Does anyone know if Peanut's stick stoppers will fit a RTV500? If not, any 500 owners have another option for boot protection?
Stick Stopper Compatability
F3B BRISK / Stratair
Jeg er ved at opsætte denne model, og vil gerne have mulighed for at bruge
Flaps til speedflyvning , men savner målene. Stratair har ikke svaret i over en måned, derfor denne henvendelse til Jer.
Hvor mange mm/ grader vil I løfte / sænke flaps til denne form for flyvning ??
Godt Nytår
Poul
Flaps til speedflyvning , men savner målene. Stratair har ikke svaret i over en måned, derfor denne henvendelse til Jer.
Hvor mange mm/ grader vil I løfte / sænke flaps til denne form for flyvning ??
Godt Nytår
Poul
F3B BRISK / Stratair
Hay ground lease/share crop options
I would like to hear about different lease or share crop rental arrangements for mixed grass hay ground. Would also appreciate any comments or in sight into my situation. Thanks.
Here is my current situation.
I am putting up approximately 75 acres of mixed grass hay (mostly tall fescue) on a resort that is right across the road/fence from my place. Ground has some steep hillsides, some small odd shaped patches, some real rough spots, and big gently rolling open fields. I get 2/3 of the hay and am allowed to use the facilities on the resort (swimming pool, tennis, paddle boats, gym, etc.). The resort does not get a lot of traffic and is very open (probably another 75 acres that is mowed with lawn mowers). When it does get busy it is never very crowded because of the open nature.
Right now the owner (or upper management) does not and is not interested in spending any money on inputs (fertilizer, seed, weed control). The owners 1/3 share of the hay is usually trucked (by owner) 2 to 3 hours away to feed to feed to his herd of buffalo or cows, or something. Some years the hay has been sold locally and one year I purchased his share.
The resort manager would like me to make multiple cuttings of the hay just so the whole place looks better. I will only take one cutting per year because the lack of fertilizer and quality of forage make a second cutting not worth it. One year we had a great summer, had good regrowth and I did take a good second cutting, but the first cutting the following year was very poor so I have told the resort manager I will only do one cutting. He understands completely.
I would like to come up with an arrangement that would allow me to fertilize, overseed, or possibly reseed if needed and take multiple cuttings off the ground. Maybe make some small square bales on later cuttings (everything is round baled now). Something in general that would allow me to take better care of the ground, get some more productivity out of it, and provide the owner with some return.
Any comments or ideas would be appreciated. Thanks.
Hay ground lease/share crop options
Here is my current situation.
I am putting up approximately 75 acres of mixed grass hay (mostly tall fescue) on a resort that is right across the road/fence from my place. Ground has some steep hillsides, some small odd shaped patches, some real rough spots, and big gently rolling open fields. I get 2/3 of the hay and am allowed to use the facilities on the resort (swimming pool, tennis, paddle boats, gym, etc.). The resort does not get a lot of traffic and is very open (probably another 75 acres that is mowed with lawn mowers). When it does get busy it is never very crowded because of the open nature.
Right now the owner (or upper management) does not and is not interested in spending any money on inputs (fertilizer, seed, weed control). The owners 1/3 share of the hay is usually trucked (by owner) 2 to 3 hours away to feed to feed to his herd of buffalo or cows, or something. Some years the hay has been sold locally and one year I purchased his share.
The resort manager would like me to make multiple cuttings of the hay just so the whole place looks better. I will only take one cutting per year because the lack of fertilizer and quality of forage make a second cutting not worth it. One year we had a great summer, had good regrowth and I did take a good second cutting, but the first cutting the following year was very poor so I have told the resort manager I will only do one cutting. He understands completely.
I would like to come up with an arrangement that would allow me to fertilize, overseed, or possibly reseed if needed and take multiple cuttings off the ground. Maybe make some small square bales on later cuttings (everything is round baled now). Something in general that would allow me to take better care of the ground, get some more productivity out of it, and provide the owner with some return.
Any comments or ideas would be appreciated. Thanks.
Hay ground lease/share crop options
MF 30b problems
I recently purchased a sitting and rotting 30b skiploader from a widow. knowledge of any prior mechanical problems died with the owner. Two hydraulic arms were missing from the loader, and later found in the garage, disassembled.
I have installed 4 rebuilt cylinders on the loader ($$$), installed a good used tire on the rear so now it rolls, fixed the wiring so it starts with a key (not a screwdriver on the starter solenoid), changed engine oil and filter. new muffler with rain cap.
I checked the transmission fluid it was empty. added 5 gallons of tractor fluid from local TSC. level on dipstick is good.
It has two shifter sticks, and pedals for reverse and forward. It will drive forward and reverse when you press the pedal and wait a few seconds. drive forward, stop. press reverse and wait. Bam, it starts moving. What is the problem here?
Also, the rear gannon only goes up or down when tractor is in motion and does not stay up. might be related.
I have the service manual, but don't know what the problem is in the first place.
Thanks.
I have installed 4 rebuilt cylinders on the loader ($$$), installed a good used tire on the rear so now it rolls, fixed the wiring so it starts with a key (not a screwdriver on the starter solenoid), changed engine oil and filter. new muffler with rain cap.
I checked the transmission fluid it was empty. added 5 gallons of tractor fluid from local TSC. level on dipstick is good.
It has two shifter sticks, and pedals for reverse and forward. It will drive forward and reverse when you press the pedal and wait a few seconds. drive forward, stop. press reverse and wait. Bam, it starts moving. What is the problem here?
Also, the rear gannon only goes up or down when tractor is in motion and does not stay up. might be related.
I have the service manual, but don't know what the problem is in the first place.
Thanks.
MF 30b problems
Hyperion Ki-84 Hayate
Denne fine flyver sælges da jeg aldrig vil få den bygget p.g.a. andre projekter. Krop og vinger lavet i en eller anden form for plast med træspanter indvendigt. Den er rimeligt pænt lavet med nitter og panellinjer. Den er altså aldrig pakket helt ud og alt er altså stadig pakket som den blev leveret. Flyet har elektrisk optrækkelig understel og der er en fin gul alu-spinner med. Du skal selv isætte LiPo, Modtager og ESC.
Jeg har altså ikke ville at pakke den helt ud for at tage billeder. Vil du gerne se med fingrene er du meget velkommen forbi.
Længde: 970 mm
Wingefang: 1140 mm
Flyvevægt: 1,3-1,5 kg.
Derudover er følgende med:
1 stk. Hyperion Atlas HP-DS13TMB digital servo.
4 stk. Hobbyfly D1711 TMB digital servo.
1 stk. APC 10 x 7 E propel.
1 stk. propel adapter.
1 stk. Hyperion HP-GS3014-10 Brushless motor. (Kv 1290 og 134g)
+ 1 stk. Servo-programmering der består af kabel, USB adapter og servo ledning samt Spektrum 2000 mah 4,8V NiMH pakke. Denne til at programmere Hyperion servoen til 180* vandring (nødvendigt til understel). Software kan hentes på nettet.
Hele herligheden kan afhentes for den nette sum af 900 danske kroner. Og til dem som finder det lidt uinteressant at køre helt op til Nordjylland kan lægge fragten oven i som straf for dovenskaben. Den kan overdrages i Brønderslev Modelflyveklub hvis man gerne vil spare 80 km i kørsel.
Så grib knoglen og ring på 60776190.
med venlig hilsen Kent
LÆS: Jeg har kun interesse i kolde kontanter og altså ikke noget bytte. Dette er heller ikke nogen auktion og den samlede pakker er faktisk særdeles rimeligt prissat, så hav lidt respekt for folks annoncer her på forum.
Et par billeder
Jeg har altså ikke ville at pakke den helt ud for at tage billeder. Vil du gerne se med fingrene er du meget velkommen forbi.
Længde: 970 mm
Wingefang: 1140 mm
Flyvevægt: 1,3-1,5 kg.
Derudover er følgende med:
1 stk. Hyperion Atlas HP-DS13TMB digital servo.
4 stk. Hobbyfly D1711 TMB digital servo.
1 stk. APC 10 x 7 E propel.
1 stk. propel adapter.
1 stk. Hyperion HP-GS3014-10 Brushless motor. (Kv 1290 og 134g)
+ 1 stk. Servo-programmering der består af kabel, USB adapter og servo ledning samt Spektrum 2000 mah 4,8V NiMH pakke. Denne til at programmere Hyperion servoen til 180* vandring (nødvendigt til understel). Software kan hentes på nettet.
Hele herligheden kan afhentes for den nette sum af 900 danske kroner. Og til dem som finder det lidt uinteressant at køre helt op til Nordjylland kan lægge fragten oven i som straf for dovenskaben. Den kan overdrages i Brønderslev Modelflyveklub hvis man gerne vil spare 80 km i kørsel.
Så grib knoglen og ring på 60776190.
med venlig hilsen Kent
LÆS: Jeg har kun interesse i kolde kontanter og altså ikke noget bytte. Dette er heller ikke nogen auktion og den samlede pakker er faktisk særdeles rimeligt prissat, så hav lidt respekt for folks annoncer her på forum.
Et par billeder
Hyperion Ki-84 Hayate
Inscription à :
Articles (Atom)
