Roxor Maintenance Videos

Roxor maintenance videos at this site. :) Starts with simple the oil change then how to install additions in other videos . More to come :tiphat:
https://www.youtube.com/watch?v=hezH...TujGFcX7SoDcwB

Roxor Maintenance Videos

Rear main bearing cap cracked

I have a 58 mf65. I have been doing and overhaul on the g176 Continental. I'm in the process of putting it back together and started to put the rope seals in the rear bearing cap. I got one done and while doing the second a piece broke off the journal ( if you will) that the rope goes in on the inner engine side. The top and bottom of it are still intact. Any ideas how to go about fixing? Replacing the cap? I just bought a new crank bearings seals ect. I'm ready to get this thing running again haha. Thanks in advance for any input. I'm new to repairing inner engine parts on something of this nature. Always been more into small engines. I thought about using a silicone or something? Maybe even trying a metal bonding agent to try and reform the the piece around a screw driver or something?

Rear main bearing cap cracked

7300 hours

https://www.youtube.com/watch?v=4LKS...eid=2b4978ce6d

Thanks Messiks:starbucks:

7300 hours

RTV-X1140 Brake Issue?

I could not find anything related to this subject on this group forum so I decided to create a new thread. Note! I'm a newbie on this website, so please advise on any faux pas I may commit.

Two easy checker dash lights recently lit up on my 2016 RTV-X1140. They are in the lower left corner of the easy checker display, one for the headlights, and one for the brakes. What little info I could find says the brake fluid is low, however, it is full and clean. I noticed a sensor connected to the brake fluid cap, so I disconnected it, and checked continuity. It appears to be functioning properly. The brakes and emergency brakes function as they should, as do the head and tail/stop lights. Anyone else have this issue with the dash lights?

Thank you,

ldkubute
2016 Kubota RTV-X1140
2018 Kubota MX5800

RTV-X1140 Brake Issue?

JCB 520 Telehandler Questions

Looking at a JCB 520 at an upcoming auction.  Two of them there actually.  One is nicer with EROPS, and one is rougher with OROPS and transmission issues.  Anyone familiar with the transmissions on these, what fails, and if they are costly to repair.  Seems like it would be a very handy machine.

JCB 520 Telehandler Questions

How to determine RPM?

Anyone with an idea how to determine the RPM? IN other words, without a tachometer how to do it? And how would a tach attach? (RTV-X900)

How to determine RPM?

Twine Troubles

I have a New Holland 311 baler and this past season I was having trouble gettin the small triangle shaped knife to cut the string after it tied a bale, it seems like when the knife arm goes to cut it, it doesn’t make a clean cut and the twine will get caught in the bill hook or those discs, and of course ends up in one side or the other not tying. The best luck I have is out of the cheapest 9000 plastic twine it seem a little smaller, but if I were to put some quality heavier duty string still 9000 but maybe Bridon it won’t hardly cut it at all and will miss basically every bale, and I did replace the knives that cut the twine with little to no noticeable difference, if any of y’all have had any trouble like this I’d appreciate some advice

Twine Troubles