First off, this is only our second year owning a baler. I didn’t grow up doing this so I’m still learning how to operate it. Tried to start baling a few days ago and every time we started it would break the shear bolt on the PTO. Also noticed we were bending bars so I kept changing bars and shear bolts. After fighting it for a day we got out the book and started adjusting on it.
We tightened the apron chain tension, and adjusted the roller chain that drives the big drum on the bottom of the baler. Tried baling again and it actually baled like it should. Made about 4 or 5 good bales then it began breaking shear bolts again. But I noticed it was ‘puking’ hay up front.
The hay builds up in front of the chain to the point I can’t see the bale in the chamber. And once it starts puking hay it will only make a bale about 2 or 3ft in diameter before it shears the bolt. The pickup is always running, I haven’t sheared that bolt but it’s almost like the hay can’t get from the pickup to the chamber. Any help would be appreciated
NH 853
0 commentaires:
Enregistrer un commentaire