1100c Strobe installation

jeudi 30 septembre 2021

MY 2020 just purchased and should have had the dealer install the rear work light and the strobe but I didn’t. Is it as simple as removing the plate on the roof And plugging the light in? Same on the dash is the plug right there if you remove the switch cover? I’m truly inept so if it’s not it’ll have to back to the dealer.

TIA

Gregg


1100c Strobe installation

Problem w/2020 X1100C

My X1100C with 100 hours on it has a problem: when I turn the air-conditioner on, within just a few minutes the front fan begins to turn on and off, cycling every few seconds. The AC cools great; low and high pressures are good. The receiver dryer sight glass shows coolant level is okay. I have replaced the coolant sensor that screws into the thermostat housing and the relay under seat that controls the front fan.
The front fan continues...

Read more


Problem w/2020 X1100C

Hissing sound when driving around

Hi,

I have a almost brand new 1100XC with less than 50 hours on it. When I start it and drive around when it's "cold", it doesn't make any hissing sound. After a few minutes a few minutes of running, it starts doing this extremely annoying hissing sound.

I took a video a few minutes ago:

When I stop moving, it stops. Sometimes it doesn't do it, like when going downhill, but when I go uphill or on flat grounds, it's just insane.

What can do that and how can I fix this...

Read more


Hissing sound when driving around

For Sale: 1941 Ford 9N With Four Implements

mardi 28 septembre 2021

For Sale - 1941 Ford 9N with 12 volt conversion, starts instantly, no smoke. Garaged, overrun clutch and rollover protection included. Also included is a seat cover and two on-board tool boxes and a hitch bar. Also includes the original 6v generator and headlights and a box of original parts and manuals. This tractor has been in our family for 32 years. I added Red Rock parking brake extensions and a PTO handle extension to make it easier for the operator. I am also including a battery...

Read more


For Sale: 1941 Ford 9N With Four Implements

Trail Ride Week

lundi 27 septembre 2021

Been up in Wawa, Ontario all week atv riding. Had to take my wore out 17 year old Sportsman 500 H.O. because my newer 570 has been a lemon piece of junk since day one. The 500 has been a great machine, it's just getting really wore out. All the driveline has all kinds of play in, the carb is wore right out, even found a piece of circlip laying on the floor of my pickup today that holds one of the U-joints together.
But, it was the ONLY machine that had no issue the entire week, LOL But the...

Read more


Trail Ride Week

220-4 clutch rebuild

jeudi 23 septembre 2021

My clutch went out on my old 220-4 this weekend. Kind of surprised but the parts seem to be readily available. What I cant find is a 13 spline clutch alignment tool. Does anyone know where I can find one or have one that I could buy, rent, or borrow? I will pay all costs associated with getting it to me and be happy to ship it back if its a loaner. Any help would be greatly appreciated. Thanks yall.


220-4 clutch rebuild

Always Hot Battery Power Lead

mercredi 22 septembre 2021

Unless there is a substantial moon, our farm is darker than 10 feet down a well at night. Many times I've tried to find the keyhole or the glovebox knob in the dark and had to pull out my phone - if I had it - to make with the flashy light.

So some time ago, I bought a Kubota dome light. I know this is risky but I'd like to hook it up to non-switched, always on DC. That way, I can flip a switch on the dash to light up the cab. I am pretty sure I can feel my way to that.

I know there are...

Read more


Always Hot Battery Power Lead

RTV500 battery light on

Ok guys please help
Battery light in
Checked voltage at battery 12.7v OK
Started RTV
Voltage stayed the same
Should have gone above 14v if it was charging
Ok
Has regulator and alternator
Now how do I continue troubleshooting priblem
Chuck


RTV500 battery light on

Tiller 72 or 84?

Looking at tillers, my L4630 has a 72" footprint so looking for any opinions on whether a 72" tiller is ok or go to 84"?


Tiller 72 or 84?

In frame rebuild?

mardi 21 septembre 2021

Have a 2006 kubota rtv900 With 896 hours. I don’t no the history of what happened to create the engine problems but do know with testing the Engine has blow bye produced off #3 cylinder and weak compression in other two. My question is would it be beneficial to remove the complete engine and transmission for rebuild or try and do a inframe?


In frame rebuild?

New Snow Dogg Plow for RTV900

Yesterday I picked up a Snow Dogg "V" Plow for my 900. I think I got a good deal. the dealer had ordered it for someone last year and they never picked it up and he wanted it gone. Dealer was very nice to deal with and only about 70 minutes away. There are closer dealers, but they are in Vermont and I am in New Hampshire. We don't have a sales tax and they do. There was a guy there from CT and I asked why he would come all this way and he said between better prices from this dealer and no...

Read more


New Snow Dogg Plow for RTV900

Do you have rear view mirrors on your tractor?

lundi 20 septembre 2021

I've got a lot of seat time the past few days. Great weather for getting the brush hogging and box blading done.
I find it harder to turn around to view completely behind me than I used to. Old age I suppose, but I have mirrors on the RTV so why not the tractor? The front end loader bar that goes across the top of the hood would be a likely place to mount them.

Anyone else beat me to this and have mirrors on their tractor? If so what kind did you get and where did you mount them?


Do you have rear view mirrors on your tractor?

Mounting and Unmounting KFI Snow Plow.

Received my RTV X900 today. I purchased with a KFI snow plow. I took the plow off first thing as I don't plan on keeping it on until needed. It was difficult to get the pressure off the pins that hold the blade assembly to the RTV mount. I tried using a jack to make it easy to pull the pins but nothing seemed to relieve the pressure. I believe it is because I lowered the blade onto wooden blocks rather than putting it directly on the floor of my shed.

Also to free up the winch cable I...

Read more


Mounting and Unmounting KFI Snow Plow.

locked out of forum

Hi all members,

My user name was previously 1kubota. For some strange reason I could not login. I reset my password 3 different times to no avail. So I ended up re-registering using user name kubota1.

Larry Williamson aka kubota1


locked out of forum

RTV Boss Plow

samedi 18 septembre 2021

I'll post a couple pics here in case anyone is ever interested in getting a Boss plow for their RTV. I just put the three skid shoes on it today.

I haven't stiffened up my front suspension and don't think I need to. No real droop when I pick it up.

I am impressed with how high it lifts.

Later on I'll take it off and see if I am still going to be able to put my receiver mounted winch back on without removing the one part of the mount bracket, but it is only a couple bolts for that piece...

Read more


RTV Boss Plow

Doors for RTV X900

My dealer says my X900 should be ready next week. I have been considering doors for cold weather but would like some that can be easily removed as I do not want them on the vehicle for most of the year. It seems some type of fabric doors would be the best option but zippers and velcro closures seem like they would be a hassle. I saw some from Seizmic that have frames for $900 which seems a little high.

Any advice or personal experience on doors?


Doors for RTV X900

Kubota RTVs Not Considered UTVs

mercredi 15 septembre 2021

When making a general search for UTV accessories, most of the sites ask for a specific vehicle. Most of these sites do not include Kubota in their list of UTVs. Guess our machines do not qualify.


Kubota RTVs Not Considered UTVs

FYI: New Server Coming, expect some downtime

mardi 14 septembre 2021

I am upgrading to a newer server. It will require a new IP address. The server upgrade will not take long but since the IP will change once again all will have to wait for the new IP address to propagate the network. As usual some will propagate fast others will take a day or more before you have access. .

This is only a heads up so you are not taken by surprise.

I plan to start the process tomorrow.


FYI: New Server Coming, expect some downtime

Cheesy Hash Brown Casserole

We had a pot luck at work and someone brought this. I think it's worth sharing. Very good.

Cheesy Hash Brown Casserole

1 20 Oz package shredded hash brown potatoes
1 small can of cream of chicken soup
2 cups of shredded Cheddar Cheese
1 container of sour cream
1 stick of butter (melted)

Combine ingredients and dump into 9 x 13 pan.
Bake at 350 for 1 hour.


Cheesy Hash Brown Casserole

Kioti DK40 Stretching Fence

jeudi 9 septembre 2021

We're putting up new HT fence . Real heavy duty tornado like wire but stretches like a charm. The only problem I had was the DK40 being pulled backwards even with both brakes locked. But.. with a chock behind the rear wheels, it held like a tight drum or as they say a "fiddle string" .


Kioti DK40 Stretching Fence

Ford 8N value?

lundi 6 septembre 2021

I have a restored 1949 Ford 8N listed in the classifieds with pictures. Does anyone know here what the going value should be for one of these? Thanks for input


Ford 8N value?

RTV 500 Doors?

I was lucky enough that my father inlaw purchased us a RTV 500 a year plus ago. Got the roof, windshield and rear glass(that maybe plastic) but was sad to learn that I'm not able to get doors for it. Dealer says something like there's a flaw in the exhaust that leaks into the cabin.

Is this true, is there a hack to fix this? Have some owners figured out how to install doors?


RTV 500 Doors?

V4210 complete cabs only $1200

Wow,Reg. $5100 what a great deal, pm me for more details.


V4210 complete cabs only $1200

Dragging the Roads

dimanche 5 septembre 2021

Finally got some rain, so when it let up this morning I dragged the roads in the mine. Three big mine truck tires. They do a pretty nice job.


Dragging the Roads

Problem w/2020 X1100C

samedi 4 septembre 2021

My X1100C with 100 hours on it has a problem: when I turn the air-conditioner on, within just a few minutes the front fan begins to turn on and off, cycling every few seconds. The AC cools great; low and high pressures are good. The receiver dryer sight glass shows coolant level is okay. I have replaced the coolant sensor that screws into the thermostat housing and the relay under seat that controls the front fan.
The front fan continues...

Read more


Problem w/2020 X1100C

L2250 Tractor and Loader For Sale

I have a friend of over 30 years who is selling his Kubota L2550 4WD with a loader. It has about 2800 hours and everything works as it should. It is located near Grove City Ohio and I will help him deliver it within a reasonable range. If you are interested, please instant message me and I will put you in touch with the seller. Thanks.

Here is the specifications:


L2250 Tractor and Loader For Sale

Anyone Waiting on BXpanded?

jeudi 2 septembre 2021

Just curious. Is anyone waiting on an order from BXpanded?

If so, how long since you placed the order?

Great company and people but they are under the same supply line and labor shortages everyone else is. They use American steel which is apparently difficult to obtain, even with supply side contracts.


Anyone Waiting on BXpanded?

A Good Ford 9N Forum?

I have a 1941 Ford 9n that I am restoring to full function. Not a show tractor...just something I can use around the farm. Is there a forum anyone knows of for these old work horses?

Thanks


A Good Ford 9N Forum?

x1100c ...What is the difference between H and L

mercredi 1 septembre 2021

Some of my hills are a challenge for the RTV due to rocks sticking up, or slippery muddy areas. So I put the RTV in 4wd and go for it. I usually make it up the hill but once in awhile have to back down and give it another shot. I've made it up the hills while in H, and while in L. I do not notice a difference in the RTV's performance.

Can someone explain the difference in H and L please. Thanks.


x1100c ...What is the difference between H and L