issues getting parts but finally they arrived and they shipped out a unit. Priced at 1775.00 aud or about $1400.00 Usd it’s a pretty good investment. I’m telling you about this because it arrived today.
Im in southern Oregon...

Read more


Cruise control

TS 110 E59 code

So, I am currently working for a local farmer, TS 110 16x16 trans. 5600 hours. tractor stops... E59 CODE and beeps.. how do you fix that?

thanks

JOHN from WI


TS 110 E59 code

Cub cadet Yanmar sc2400

when I use my brush hog it tall grass the four wheel drive shaft gets wound with grass. It doesn’t matter if it’s in four wheel drive or not. What is causing this?


Cub cadet Yanmar sc2400

UTV or ATV shopping

jeudi 24 juin 2021

Nice to have cab with heat and AC but at 28k I'll pass, no way I can afford that for what it is, cant drive on a road and cant really do tractor work either. What is Polaris thinking or do most people have so much $$$ that they just need something to spend it on.....


UTV or ATV shopping

L48 Hst No Reverse

mardi 22 juin 2021

Help!! lost reverse...

04 Kubota L48 Hydro

Lost Reverse .. no noise no nothing ... just no go ... forward only.
all linkage in tact and moving both forward and back.
netural detent seems to center ok. Fluid is fine. filter maybe 80 hours.

Useing for land clearing and noted a piece of debree caught underneth unit yesterday, but cleared on its own with no noticeable issues as it happened. Used for 4 hours to finish the day. Started this morning... all working well. Then no reverse. No...

Read more


L48 Hst No Reverse

Removing 7308FEL from a NH 1920

Can anyone send a video on how to remove this loader. Bought the tractor and I do not have manuals for either.


Removing 7308FEL from a NH 1920

call girl in jaipur

We understand that reliability really matters the foremost to our customers. specially VIP client a authentic agency before booking the escort service in Jaipur escorts and this is the argument we are making and taking every necessary step to ensure this. so that our customers feel safe while spending their time with our call girls in Jaipur. we try to provide them whatever they want . Our escort girl are fully verified and keep...

Read more


call girl in jaipur

simple wiring for bx 2200

lundi 21 juin 2021

hoping some one can provide a simple wiring diagram so tractor will start and shut down and have oil pressure , water temp and voltage gauge. don't need anything else.. no safety switches lights etc.


simple wiring for bx 2200

Emergency Brake Stuck

dimanche 20 juin 2021

2013 ( I think) Kubota 1100 RTV and the emergency brake cable has either broken or come apart somewhere. And the RTV is stuck with the emergency brake ON. Anyone had this problem before? And how can I get the EB disconnected so I can move the RTV?


Emergency Brake Stuck

Cheesy Hash Brown Casserole

samedi 19 juin 2021

We had a pot luck at work and someone brought this. I think it's worth sharing. Very good.

Cheesy Hash Brown Casserole

1 20 Oz package shredded hash brown potatoes
1 small can of cream of chicken soup
2 cups of shredded Cheddar Cheese
1 container of sour cream
1 stick of butter (melted)

Combine ingredients and dump into 9 x 13 pan.
Bake at 350 for 1 hour.


Cheesy Hash Brown Casserole

Massey Ferguson 7's

vendredi 18 juin 2021

Got a couple of Massey Ferguson 7's. The one with the chrome hubcaps runs perfect, just needs a seat. Has a mower deck but it's rotten.

The other one has a locked up engine, but has a perfect mower deck.

I couldn't stand to see them get scrapped.


Massey Ferguson 7's

RTV900 loses power and has a whine from the pump

Hi all. Just curious if anyone has any ideas for me.

I've got an RTV900 that runs just perfect for about 10 minutes.

Then it will begin losing hydro power (nothing wrong with the engine). High/Medium/Low all just starts losing power and you begin to hear a whine from the pumps. Before long, you are in low, full throttle, and going nowhere. I shut it off for a few minutes, start it right back up and it runs great again.

I've replaced the brass pump plates this year as I thought they...

Read more


RTV900 loses power and has a whine from the pump

Military Drones Market Manufacturers, Research Methodology, Competitive Landscape and Business Opportunities by 2028

5.jpg

The global military drones market size is expected to reach USD 35.71 Billion at a steady CAGR of 10.9% in 2028, according to latest analysis by Emergen Research. The market evaluations over the forecast years are based on a comprehensive analysis of the leading market segments, such as product type outlook, application continuum, regional overview, and competitive...

Read more


Military Drones Market Manufacturers, Research Methodology, Competitive Landscape and Business Opportunities by 2028

2005 RTV 900 Front springs

jeudi 17 juin 2021

Does anyone happen to have the factory height of them? I think mine are worn out but wanted to check the height before spending the money on a new set.


2005 RTV 900 Front springs

Opinions NH TC35DA with 16LA loader and woods frame mounted backhoe

mercredi 16 juin 2021

Hello All,

I am looking at a used NH TC35da, loader, and backhoe...1840 hrs asking price 22K, normally this would seem expensive but it seems like the market is crazy now. Thoughts on this setup? Price? Problems? Thanks. Also, thoughts on a weld on thumb for the backhoe?


Opinions NH TC35DA with 16LA loader and woods frame mounted backhoe

no hydro pressure

mardi 15 juin 2021

Hi. First time post and needing help. I have a 2016 RTV500 with 125 hours. While driving the other day, with no load on level ground it made a small metallic noise much like clipping a small tree with the snowplow blade. Then it just coated to a stop. No reverse, no forward. I have checked and the transmission shifts and feels like it is working correctly when I disconnected the shift linkage and moved the shift lever from neutral to forward, and reverse. Wheels of the ground they...

Read more


no hydro pressure

Battery light stays on.

lundi 14 juin 2021

I am sure this has been covered somewhere in the forum....
The battery light on my 2005 900 RTV continuously stays on. After riding it a while if you turn it off it will not restart. The lights will work but the engine will not turn over. Assuming the alternator is not charging the battery. I've checked/cleaned fuses, wires, terminals, etc... and everything appears to be fine.
After charging the battery, everything is back to normal.
Any other ideas about what might be wrong, before I...

Read more


Battery light stays on.

Massey 1740M Steering Problem

I just bought a new Massey 1740M and it will not steer when sitting still and gets worse when you have weight in the bucket. It’s been at the dealers Since I got it. They changed the steering pump and it still the same. I’m unable to get in and out of tight places. The dealer said it is operating within specs and noting they can do about it. I’ve owned Massey before and never had an issue. Anyone else having this issue and what is the fix? I’ve attached a video. Thanks. Rod


Massey 1740M Steering Problem

....and the truth shall make you free.

dimanche 13 juin 2021

Just in case there are souls like me that dont like church gatherings and have crowd phobia but still like to here real bible teaching and believe that God wrote a book and has preserved his book, here is some good Geneses teachings from pastor Gene Kim. He now wares two mics to prevent audio glitches.

I'm so glad that God offers everlasting life for free without good works through Jesus Christ because I would fail big time............
...

Read more


....and the truth shall make you free.

TYM 723 hydraulics heat up using remote float

samedi 12 juin 2021

I am using the float position on my remote when using a drum mower. The hydraulics heat up to the point that engaging gears is delayed. I have 700 hours on the tractor. My understanding of the valve is that the fluid should flow through the body the same as when in the neutral position so the fluid shouldn't heat up more that normal. The workshop manual shows the flow through the different positions. Is there an adjustment for the float? The manual doesn't show one.

Has anyone added a...

Read more


TYM 723 hydraulics heat up using remote float

Stock wheels to aluminum.

mercredi 9 juin 2021

What is needed to make the change from steel wheels to aluminum. The new ones have tapered homes. Which bolts?


Stock wheels to aluminum.

Transmission problems

Ok so I'm on a budget, had to buy a broke 2013 rtv900xt. Runs good wouldn't move,I removed engine and transmission when I separated transmission from unit the bearing holder plate was broke at input shaft. Ring and pinion was trash (845.00) later and 1500.00 total in parts . When I reassemble transmission gears will only move when you shift in low gear. I need a lil help. I have service manual and I'm also a Cummings and Detroit mechanic. So I know my way around a wrench. But this thing is...

Read more


Transmission problems

x1100c hydraulic whine

New to me x1100c has quite a bit of hydraulic noise that seems to be coming from the charge pump/hst filter when it's at idle. Runs perfectly normal except for the whine. Is this normal? My other machine doesn't do it near this much.


x1100c hydraulic whine

RTV x1100c popped out of gear going downhill. Out of control

mardi 8 juin 2021

I had a big ole tree fall and block my trail. So I'm backing away and have to back up a steep hill to change direction. I had to go a ways up the hill and had trouble backing up the hill, even after going into 4wd, but eventually I got up to where I could hit the Y part of the other trail. I switch from reverse to forward and go.
I'm in gear and the hydraulics are holding me back from going to fast. Then all the sudden I hear a pop and the RTV picks up speed FAST. A drop off to the...

Read more


RTV x1100c popped out of gear going downhill. Out of control

ROPS and avoiding your garage roof

Here's my solution to prevent leaving my ROPS up when parking my Kubota in a standard sized garage. I had a 12" x 24" banner made at the local print shop. It has a grommet at the two top corners. I used self tapping screws to mount it to the garage door, about 2 feet above the floor. It hangs flat against the garage door when closed, but when open, the banner hangs down so it's in my face when pulling into the garage. My ROPS is about 2 inches too high to clear my garage door. Cost was...

Read more


ROPS and avoiding your garage roof

Loaded Cylinder Head for rtv1100

lundi 7 juin 2021

I'm trying to get a cylinder head complete with valves from my kubota dealer to replace my cracked on in my rtv1100 with the d1105 engine.

Dealer tells me he can only get a cylinder head without valves.

Does anyone have a part number or source for a loaded cylinder head?


Loaded Cylinder Head for rtv1100

RTV X1100C spray applicator questions

i am thinking of adding a slide in spray set up of smaller acreages. was looking at this https://www.enduraplas.com/products/field-boss-365/ and adding a boom. what are you all using?


RTV X1100C spray applicator questions

Working the RTV

dimanche 6 juin 2021

Did some work on my bush road today. I LOVE this RTV!! I didn't want to abuse it so I only hauled a bucket and a half from the B2620 at a time. It handled it like nothing.
Oddly it goes one MPH faster up the hills when it's loaded than it does empty. And had the AC on high. It bogged down at first, then just starts pulling.
As others here told me, it does save a ton of time as it can travel a lot faster up the hills than the tractor can.

So glad I bought this rather than another "toy" atv.


Working the RTV

John Deere 6110 hissing sound stuck valve.

samedi 5 juin 2021

Title says it all.
I have a 6110 jd with a 620 loader. It doesn’t seem to matter if I use the loader, or steering wheel, quite often a valve is sticking somewhere in the back making a hissing sound. If I wiggle the loader it releases the pressure.
Any idea what to take apart and clean?
Thanks


John Deere 6110 hissing sound stuck valve.

Adjusting Valves RTV900

My 2010 RTV900 that I purchased last winter has 3200+ hours on it and I don't think the valves had ever been adjusted based on the paint on the bolts and the vapor hose going to the valve cover. To adjust the valves it is necessary to have the crank at exactly top dead center (TDC or 1TC). The opening to view the marking on the flywheel is low on the right side near the gear case and the easiest place to get a wrench on the bolt holding the crank pulley on in the front of the engine is by...

Read more


Adjusting Valves RTV900

RTV X1100C Questions Re Hand Throttle and Towing

I have ordered a RTV X1100C and am plagued by these questions. Does it come standard with some kind of manual throttle control to left of driver seat? And, how is it rated to tow just 1300 lbs when I have seen videos of owners towing way more than that?


RTV X1100C Questions Re Hand Throttle and Towing

dead battery now will not start

vendredi 4 juin 2021

RTV 900 2013. Replaced dead battery now nothing works horn, lights gauges, appears completely dead, except my work lights that are connected directly to the battery now work fine. i checked the 2 big fuses and they look ok. Any suggestions? Checked battery terminals and they are about 12.2 volts. Charged the new battery and it is 100%.


dead battery now will not start

Rattles?

jeudi 3 juin 2021

I have to go outside later and crawl under the RTV and check fasteners. Anyone have problems with rattles on the 1100's? Mine just started after 4 rides. Sounds like skid plates vibrating? I did have to bend up one of the exhaust shields previously.
It's like a vibration resonance.

It only does it at idle standing still in gear, but it is enough to annoy me, LOL


Rattles?

Pictures of tractors

Do you have any pictures of your tractors? Any pictures, still or action shots appreciated. Show off your baby. :D


Pictures of tractors

width of xg 850 bed

Is the outside width at the front of the sidekick bed the same as a x900 ? My x900 outside width at the front is right at 60 inches. I am thinking of ordering the sidekick front upper bed plate to put on my x900 to close the gap between the bed and cab. Looks like it would fit with drilling two bolt holes at each corner of the x900. Thanks!


width of xg 850 bed

Excavator seat time

Drove the excavator over the back 40 to the river this morning. 3/4 mile of seat puckering fun. I had the excavator rocking like a rocking chair more than once. Made me appreciate the skill of the operator who has done major trail improvements and fixed a huge slip on my property. He always made it look so easy an natural.


Excavator seat time

30hp vs 80hp

mardi 1 juin 2021

My wife's brother stopped by yesterday with an 80hp Kubota he picked up a couple years ago. BIG tractor. Has a Woods FEL on it and a big box blade on the back.
He thinks it's a 2002 model but not sure. He's considering selling for 14k. Has me thinking, do I need a bigger tractor. Obvious answer seems to be yes but I also have to think about my trails and some of the current tight spots this tractor would not fit through without some trail mods.

My 30hp does the job, most of the...

Read more


30hp vs 80hp