Built my first bale rack

This is my attempt at a bale rack on one of my wagons. I'm very happy with how it came out. Bought the metal at the scrap yard. Had $550 in it. Now have 6 more... 8x20 to build. I will be welding till hay season lol.

Attached Thumbnails

• 


• 

Built my first bale rack

Baler Belts for a New Holland 740 Silage Special

Hi

We are going to put new endless belts on our baler this year. Which are the best? Should I just buy the orginals or buy else where. Shoupe has a good buy or are they not the same as the ones that came on it?

Thanks

Vaughn

Baler Belts for a New Holland 740 Silage Special

Gryphon agena bec sælges

For en klubkammerat sælges et stk, helt ny gryphon agena bec, da den var med i hans beam e5 archon kit. Men han skal ikke bruge den alligevel.



Nyprisen hos fast lad er 540kr.



For mere information kig Google.

Gryphon agena bec sælges

V: funtana X100 Hangar9

Da jeg ikke længere har mulighed for at flyve med denne sindsyge dejlige flyver, må jeg nok indse, at den skal sælges.



Men hvad kan man tillade at tage i pris?



Funtana x100

178cm i spænd

Carbon understel

4 7kg jr digital servoer på kræng og højde

1 aec 13kg digital på sideror

100A turnigy regulator

Hyperion 4035 motor

5v regulator

Skal have strammet lidt folie op, og halehjul skal påsættes.

Der medfølger ligeledes Vingepose, og Sideforce Generators, som aldrig har været brugt.

2x Turnigy nano-tech 3300mah 6S 45~90C Lipo Pack medfølger også - har fløjet 4 gange :P

V: funtana X100 Hangar9

Fpv

Heys.



Er blevet lidt lun på at få billede fra mit kamera ned på en skræm (Ikke briller endnu). Der sidder allerede et kamera på min maskine, der er allerede en 5,8 GHz sender - så jeg skal vel bare have en modtager og en skærm.



Kan I anbefale mig noget i forhold til at komme billigt i gang? Jeg er stadig i en fase, hvor jeg vurderer om det her flyvning er noget, der bider sig fast eller bare en "døgnflue" - omvendt hvis det er en relativt beskeden investering, så vil jeg gerne have billede på når nu det andet grej er til stede :-)



//M

Fpv

loddegevindstykker 2 mm

loddegevindstykker 2 mm fejlkøb 8 poser a 10 stk'

10 kr posen + forsendelse

micu

loddegevindstykker 2 mm

Lights on New V4210 Cab

Got my new cab and thought it should have some new lights. I thought they should be relatively low profile so I could still get it in the garage w/o ripping them off.



My thanks go out to Tailrotor and 71sschevelle for their previous posts on LED work lights.





I decided to go with a 20" 126W light bar for the front . It has 24 floods and 18 spots which I think is an excellent combo for a UTV. I bent a piece of 18" wide .050 sheet steel to add support to the roof where I mounted the light. It is bolted / sandwiched between the roof frame and the roof.





For the back I went with a pair of 18W LED floods .



I couldn't be happier with the purchases.











Just Headlights





With work lights



I also added six marker lights to the cab (2 per side and 2 on the back) and connected them to a strobe controller .

I live on a back country highway. I wanted to make things a bit safer when plowing and didn't want to mount a beacon on the roof which would again hit when going into the garage. The marker lights are armored so there shouldn't be an issue if the occasional tree branch hits them.



Wiring:









Here you see two switches below the main switch panel that I added for the strobes. The one in front is a SPDT switch that will either turn on the strobes via a constant 12v lead or tie them into the hazard switch. That way if I can set it so they come on when I turn the hazards on. The second switch further back changes the mode of the strobe controller. The two silver screws even further back mount the strobe controller.



I'm liking it all so far, can't wait for more snow!

Lights on New V4210 Cab