Thinking again of trading the rtv for a roxor

Are you happy with your roxors? It appears that the money might be an advantage to trade my x1100c or sell it and buy a roxor. I like the all weather model..
Advice welcomed

Thinking again of trading the rtv for a roxor

K connect

Does anyone have the K connect system on there 1100? Can you take the whole system off in the summer for more ground clearance?

K connect

Rtv x1100c 10,000 mile service

Serviced out the old rtv x1100c today. At 10,000 miles on the odometer and approaching 2000 hours. The gearbox had just a bit of metal on the magnet and the hst is working better than the day i brought it home.

Rtv x1100c 10,000 mile service

Kioti frontmount blower

I sold my Kioti CK30 tractor which I had a KS66-220FM blower on .
I purchased a Massey 1736 tra tor in which at time of purchase i had the dealer install a mid pto. Small amount of fabrication and the blower was mounted. Some time later I finally got to try the unit out and to my disbelief..the blower is running backwards..what can I do ?

Kioti frontmount blower

V plow

Is a 60 inch V plow big enough to cover the wheels on a x1100?

V plow

The "NEW' 2024 RTV-X Model

Welp......According to Messicks video, the RTV X900 and the RTV X1120 models are going away and will be replaced with: The 2024 RTV-X. (Marketing Genius! Never mind how confusing that name will be at the parts counter) Comes in all the usual colors, plus Sand color. Will use the RTV X1120 engine, the bed sides will all fold down to make a flat bed, new tire design, comes with low beam LED headlight bulbs, but if you spring for a major upgrade package, they will...

Read more

The "NEW' 2024 RTV-X Model

RTV X1140 No Movement or Drive, HST Problem

Kubota
2017 RTV-X1140
1074hrs / 6798 miles
I have WSM RTV-X1140 (Rev. Date 08/21) (PN 9Y111-09968)

History:
Purchased at auction, was used by a construction company.

Maintenance:
Generally, looks to have been good, all grease fittings I looked at were freshly greased. Oil & hydraulic filters had Hours & Date written on them and were close to the 1070hrs on the Operator screen.

Condition at purchase:
The motor would start and run.
The unit would not move forward or reverse.
The...

Read more

RTV X1140 No Movement or Drive, HST Problem

RTV-X1100c won't pull itself up a hill.

My dad asked me to look at his X1100C. It will pull itself around somewhat on level ground but any sort of incline, it stops. Plenty of throttle. So he already changed filters and fluid. I thought the brake linkage was stuck. They are working fine. Not knowing anything about this transmission (I'll look it up) but has anyone made any adjustments or are there valves with o-rings or something to cause oil to be bypassing. If it had clutches that's what I'd be replacing. That's what it feels...

Read more

RTV-X1100c won't pull itself up a hill.

Here's a "Talk About Anything" - II

This is just like the old one, talk about whatever.
The other thread is getting a bit too large so we'll use this one going forward.
The other will remain but this new one should reduce overhead and load times.

Here's a "Talk About Anything" - II

Aftermarket starter

Does anyone know of an aftermarket starter for a 2019 kubota sidekick 850? I really don’t want to pay the dealer $600.00 for one. Any help would be greatly appreciated.

Aftermarket starter

2018 RTVX900 no 4wd

Hi. Brand new to the forum.
I recently acquired a 2018 RTVX900 that had been used at an underground copper mine. It had been parked for a couple of years. The environment there was very corrosive. The mine did regular maintenance on the machine.
I have it mostly back up and running and mounted a snow plow. Unfortunately it doesn’t want to go into four wheel drive
Oil levels are all good, haven’t been able to check the front diff yet. I disconnected the 4WD shift cable at the side of the...

Read more

2018 RTVX900 no 4wd

Underpowered 3 point

Have an HD 2680 that the 3 point won't lift a 1500 lb bale. Why? Front end loader also seems underpowered as it won't lift the same bale unless the bypass is shut off to the 3 point. Any thoughts on what is the problem. Location is Eastern Oregon

Underpowered 3 point

ioti CK4010SE - RPM's won't increase past idle

Hi,
I have a 2022 Kioti CK4010SE with about 40 hours on it, and today I could not get the RPM's to increase. With this tractor, when you start it, regardless of the throttle lever position the RPM's start out really low. So usually you just move the throttle leave up and then down, and then the RPM's increase to a normal operating level. Today though moving the throttle lever does nothing and so the tractor won't increase the RPM's at all. I'm at a complete loss as to why this is suddenly...

Read more

ioti CK4010SE - RPM's won't increase past idle

Front hub diagram for Kubota 900 rtv

Front hub diagram for Kubota 900 rtv

Front hub diagram for Kubota 900 rtv

Mahindra 4x4

Used the 4x4 today, now can not seem to get out of 4x4, any suggestions as to why, has anyone else had this problem with a 2016 2538 hst open station?

Mahindra 4x4

Wavian Jerry Fuel Cans

Not much discussion about these, I figured I would maybe attempt to revive it, since fuel cans seems to be a touchy subject. What type of fuel cans does everyone use?

I used to buy what I could find locally, TSC, Auto parts store, etc. Those were the plastic 5 gallon cans, in red and yellow, from assorted manufacturers. All of them were the dreaded Obama cans. They all leaked everywhere when attempting to pour, nozzles snapped off, valves broke, can necks cracked, plastic seams...

Read more

Wavian Jerry Fuel Cans

Kubota heater

my coolant gage shows the coolant has warm up a little but heater dose warm up enough to feel it. Any ideas.

Kubota heater

Website title

I just wonder how this website started out and how it has evolved since then. I'm not necessarily a frequent visitor here, and even less frequent contributor. But I do find it interesting that the name is Net Tractor Talk yet tractors are rarely discussed here. Example. At this point in time today of thirty one posts on the New Posts page one is on other topics, one is on lawn and garden machinery, one on tractors, and twenty eight on RTV's. Interesting

Website title

I think I gelled by diesel fuel up

I haven't run the 1100 since Monday, when we got our 9" of snow. Last night, we got an unforeseen low of -10F. The 1100 sat under the carport today, while our temps went to a balmy 22f for a high today. The wife wanted to get out and see the snow this evening when I got home from work. So, we jumped in the 1100 , which started right up and slowly drove down to our woods, took a couple of trails through the woods at just over idle speed and I was coming through a back field when she just...

Read more

I think I gelled by diesel fuel up

2009 Rtv 500 help!

I have a 2009 Rtv500. Not really looking for speed as much as TORQUE. The rtv cranks right up, and shifts fine. But bogs down so easy just on alittle slope in yard. It’s super slow. I seen where people said adjust servo screw but where is it?

2009 Rtv 500 help!

Front PTO Electric Clutch

Looking for some help finding a Front Electric clutch for a snow blower on my John Deere 750. Model number CH18191 don't know if Yanmar have a different model number for the clutch. Thanks for any help i can get.

Front PTO Electric Clutch

Belt screech during normal steering—Normal?

My one year old RTV x1100c makes a lot of belt screech noise even when steering normally. Is that typical or something that needs an adjustment? It sounds like when you stress a power steering unit by rotating the wheel all the way to the stop, but happens even when in the middle of the travel. Is it as simple as a belt tightening? Your thoughts/advice welcome. Thanks.

Belt screech during normal steering—Normal?

RTV Daily uses, What did you do today with your RTV?

I finally got my RTV back from the dealer. While there fixing the linkage that slipped out of sync, I had a few other things done that by themselves were not worthy of a trip to the dealer. Left melted headlight fixed, fuel gauge replaced (it had been intermittent but turns out it was the gauge, no labor for replacing). I also had tubes put in the rear tires and I got the hand throttle yall had been talking about. Awesome.

So today I used the tractor FEL to load gravel in the RTV and...

Read more

RTV Daily uses, What did you do today with your RTV?

X series straight shifter upgrade kit

I have a x900 and came across this straight shifter upgrade kit. The part number is 77700 11119. Trying to find out why kabota made it and what improvement it does. Kabota calls it an "upgrade ". Not cheap at 200 dollars.. Anyone have information on it?? If it makes shifting easier may be worth it? Thanks

X series straight shifter upgrade kit

Injection Pump and Governor adjustment on D1105

Can anyone tell me what the 3 screws that are capped off near the injection pump are on my D1105? I have attached a pic for reference. I know they are screws for adjusting the governor/fuel delivery, but what does each one specifically control? How does adjusting one affect the other, or is there no correlation between them. I ask because I have ordered a turbo kit for my RTV X1140 and reading the different install instruction from different designs from different companies to get a handle...

Read more

Injection Pump and Governor adjustment on D1105

X1100C replacement tires

I'm had my 2023 X1100C for 8 months and 170 hours. The tires are about worn out. Is this normal? What are a good replacement tire that will hold up to thorns and the like?

X1100C replacement tires

New Holland C238 Skidloader

I have a C238 New Holland Skidloader. The DEF level is not accurate. It will go from Full....and drop to just a few bars showing. I have changed the DEF Level sensor($740)....and that didnt help! Anybody have an issue like this?

New Holland C238 Skidloader

Snow sticking to Boss Plow

I have a X1100c with the Boss V plow. I installed a 2" pipe on the bottom of the plow cutting edge for the gravel driveways. Pipe works fine but even after trying numerous spray lubes on the blade I have a big problem with huge amounts of snow sticking to the blade. I think the pipe sticking out on top of the cutting edge is part of the problem but the whole blade is holding the snow. We do get mostly wet snow, so I know that contributes to the problem. I bought this unit almost new but the...

Read more

Snow sticking to Boss Plow

RTV x1100c quick hitch stuck

Just got an rtv x1100c with front quick hitch, 2 function hydraulic control (v5232) and blade.
Hitch with go up, but not down. I can hear the solenoid make a noise but it won't allow oil through the hose.
Had one like this awhile back that had a switch wired in so that when activated the hitch wouldn't lower. This one does not have that switch.

Can anyone shed some light on the matter?

RTV x1100c quick hitch stuck

Door Panel Removal

Hi Folks,
I have to tighten the passenger door handle on my X1100C. Upon looking at the door, I assume I will have to remove the orange panel on the exterior of the door to access it. Is it as simple as it looks to get off?

Door Panel Removal

Found a much improved headlamp upgrade.

Last summer I replaced the #896 halogen lamp with an LED replacement. I bought these off of amazon;

Antline Extremely Bright 50W High Power 881 889 886 894 896 LED Fog Light Bulbs Xenon White for DRL or Fog Lights (Packs of 2) ​

I was very disappointed. They are worse than the OEM lamps. Now that I'm working on dressing out the new 1100C, I found these from Alla Lighting. The model is 881-FL-BH-HL;

Link

I installed them last night and the difference is dramatic. The...

Read more

Found a much improved headlamp upgrade.

RTV X1100C cabin air filter

has anyone found a reasonably priced alternative to the cabin air filter on the X1100C ??

RTV X1100C cabin air filter

Happy New Year!

Hope you all have a happy, safe and prosperous New Year!

Happy New Year!