NH 1068 and 3/4"-16 Swivel Fittings?

mardi 3 juillet 2018

I went to replace a waiting-to-blow hose on a 1068 bale wagon that feeds the hydraulic motor on the bale loader. The bulkhead fitting that passes through the frame provides a male 3/4”-16 fitting to attach the female swivel fitting on the hose to. Given the two hoses there have such a crimp on fitting, they did exist at one time. But, two local hydraulic shops, the dealer and their Parker rep later, no crimp on fitting yet identified. There’s a number of ways to jerry-rig a solution, but the purist in me would rather replace as is or preferably adapt to a more standard fitting (looks like early 1068s started with an NPT adapter in place of this, and later changed to JIC, so the 3/4"-16 fitting is a serial number blip). Plus, it seems like it should be simple enough.

 

Anyone dealt with this? Maybe have a part number for crimp-on female swivel hose fitting that work with 3/4"-16 compression? Or a bulkhead adapter from compression to JIC/NPT/ORB, etc.? Might these be female ferulok flareless swivels (Parker 11243-8-8)? Just wondered what others have done...



NH 1068 and 3/4"-16 Swivel Fittings?

Sorghum Sudan planting

So this will be my 3rd year planting SS however I've always been able to get it in on time. This year not so much. The ground is dry, no rain in the forcast and the clay soil is brick hard chunks. Drilling in with a 5300 soybean special.

Should I wait until rain or go for it? I just got done with 6 acres but have another 20 to do. I'd rather get it in if it will hang out and wait for the rain compared to waiting for the forcast and not having the time due to my job.

Any tips?

Sorghum Sudan planting

Fence line brush control

For years, I have been spraying my fence lines with brush killer to keep the brush from growing up through the fence.  I get a lot of brush hereabouts--much of my pastures are bounded by woods.

 

Two years ago, my neighbor planted peach trees on their land right next to one of my more difficult pastures to control brush growth.  Peach trees are planted about 25' from the fence line.  Now, I know peach trees are tremendously susceptible to 2,4D and the likes.   (BTW, the recommended set back for planting peach trees is 60'.)

 

I need to control the brush growth in this pasture but am very worried about damaging their trees.  

 

Have any of you used Spike 20 or something similar?

 

Any suggestions?

 

Thanks

 

Ralph



Fence line brush control

they say i need a foot cut off

lundi 2 juillet 2018

I don't know what to do!! now my hose will be to short to reach the tomato plants!!!!


they say i need a foot cut off

July Hay Report.

Progressive Forage Grower.

 

Regards, Mike

 

https://www.progressiveforage.com/news/hay-market-reports/hay-market-insights-2018-hay-acreage-bouncing-back?utm_source=Progressive+Publishing+Notifications&utm_campaign=165c5da9b9-07022018_pf_hay_report&utm_medium=email&utm_term=0_67d5f32817-165c5da9b9-87278301



July Hay Report.

B&D Rollers. Anybody using them?

I am looking at upgrading my stock chevron rollers on my 1431. I was wondering if anybody out there is running B&D rollers and if they like them and any other feedback would be great. Thanks 



B&D Rollers. Anybody using them?

useless bits of information

been doing chores with the bota and just bored to tears. so i came up with the idea of testing the speed of the X1100C with stock tires,hot humid weather and soft sandy roads before i switch to a different set of tires. i used a garmen gps to run the tests. but first i needed to check the accuracy of the gps so i hauled it around in my truck and scientifically check it against my speedo,all was well. i then decided to get the local police radar to check truck speed against their radar thingy along with the gps,all was well. "so much for scientific". i then began hauling the gps around in the X1100c to see if the speedo in it jived with the gps. what i found was after the oil warmed up on mild grade soft surface roads the speedo would read 24 and the gps would read 24.8 or something and when the speedo read 25 i was more near 26 and a few times i made it to 29 on the gps. so my scientific conclusion is that most of the time the actual speed is nearer the next higher valuation on the factory speedo. i wonder what bigger tires will do ? i also wonder if the turbo version would lug less and carry more speed?:whistling::starbucks::17875:


useless bits of information