Kubota add on windshield wiper

So time is drawing nearer to the X1140 coming into my dealer. Quick question for you Kubota experts. I am considering the add on windshield wiper kit. I am getting the glass windshield and wondered the pros and cons to the windshield wiper. Only down side is it doesn't come with a sprayer like the windshield wiper on the X1100c. I see the benefit in the winter or if I am caught out when it really starts to rain. Other than that, without the sprayer, dust will have to wait until I could...

Read more

Kubota add on windshield wiper

RTV backup camera

I'm finding the downside of the new Curtis/Kubota MKII cabs is the difficulty in mounting outside mirrors. My wife has a Prius that has a backup camera and while driving it the other day, I thought that one of those might solve my RTV rear view problem.

Looking at aftermarket cameras showed most of them have a limited angle of vision but I finally found this Pyle PLCM7700 that claimed 170 deg vision angle and was about $70 w/free shipping from Amazon.

Judy approved the purchase as an early...

Read more

RTV backup camera

RTV 900 Muffler

Greetings All -
Did the "not recommended" cut off of the spark arrestor on my RTV900. The tailpipe kept following off due to excess vibration. I welded the pipe on several times over several years - but it kept falling off - the weld help but the hole got bigger. Long story short - I bought a new muffler (Kubota - over $400) and replacer the entire assembly. I've got the old one if anyone wants to pay for shipping - I'll send it along. If you are handy with good welding and innovative...

Read more

RTV 900 Muffler

First Snow & First Time With Plow

We had about 4" of snow overnight and I got to try my new SnoDogg plow. I had to adjust the mount height an inch and that helped. No frost in the ground so had to bee careful and still dug it up some. Several days of cold temps will put some frost in and then the plowing will go much better. I love the plow. Takes less than 3 minutes to put it on or off. I store it on a dolly and I just roll it up and tip the lift frame up and set the lock pins, plug it in and we are off!!

First Snow & First Time With Plow

LED Headlight Bulbs RTV X1100C

New to this forum so a big hi out there to everyone.

This week I purchased a slightly used (565 hrs, 2,500 miles) 2018 RTV X1100C to replace my old worn out Carryall 295 (7,000 hrs) at work. All fluids/filters/belt replaced, any and all lubes done and a thorough check out confirms that machine is 100% and ready for work. It came extra with front CV guards, rear view and side mirrors, POS radio and cargo bed was sprayed. Kubota branded signal/hazard light kit, rear CV guards, rear window...

Read more

LED Headlight Bulbs RTV X1100C

Tiller 72 or 84?

Looking at tillers, my L4630 has a 72" footprint so looking for any opinions on whether a 72" tiller is ok or go to 84"?

Tiller 72 or 84?

Wildlife Safari In Corbett National Park

Corbett is one of the best tourist destinations in uttarakhand which is well known for its wildlife and wildlife safari as corbett is covered with lush green dense forest so it offers you beautiful tour in corbett and best destination for holydays and camping Wildlife safari is an adventure that allows a wildlife freak to explore the deepest secrets of the wild. It takes tourists to the trails of untainted horizons of forests and it is for enjoying wildlife photography in the best way...

Read more

Wildlife Safari In Corbett National Park

Newbie Considering X1140, Feedback Welcome

Hi all, as you can see this is my first post. I have spent untold hours researching and narrowing my choices for my first RTV/UTV. A little background: My wife and I own 15 acres with 11.5 in woods in west central Indiana (no real steep stuff). I currently own a Yamaha ATV that is now 22 years old. It has served me well but has required various rebuilds over the years. At 53, I now have two artificial knees and arthritis in my back and neck and would like a utility vehicle to maintain...

Read more

Newbie Considering X1140, Feedback Welcome

Happy Thanksgiving!!!!!!

Happy Thanksgiving!!!!!!

RTV-X1100C Recall

Just got home and had a recall notice come in the mail for my RTV-X1100C. Says it is for the floor mat warping or separating from the underlay.
Guess they are replacing the floor mats.
Mine is good so far but guess I'll have to see about getting it replaced.

RTV-X1100C Recall

RTV500 Servo Adjustment

I have 45 hours on my RTV500 and will be doing my 50 hour service soon, if I don’t scrap it first. I know this whole thing sounds a little redneck, but, on a hill, my RTV500 will not “downshift”, as it runs out of power, I just continue to release the throttle-servo controller until I am down to a fast walking speed. When the unit was new, I did seem to get just a little “downshift”, but now, nothing. I have lots of power at “walking speed”, I just cannot achieve higher RPMs unless I am...

Read more

RTV500 Servo Adjustment

Fuel filter

I have a BX 2200 what is the cover behind the fuel filter on the engine block. It is held on with the two nuts holding filter bracket?

Fuel filter

glow plugs DK45

My DK 45 is starting hard with lots of smoke.

Replaced glow plugs, and associated 70A relay. New ignition switch.

I am reading 8.4 V at the third glow plug on a cold start and it does not increase with time until the controller shuts down.

Suspecting that the pre heat controller is not functioning properly?

Anyone out there with an ohmeter and a DK 45 that can test their voltage as the glow plugs heat up, or anyone know what this may be? Thanks so much.

glow plugs DK45

Sold my RTV-XG850

Had it for two years and only 17 hour and 165 miles on it. Wife wanted it so I buy then she ends up with both knees replaced
We had mini horses about mile from our home we were to ride it to feed, we did few times. I wasn't that wild about it, didn't care
for the throttle off idle ( had the kubota fix done)..didn't help that much. Plus I didn't want to add signals, windshield, tag, our
town pass some ordinance cracking down on AVT, RTV, they even tried it on tractors..Anyways the RTV got a...

Read more

Sold my RTV-XG850

Had a Look

I'm still looking at what I want to replace my two atv's with, since I still want something a bit faster than my RTV-X1100C for the trail rides with my friends where we need to do some roading to connect trails.

So today I saw the Roxor featured on a news show on RFD-TV. So I looked them up online as I was kind of interested. It says the Roxor is not available in Canada??
I wonder why that is?

I also still kinda want an Argo. I like the idea of being able to drive onto the lake and go...

Read more

Had a Look

wireless remote for Kubota winch

Any suggestions for a wireless remote for a Kubota inch? preferably plug and play.
Thanx

wireless remote for Kubota winch

Patiently Waiting

Just need a few more feet of snow!

Had it out to haul more firewood to the house.

Patiently Waiting

Anyone got Creative on In cab Storage / Console for your RTV's ?

Wondered if any of you Have gotten Creative with custom cab storage / Console for your RTV ?
Dash pockets ??
I see a utv console or two online but looks like would mostly just get in the way. And have to be cut or modified to fit.

Some one should make a Kurig Coffee maker to go in one this thing..lol

Anyone got Creative on In cab Storage / Console for your RTV's ?

universal turnsignal kits

Anyone installed these on a Kubota RTV? I didn't know if you had go with kubota kits or if any of those universal kits would work

universal turnsignal kits

Finally migrated here from FF

Hey everyone, I'm fashionably late to the party here coming over from doc's main forum. Looks like I could gain some knowledge over here. I'm up in northwestern Ontario Canada about a 15 minute drive west of Lake superior.

I have a Jacobsen turfcat diesel 4x4 with a 72" front mounted triple mower deck. I've also got a couple atvs and a utv. The atv's are a 1989 yamaha breeze 125cc I inherited from my grandfather and a 2002 polaris sportsman 700. I don't use the polaris much anymore as a) I...

Read more

Finally migrated here from FF

RTV 900 Front Drive Axle Upgrade/Replace

I believe that you can replace the ~ 3 piece front drive axle (from the transmission to the front transaxle) with a one piece CV type long drive shaft. Does anyone have any experience with these and where do you find them including the selling/manufacturing company name? Also, how do you match up the correct part number as there are no numbers on the old multi piece drive shaft and all I really have is the Serial number off of the manufacturing plate behind the cab. Not even sure when...

Read more

RTV 900 Front Drive Axle Upgrade/Replace

RTV 900

I believe that you can replace the ~ 3 piece front drive axle (from the transmission to the front transaxle) with a one piece CV type long drive shaft. Does anyone have any experience with these and where do you find them including the selling/manufacturing company name? Also, how do you match up the correct part number as there are no numbers on the old multi piece drive shaft and all I really have is the Serial number off of the manufacturing plate behind the cab. Not even sure when...

Read more

RTV 900

RTV-900 rear differential Problem

Newbe to these forums. I have read a lot here over the last several years, but have just now joined so I could ask a question.

I recently replaced the u-joints on the rear axles of my 2007 RTV-900. I now have a squeaking noise (sounds like something binding) in the rear of the machine, and the machine feels like something is holding it back. I jacked the back end of it up to see if I could tell what was wrong, I could manually turn (in neutral) the left rear tire, the right rear feels as if...

Read more

RTV-900 rear differential Problem

Tires

I was looking at the first couple RTV1120's our mine got for underground. They have these tires on them in this size.

I'm not home to check, but they look taller than my stock Worksite tires on my 1100C?

https://www.tirerack.com/tires/tires.jsp?tireMake=Kumho&tireModel=Road+Venture+MT+KL71&partnum=785QR4KL71

Tires

Noise in 900 rtv front end

I have a rubbing not clicking noise in drivers side front end on rtv 900

Noise in 900 rtv front end

Best aftermarket RTV accessory dealer

Just took delivery of a RTV 1120 and curious who some of the good reputable dealers are for aftermarket accessories?
Thanks

Best aftermarket RTV accessory dealer

Always Hot Battery Power Lead

Unless there is a substantial moon, our farm is darker than 10 feet down a well at night. Many times I've tried to find the keyhole or the glovebox knob in the dark and had to pull out my phone - if I had it - to make with the flashy light.

So some time ago, I bought a Kubota dome light. I know this is risky but I'd like to hook it up to non-switched, always on DC. That way, I can flip a switch on the dash to light up the cab. I am pretty sure I can feel my way to that.

I know there are...

Read more

Always Hot Battery Power Lead

kioti fuel injection parts

HELLO FROM KOSTAS. I recently bought a kioti dk450 600 hours working time. unfortunately fuel pump is off due to broken parts, gears an ruler. In Greece where i am from can not find these parts and kioti dealer, claims that Koreans still do not aswer in his question 2 weeks now. is anyone who knows where can i buy this part from. preferable from europe for soon shipping, and no taxes. thank you

kioti fuel injection parts

Opps ...Mishaps, accidents etc ...

Saw this on another page. I’d love to know the backstory to how this happened

Opps ...Mishaps, accidents etc ...

How's this for an ATV?

Got to play with this today! I thought it was Kubota powered as the Sherp brand is, but this one is a Cat (which may still be a Kubota as the Cat mini ex's and CTL's use yellow Kubota's.

How's this for an ATV?

Glow plug lamp

I have an L48 Kubota tractor, when I go to start it the glow plug lamp comes on, wait a few seconds and she fires right up, and the lamp goes out …..however twenty minutes later while working it the lamp will come on again for 30-60 seconds and go out….this repeats at odd intervals while working? So is it a bad air temperature intake sensor or the relay or???

Glow plug lamp

Removing rear cv axles on 2015 X110c

Any suggestions or tools I might need to remove the rear axles? Does not seem to have a lot of room to get a tool behind them to pop them out

Removing rear cv axles on 2015 X110c

RTV1140 Dump bed problem..

Hello.. have a RTV x1140 with about 127 hours on it. My dump bed stopped working.. Fluid level is good, all connections are seated correctly. I can hear it engage but no movement on the bed. Dealer has a 4 week wait and I am fairly sure this is something simple. Any suggestions? Also shouldn't you be able to manually raise the bed when you float it? Can't get the bed to move at all.. Any help would be appreciated.

RTV1140 Dump bed problem..

Veteran's Day

Thank you Veterans . Your bravery and protection of our freedom is cherished. God bless you.

Veteran's Day

25 psi charge pressure

Hi everybody. Been lurking on here for a little while, and want to say thanks for all the help that's been provided. I've been able to find a ton of information on past threads; hopefully I'm not posting a question that I just could've searched for.

Little back story: 2015 RTV X900, doesn't move at all. I bought it from a guy for $2500 knowing this, and also noticing that there was ATF in the transmission and in the hydraulic tank. He took it to the dealer and they told him it would need a...

Read more

25 psi charge pressure

Parts for Curtis plow hydraulic lift conversion

There have been a few photos and brief discussions about converting a Curtis plow for and RTV to hydraulic lift, but I haven't been able to find a [recent] parts list. I want to make this conversion, and don't know much about hydraulics. So, please help me out. Here is a list of what I can think of that I will need. Let me know if the products I am listing are adequate (or if there is a place to get a better product/price)!

Lift cylinder 2X4X1.125 SAE8 - size OK? $59.95...

Read more

Parts for Curtis plow hydraulic lift conversion

Hello from Idaho

just came over from FF. Some may know me as "mla2ofus". I have a wheel horse made into a leaf vac complete with a trailer behind it, an old craftsman lawn tractor with a single stage snowblower I bought and refurbished this summer and curious to see how well it works. Also have an old 30" Dixon with the cone drive tranny and printed instructions on how to adjust the tranny or overhaul it. Have a '96 Suzuki 250 4wd wheeler with snowplow also a Poulan 24" 2 stage snowblower that's been a...

Read more

Hello from Idaho

rtv-x900 hyd change

I have an rtv x900 and changing out the hyd. fluid and filters, yes all Kubota stuff. Since we have a dipstick for the trans. and one for the hyd. tank how much goes where? I know the capacity is 2.6 gals. but where does it ever state the trans holds this amount and the hyd. tank holds this much? I'm pretty sure I checked at 1 1/2 gal, talking with a neighbor, and it did not register on the stick for the trans. When I put the rest of the two gals. in now it's about 1 inch over full on the...

Read more

rtv-x900 hyd change

L3130 engine randomly cuts out

This tractor has about 1900 hours and starts and runs fine. Fuel filter recently replaced and fuel regularly conditioned with Diesel 911. My fuel is pumped into the tractor through a filter and water separator on the fuel barrel. However, the engine randomly cuts out. When I turn the ignition to restart as long as I hearing the 'click' when the switch engages the engine starts fine and purrs like a kitten. If there is no 'click' sound it cranks and won't start. Often when it stalls I...

Read more

L3130 engine randomly cuts out

X1100C Dump Bed Hydraulic Question

I recently repurposed the dump bed hydraulic circuit to operate the angle feature on my snow plow. I control the angle from the dump bed lever but it is jumpy and a little too sensitive. Can someone tell me if the system has a built in flow restrictor to adjust the fluid flow rate for this circut? I know I can install two line throttle valves but before i invest in these I would like to know if there is any ajustment in the machine itself I could look at.
Thanks

X1100C Dump Bed Hydraulic Question

Massy Expresso Machine

I know! Out of left field for sure but,,,, did massy ever make Expresso Coffee machines.
I just recently saw one and was pretty sure someone was yanking my chain.
if the did make them are they collectible.
Here is a pic
Thanks

Massy Expresso Machine

26 inch tires on RTV900

Mornin' folks.
I just talked to my tire guy, and UTV tires are really hard to get. 1st time since 1974 i will buy tires from someone else.

So i am looking at Carlisle Versa trail 26X11X12s. My machine is a tired old 2005 RTV900. Any input on whether these would be too much for the old girl?
Appreciate your input.

26 inch tires on RTV900

Roxor Helps Save a Calf

Been busy on the farm and with the moving from old homeplace these weeks too. Last night, we ate supper at 10 pm because we had to fish a little newborn muddy cold calf out of the pond's edge. It was abut 5 :30 , I rode in the sled to keep it in , after,, even though it was tied, flopped out 2 times. The 4 whlr pulled the sled about a mile through the pasture to the truck because I left the Roxor there after using it's winch rope to make a steady anchor for us and we got the calf out...

Read more

Roxor Helps Save a Calf

RTV HST Adjustments

Thought I would start a new thread on this issue that may just help many with shifting problems on the RTV series machines.

We will see as you will be the testers of my conclusions. ha ha ha

I had 2 machines; 2008 RTV900 standard model that I added a plow and cab to and enjoyed lots of winter snow plowing for 2 years. Then traded it for RTV1100 which I eventually added a turbo to and of course had adapted the plow on for another 3 years of plowing fun. Neighbors loved me. ha ha ha

Ended...

Read more

RTV HST Adjustments

New battery in my ATV is dead already

I bought the battery last May. Installed it. Ran the ATV some. Then hooked up a battery tender to it. Used it a few times in June / July time frame. No issues. Went to start it in early Oct and it was dead as a doornail. Nothing. Battery tender appeared fine.
Frustrated but I was getting ready for a little FL vacation so I left it sit. Got back to it yesterday to take the battery out of ATV and back to Auto Zone. I fear it was only a 90 day warranty but figured it was...

Read more

New battery in my ATV is dead already

X1100C No acceleration going "Down Hill' After Full service at Dealer .(See Post 16 for fix)

Hey Fellas, Ive had some heart troubles and been kinda down for a while . Feeling lazy and didnt have the energy to change fluids and whatnot so I Though.. "Well I will take it to the dealer and let them do it right "
So Dropped of one day picked her up the next . Noticed coming off trailer something was different. ....
So I ride it around the property for a min .. Still climbs hills as well as it did maybe.. BUT NOW When you go DOWN the Hill
Let off peddle and trans does the...

Read more

X1100C No acceleration going "Down Hill' After Full service at Dealer .(See Post 16 for fix)