Traxxas stampede vxl opgraderet helt ny

Fik denne ind i en handel men jeg får den ikke brugt så her er chancen for at få en stampede vxl med komplet rpm ophæng, rpm støddæmpertårne,rpm karroseriholdere,rpm bumper,alu støddæmpere,proline desperado fælge med badlands dæk,proline boble karroseri,bilen er ombygget med lang slash chassi farvet sort med rit dye ,center trækaksel med cover,støre batteriholder osv.

Bilen kommer i original kasse og er selfølgelig med traxxas 2.4ghz tqi fjernstyring ,alle papirer samt kvitering fra 28/8-2014 hvor den er købt,ifølge Kristian jeg har bilen fra har han givet over 5000 for den,der medfølger også diverse original dele fra ombygningen ink original batteri og lader,de originale klistermærker medfølger også så køber kan dekorere bilen efter eget ønske,jeg har desuden købt en 3 cellet lipo på 6400 mah for at få lidt mere fart i bilen,men igen jeg får den ikke brugt så alt er sprit nyt har aldrig kørt eller været startet.

Der er bil for over 5500 så jeg håber den kan indbringe 4000 ?

Gerne bytte med el og benzin modelfly både store og små, 2.4ghz fly fjernstyring,kraftig lader osv.

Kan kontaktes på 30306833

Traxxas stampede vxl opgraderet helt ny

ønskes-cc ice eller edge 160a hv

hejsa

er der en eller anden som har en cc ice eller edge 160a hv esc som

jeg kan købe for en fornuftig pris.

så ring eller pm.

tlf. 50546576

mvh

ønskes-cc ice eller edge 160a hv

EME 35 bensin

Hej.

En af mine flyve kolegaer har købt en EME 35 bensin motor,vi har fået den startet den kører gott når den er kommet i gang både low og high omdr,men

når man skal starte den igen (kold) er den ikke nem,det virker som den har det tunkt med at få bensin frem, er det en ide at montere en oneway ventil på tilførslen,jeg vil bare spørge om det er nogen der kender til disse motorer. :)

EME 35 bensin

Ford 6610 cab problem

I have a 1984 6610 with a bubble cab. I would like to fit a new radio but I am having difficulties in removing the cover which incorperates the windscreen wiper, fan and temperature switches/knobs. The wiper and temp switches pull off easily but I cannot budge the fan switch, which is chrome rather than plastic. Does anyone know how I can get it off so I can remove the cover ?

Ford 6610 cab problem

KØBES:Phantom vision 2 plus

Jeg søger en phantom vision 2 plus.Det skal være den nye model med den nye type sender.Den der har lipo og indikator for batteri på sender.

KØBES:Phantom vision 2 plus

Hvid Solartex.

Nogen der har noget liggende de vil sælge?

Hvid Solartex.

Sælger Futaba 14SG + 2stk. R7008SB

Hej,



sælger 1 næsten ny Futaba 14 SG med 2 stk Futaba R7008SB SBUS2 modtager.

Nypris:4890

Nu kun: 4000 el kom med bud per mail.

Sælger Futaba 14SG + 2stk. R7008SB

KØBES Art Hobby Thermic 2.5M

Jeg er meget interesseret i ovenstående model brugt i god stand, da jeg ikke har tid til at bygge.



Har du en der samler støv, så køber jeg gerne :)

KØBES Art Hobby Thermic 2.5M

Mega 22/30/3 E

Hvad står E for, er det "kun" Omdr/Volt der er forskellen ?

Kan man bruge en 70 Amp (bec) Turnigy controller til denne motor (12x8 mølle) ?

Er aero-naut cam-carbon propeller sikker nok til hotlinere ?



Mvh.

Mega 22/30/3 E

Stiga park

Super fin knækstyret traktor med stort klippebord...



http://www.dba.dk/havetraktor-stigs-...id-1012052801/

Stiga park

New Holland 460 baler / crop cutter

We are looking to get a new baler and change our operation a bit. We currently have a BR780A that i have spent too much on but still wanting to go red. I have been researching the new NH models and im very impressed with the new pick up design but cant figure out with model to go with. The BR780A makes a good bale for my own use but no one wants to buy 5x6, so im looking at a 4x6 and 4x5. Im thinking the baleslice would be great for silage but its not an option on the 460, only cropcutter is available. Has anyone had any experience with the cropcutter option? Can you turn it on/off? Ive asked my dealer but he doesnt have a clue. Any advise would be greatly appreciated!



New Holland 460 baler / crop cutter

Lille Quad med autopilot

Halløj :)

Jeg mangler en lille indendørs quad (julegave til barn) der har fuld autopilot, så man kan lægge senderen fra sig og skubbe til quad'en, uden den bliver sur. Synes jeg har set nogle på nettet, men jeg kan så ikke finde dem nu :)

Er den lille Hubsan X4 så stabil?

Og hvad med Hubsan FPV-udgaven, har I prøvet af flyve indoor FPV den?

Lille Quad med autopilot

Can I plant orchard grass with this brillion seeder?

I am looking at buying the brillion seeder below in the pics. Where I live no one uses them so i don't know much about them. I will have to travel 7 hours to get it. It is 8' wide with hydraulics..... I noticed it only has one seed box. Will it plant orchard grass we'll since it just has the small box or do I need one with the larger box? If it will how many lbs you think it will hold at a time?

Attached Thumbnails

• 


• 

Can I plant orchard grass with this brillion seeder?

Hyperion EOS 0606i DC input Lader

købes

Hyperion EOS 0606i DC input Lader

hobbyking eu side

hejsa

jeg kan ikke komme ind på hk eu side

er det bare mig eller va??

mvh

hobbyking eu side

Winter Cover Crop Question

I read where folks plant winter wheat, rye or other winter cover crops on a cornfield, but what about a hay field?



Is there some annual cover crop you can plant over your ungrazed hayfield that can be mowed and baled successfully in the spring that requires no tillage? Is this something that is done with a hayfield?



Thanks,

Bill



Winter Cover Crop Question

# of Bales a Cutting

So I was talking to my grandfather about how many bales you can yield per a cutting. He told me that the average is 12 bales a cutting per an acre. Then, he said that you can get 7 cuttings a year. Is this correct?



# of Bales a Cutting

How old is the planter or seeder you're using?

Doing some research. There have been a lot of changes in planters/seeders for more accurate planting depths. Have you updated your equipment?

How old is the planter or seeder you're using?

Do you use the alfalfa varieties leaflet?

Do you use the alfalfa varieties leaflet put out by NAFA to make decisions on alfalfa varieties you might plant?

Do you use the alfalfa varieties leaflet?

Avonds F-104 Bygge video

Total fed bygge video.....sådan skal det gøres :)



http://ift.tt/1tqKmsE

Avonds F-104 Bygge video

blad størrelse trex 500 clon

Har en trex 500 clon der har et par main blade der er gået i splinter selvfølgelig inden jeg nåede at måle længden!

Hva længde vil i anbefale til en begynder kan se der er lidt at vælge imellem.

blad størrelse trex 500 clon

Transport fra Risskov v. Århus til Sj. Odde

Robbe Twin air ca. 160 spænd Er der en der kan tage den med til Sjælland med Odden færgen så giv mig lige besked tak .

Der er selvfølgelig en LILLE erkendtlighed :D for uligheden.

Transport fra Risskov v. Århus til Sj. Odde

DJI Phantom 2 - OPDATERET

Min nye DJI Phantom 2 - OPDATERET vil ikke starte op efter at jeg har være inde på DJI Phantom 2 Vision Assistant og på DJI RC System Assistant.



Jeg har kalibreret.



LED Flight Indicators melder ikke fejl. LED blinker enten grøn eller gul. Jeg tror ikke at det er en fejl 40.

DJI Phantom 2 - OPDATERET

Schulze next 6,30-5 lader

Hejsa.

Kan man sætte en begrænsning på Max Volt, når man lader Lipo celler.

Det kunne være rart, hvis man ikke vil toppe helt op, er ligeglad med de sidste % vil hellere have et batterri med lang levetid.



Mvh.

Schulze next 6,30-5 lader

Walkera Scott x4

Jeg har en Phantom 1 som jeg har været meget glad for, men nu overvejer jeg at købe noget lidt nyere og dermed lidt mere kraft, jeg har tænkt på walkera Scout x4 er der nogle som har erfaring med denne, hvis der i Jylland er en som flyver med denne vil det være super fint

Tak

Juhlt

Walkera Scott x4

Pay taxes or buy some new equipment

Just wondering if any of you get told to buy something new to depreciate or pay more in taxes by your accountants. This is a delema I'm finding myself in. I really don't need anything and I don't like to get in anymore debt. Just wondering what some of your thoughts are.



Pay taxes or buy some new equipment

GPS parallel forbindelse

Som novice udi FPV, har jeg et spørgsmål vedrørende GPS forbindelse.

Jeg har en 250 quad med en cc3d controler og et OSD modul med GPS

Spørgsmåler er så om man kan føde både cc3d controlleren og OSD med det samme GPS signal, eller der skal 2 GPS enheder til

GPS parallel forbindelse

V4210 complete cabs only $1200

Wow,Reg. $5100 what a great deal, pm me for more details.

V4210 complete cabs only $1200

ADVARSEL om VDV Modellbau

Lad være at bestille noget hos VDV Modellbau www.rc-xxl.com og http://ift.tt/1uMMqM1

samt hos Jet World www.jet-world.de



Firmaerne er ejet af Jürgen Van der Velde, og han har tilsyneladende "trukket stikket", for det er umuligt at komme i kantakt med ham og firmaerne. Svarer ikke på e-mails eller henvendelser via kontaktformular på siderne og hans telefon numrer eksisterer ikke længere.

Hans web shops er stadig aktive og man kan bestille og betale, men man modtager ingen varer!!



Har haft kontakt til en af hans leverandører, og de kan heller ikke komme i kontakt med ham.



Så er I advaret!!!

ADVARSEL om VDV Modellbau

batteri dji phantom 2

hej er der nogen der evt har haft held med at skille et batteri ad og erstatte med nye celler i stedet for at købe et helt nyt til en tusse :eek: mvh jørn

batteri dji phantom 2

futaba megatech t 3pk MODTAGER købes

det skal være 2,4 MHz :) mvh Jørn tlf 31 66 84 31

futaba megatech t 3pk MODTAGER købes

Seeding orchard grass in the winter

I live in TN so our ground doesn't freeze for long periods.... Will it hurt to seed new stand orchard grass in December? I know the seed isn't going to germinate until spring, but didn't know if it will harm the seed until it does warm up in the spring? It would really help me since I will be busy planting other crops in the spring.... plus I thought I wouldn't lose as much soil moisture from working the ground now as I will in the spring.



If it wouldn't hurt it, would you apply any fertilizer now or wait till after it has grown some? Thanks sorry I am new with orchard grass.



Seeding orchard grass in the winter

Happy Thanksgiving

To all my RTV Forum friends, Happy Thanksgiving. May the day be filled with reflection and time with families and friends. We have so much to be thankful for. May God bless you and our great country.

Happy Thanksgiving

Hay feeder

Has anyone had any experience with the "gobob" hay feeder



Hay feeder

Tractor size for 1044 wagon?

Wondering what size tractor people have run a 1044 stackwagon with? The book says 60hp minimum, and I am assuming that is just for the weight. I have been running mine with my 4020, and am looking at freeing up the 4020, because it runs the mower and rake as well. I have a super W6 that came with the farm, and I am thinking about getting it running and trying it. It is weighted up almost as heavy as the 4020, and my ground is very flat so I think being a bit light on power would be tolerable. Thoughts?



Tractor size for 1044 wagon?

Is anybody looking for a pre “X” model cab?

I have found a source for Kubota factory cabs (V4210) at a rock bottom price. I purchased one for myself for my rig.



I have no affiliation with the seller and do not want to run afoul of the board rules so PM me if you want to know more.



I only post this info to help those on the board who may be looking for a cab.

Is anybody looking for a pre “X” model cab?

kuldegysning

ved ikke om den har været her før men så kan det ses igen :D

http://ift.tt/1tu4iem

micu:)

kuldegysning

SPEKTRUM dx18

SPEKTRUM DS 18 2år gammel er velholdt total drifttid 89 timer sælges med 6 kanals modtager orginal tilbehør og allu kuffert til 2 sendere ikke orginal 2000kr VP 21972183

SPEKTRUM dx18

Vis os dit fedeste fly :-)

Det vildeste, største, bedste, eller simpelthen bare dit ynglings fly.

Og nu ikke så meget andet negativt støj.

Alle fly har berettigelse, i denne tråd. Det vigtigeste, er at det gir smil på læben :-)

På forhånd tak :-)

Vis os dit fedeste fly :-)

DX6i Købes

Jeg vil gerne købe en Spectrum Dx6i sender, men til en rimelig pris, og selvfølgelig skal den være i orden.

DX6i Købes

Asphalt Pad for Working Facility?

A friend's family company has won the contract to resurface the county road in front of our house. He told us we could have all the millings we wanted, delivered.

I am going to pave some areas around the farm. I told my son I was thinking about taking down our large handling area and paving the surface. It gets muddy in the winter months.

My son believes an asphalt pad may get too hot during the summer months. He is concerned that cattle standing on asphalt may get hot feet.

There are times we need to keep a cow or calf penned and they would have to lie down on the pavement. We also use the pen to fence wean calves.

My solution is to provide an area where a penned cow can have access to dirt or bedding. Even thought about putting a thin layer of dirt or river sand on top of the pavement.

My thinking is the pen will be easier to clean with the BobCat with a fairly solid base.

Any thoughts on whether my idea is flawed?

Asphalt Pad for Working Facility?

Lange svartider på sitet

Svartiderne er i dette øjeblik nærmest elendige på sitet.

Én gang timede det out, mere end 30 sekunder for en skifte :eek:



Og ja har testet andre sites. Kører med en 60/60 fiber og uden problemer.

Lange svartider på sitet

KØBES= Alu rør 18mm

Jeg søger et alu rør med 18mm udv. diameter. Længde ca. 1 meter.



Nogen der har sådan en stump jeg kan købe?

Eller nogen der ved hvor man kan købe det?

KØBES= Alu rør 18mm

Align motor

Align RCM 650L sælges 300kr har været til service hos align er faktisk ny 21972183

Align motor

Ny hjemmeside - Modelflyvning for Dummies

Vi er ved at lave ny hjemmeside. Formålet er at skabe interesse for modelflyvning og på den måde få flere medlemmer i klubben. Hjemmesiden kunne kaldes: "Modelflyvning for Dummies".



Hjemmesiden er endnu ikke gået "WorldWide" og kan indtil videre findes på adressen http://ift.tt/1ybCmlu



Siden vil senere kunne findes på www.rmfk.dk



Kommentarer modtages med glæde.



Kenneth Rafn

for Randers Modelflyveklub

Ny hjemmeside - Modelflyvning for Dummies

Powerbox/on off

Bruger i 1 eller 2 modtageraccuer ?

Bruger i powerbox ?

Med andre ord hvad burger i af udstyr i jeres elmodeller ?



Jesper

Powerbox/on off

Type Hydraulic Fluid for 6500

About time for first change. What type that Tractor Supply sells will work? I will spend the money for mahindra if I have to but its expensive compared to what Tractor Supply sells.

Type Hydraulic Fluid for 6500

F5 tiger med DS-215 EDF Schübeler

Seriøs F5 og DS-215-Fan

Følg tråden hvis I har lyst !

Kan du/I ikke forstå Tysk, så oversætter jeg gerne enkelte stykker !

meen billeder siger jo 90% ikk:)



http://ift.tt/15jaotJ

F5 tiger med DS-215 EDF Schübeler

24-11-14, DRK 20:54 Shady Lady

Udsendelse om 2 verdens krigs længste bombetogt.

B24 Liberator.



Ruben

24-11-14, DRK 20:54 Shady Lady

Ford 5000 power steering overhaul

Hi

I have had a leak in my power steering for years now

I would really like to fix it now. The pump has been empty for years because of the leak. It used to leak on our feet when we were cutting the grass. Got worse once it got hotter.

Its the one with the power steering box and not the pistons things.

Does anyone know if this project could be tackled by someone who could just service the tractor -> oil and filters change.

Ive never overhaulled a steering box before

I found out the seals only cost R150 but to get someone to do it will cost much more

Thanks

Ford 5000 power steering overhaul

Fpv

Hejsa.

Er der nogen der kan fortælle mig hvor der bliver fløjet fpv i storkøbenhavn ?(gerne nær Brøndby)

Fpv

turnigy c5065 350 prop adapter

Hej , er der en der ved hvor jeg kan købe sådan en med 4 huller , ikke klemme system ?



Henrik

turnigy c5065 350 prop adapter

Helikopter og fly + dele

Fjernstyret fly og helikoptere RC, Fjernstyret fly robust udført i skum, klar til at sende i luften. To helikoptere den ene er Align T-Rex 450 V2 den anden er en clon, der er reservedele så den ene kan gøre klar til flyvning. Radiosender er en 6 kanals og kan derfor bruges til både lfy og helikopter.

Derudover er der masser af udstyr, det meste er nyt. Der er bl.a. servoer, fartregulatorer, propeller, hjul, samt mange batterier og digital lader. Dertil kommer et par mere eller mindre færdiggjorte projekter





Se billeder her:



http://ift.tt/1r0kQAg



Jeg vil helst hvis det kan sælges samlet.

Helikopter og fly + dele

twin astir

spørgsmål og forslag ,angående twin astir og anbringelse af hovedhjul.

den skal ha moter i ryggen. har printet trepunktsplan på 1/1 ud og der sidder hovedhjulet lige under vingerør eller i tyngdepunkt, da den får næsehjul også dette er så ren svæver, er det så godtnok når nu den får klapmoter i ryggen, eller skal jeg rygge hovedhjul fremad, jeg er lidt i tvivl, jeg personlig vil sige det er ok med hovedhjul over tyngdepunkt/vingerør da det osse giver mulighed for forstærkning af hjul op til vingerøret i kroppen, men vil gene ha indput fra andre

micu:)

twin astir

Købes E-Flite Celectra-4

Hey



Er der nogle af Jer der har sådan en E-Flite Celectra-4 de gerne vil sælge?



Skal klart nok virke 100%



Info her:



http://ift.tt/1peceVq

Købes E-Flite Celectra-4

Rut Roh Rorge.. - Engine Tick / Knock

Hi Everyone!!



I've been lurking in the guest shadows for some time while researching the RTVs before I bought one. I picked up a nice shape 04 RTV900 Worksite Camo with dump bed and steel roof with 400hrs. It needs a few things here and there, CV boot, probably some of peanuts stick stoppers, long term the new rear to front driveshaft.

After I picked it up, I dropped at the local dealer to have it gone through and serviced. All fluids, suspensions checks, etc. They made a similar list, however they noted a slight engine tick. After poking around at a few more RTV900s, i noticed the difference too.

I looked at the valve lash and they were darn close to spec (.008" cold) and the dealer said they tried cracking the injector nuts to see if it's a bad injector. I'm going to retrace those steps tomorrow to ensure all is well on the top. The tick/knock doesn't sound substantial, but then again, I'm not well versed in diesel ownership. Is there anything else I should be checking for before I pop the head off this thing and start to investigate the lower half?



Thanks in advance everyone!! Glad to be here

nah2323



Oh yeah, one of these made it on my flatdeck trailer on the way home from the dealer too..\/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/ \/

Attached Images

RTV Boss.jpg (72.2 KB)

Rut Roh Rorge.. - Engine Tick / Knock

utrolig billig mini bor/slibemaskine

utrolig billig mini bore/slibemaskine:D

http://ift.tt/1vfIg4i

micu:)

utrolig billig mini bor/slibemaskine

Video/OSD/autopilot's telemetry stream

Jeg har set på Video/OSD System Kit, men ved ikke om f.eks. Hobbyking har et system der kan det samme til en lavere pris.



Jeg vil have streamet video, autopilot's telemetry stream hvis muligt også mission planning into real time. Flighcontroller bliver Pixhawk.



Hvad anbefaler I at købe?

Video/OSD/autopilot's telemetry stream

Futaba 14 sg gaskurve

Hej har et problem med at gaskurverne i normal og hold mode følges ad og ikke kan justeres hver for sig. Kurverne mellem normal og idle 1 og 2 er separate men som sagt følges hold og normal kurverne ad.Nogen der har en løsning på det?

Futaba 14 sg gaskurve

Sælges: Graupner MC-Ultra Duo Profi

Hej,



jeg sælger en Graupner oplader model MC-Ultra Duo Profi. Det er en pålidelig oplader. Tysk bygget kvalitet. Sodtware opgradering til version 8 eller højere vil gøre det muligt for Lipo batterier osv, men den skal sendes til fabrikken eller en forhandler for opgradering.



Hvis LiPo er nødvendigt har jeg en Shulze ISL 530D Chamäleon til salg her.



Billeder kan ses her på dba.dk.



Pris: 200 kr.



Nuværende version er V6.42

Opladnings- og afladningsprogrammer for Ni- Cd, NiMH , bly-syre og bly-gel batterier. Kan oplade NiCd-batterier med 1 - 3 celler. Variabel ladningsterminering , 3 indstillinger. Oplad op til 5,5 A. 3EL batterivedligeholdelseprogram. Justerbar lavspænding cut-out sparer på energien, som drages fra et bilbatteri.

Sælges: Graupner MC-Ultra Duo Profi

Langvarig sag om droneflyvning i USA er afgjort

Det skete i de dage i 2011, at en fotograf fløj med sin drone på et universitetsområde i Virginia.

Det mente FAA at han skulle have en bøde på 10.000$ for.



Forskellige myndigheder har siden diskuteret om FAA overhovedet havde belæg for at give bøden.

Det er så omsider blevet afgjort, at det havde de. Av for en lussing.



http://ift.tt/1uX7vqG

Langvarig sag om droneflyvning i USA er afgjort

Trex 450 SE V2 komplet sæt

Hej, grundet at jeg ikke for fløjet nok med min helikopter er den nu til salg

se evt. http://ift.tt/1zbtElq

Sættet er komplet og er klar til at flyve.

I er velkommen til at kontakte mig på 26124895

forum rabat gives :)

Mvh. Magnus

Trex 450 SE V2 komplet sæt

Start af Roto 35v motor. Hjælp

Hej med jer.

Jeg søger lidt sparring ifht. Opstart af nyerhvervet men brugt benzinmotor/model.

Motor- Roto 35v

Jeg har et fuldt opladet NiMH bat 5.8 v på tænding. Fuld tank med Aspen 2% olie blanding.

#Har forsøgt at "slå" den igang med de bare næver, men uden held.



Har i ide om at den skal startes med start motor eller andre tricks?



Bh

Musvitten.

Start af Roto 35v motor. Hjælp

X1100 difficulty shifting transmission

These hydrostatic transmissions are known for difficulty getting the transmission out of gear and into neutral. The new "X" series, has an "unloader" feature, activated by the brake which is to serve the function of unloading the pressure in the hydrostat so the shift lever can be moved.

On my 2014 X1100, this new feature doesn't seem to do the job it is intended to accomplish. Anybody else out there with the new model that is having better success than I am?

I bought the unit to plow snow with, and if we can't get the shifting to be a little quicker and easier, I'm afraid this unit is going to be a dud in that application. I've taken it back to the dealer, but they haven't been able to help - probably don't know what to do.

I know if you wait long enough, the pressure will unload to enable shift change, but that isn't practical or safe, especially when in plowing snow you are constantly reversing direction in tight quarters.

If anyone is planning to plow snow, I'd research this problem before buying one. Any ideas out there????

X1100 difficulty shifting transmission

stenslibemaskiner til salg

Hejsa.



Har to stenslibemaskiner til salg :



Se http://ift.tt/1vKjvcs







VH Bruno

stenslibemaskiner til salg

Tank.

Mangler en tank til benzin. Skal ha mål som en Borup 1/2 liter grøn dunk, men længere så den kan indholde 700 - 1000ml.

Evt. Nogle link til nye.

Tank.

Qu4d sælges...

Qu4d med apm 2.5, telemetri til computeren eller tablet med live data, fpv sender 250mw, 8kanals spektrum modtager... Tarot gimbal og 4lipo batterier... Flyvetid 15-17min



Sættet ikke brugt særlig meget...





6999kr

Qu4d sælges...

New X1100 Hour Meter Revision

We've got a 2014 X1100 and would like to revise the wiring on the hour meter to show actual run time instead of "switch-on" time. Had a snow plow installed by the dealer he put 5 hours on the hourmeter with the key switch on. The new X1100 series has an instrument cluster in the "dash". I assume one would need to get behind that instrument cluster in order to rewire the hourmeter. Question is: has anyone taken the dash apart on the new X1100 series? Do we have to remove the whole "dash" to get at the cluster? I began to explore what's involved in getting into the "dash" and gave up after realizing the steering wheel would have to come off and that looks like a challenge without chewing up the plastic steering wheel. Anybody got any ideas or advice?

New X1100 Hour Meter Revision

3D printer sælges prusa i3

Printeren, strømforsyning 450w og filament plus lidt begynder support fra mig medfølger

4900kr

3D printer sælges prusa i3

navn på gammel rc butik

hejsa

er der nogen der kan huske hvad navnet på den rc butik som lå lige

efter valby bakke på roskildevej

mvh

navn på gammel rc butik

transformer

http://ift.tt/1qIYmnf

transformer

chase 360

nogen der kan foreslå bedre plastik link til chase 360...dem der medfølger kit er sku lidt for løse?

chase 360

søger propeller 3D 13/4 og 18/4

Hej jeg har fået fat i et par 3D fly og mangler derfor propeller i 13/4 og 18/4 bredbladet

Pris snakker vi om :D

søger propeller 3D 13/4 og 18/4

Robbe Twinair til afhentningspris

Hej,



Jeg har en pænt brugt Twinair til salg, som trænger til udskiftning af servoer på flapsene og ellers bare skal have limet højre understelsben i vinge efter en "sidevinds" landing. Har aldrig været udsat for styrt.

Har gang i for mange projekter og tiden er knap, og du får her en rigtig fin flyver som er en vellykket kopi af en "Duke":)



Fast pris ved afhentning kr. 700.-

Ingen forsendelse.



http://ift.tt/1Atxb2P

Robbe Twinair til afhentningspris

væv på højderor

skal ha lagt væv på et højderor, hvad bruges der til at ligge over vævet da jeg skal ha lagt den i pres ,har læst noget om mylar men kan andet bruges

micu:)

væv på højderor

Cheap windshield- Bordercollie style

O.K. RTV family, I finally made a prototype cheap windshield and it is really working well. :) I just decided to make an upper and lower frame because I have so much stuff in the way . While a real window would be nice, I always run low on mula near the end of the month and have a lot of house repairs to get done in Ark so I am really happy with this set up. and the great thing about it, anyone with even just a hack saw ,a drill, a bit and some wood screws, add some glue and you are done after a trip to the furring strips at Lowe's. The window , with film prorated, not including clamps , cost me about 2$ Yea $2 . :) And I was just marveling at it as I drove in that blustery wind. Later maybe I will get a few pieces of plexiglass at a reasonable cost for the small size in the "4 panes" but for now.. Thank you Lord for this cheap window !

What I did was-



1 find some narrow and straight pine boards (1 " wide or so)in my stash of packrat stuff . 2. Cut the right length and make sure there were no knotholes.decided to add a center support..

3. Cut the sides and using my biscuit machine ( left over from my years repairing antiques) squared everything up and glued them together

4 painted

5 applied the cheap window film and heated it and also added a trim board to help secure the film but had run out of paint so you will notice in the picture, there is no paint on it..

5. after everything was ready and dry, was going to use the dj clamps (that zoom recommended to me years ago for mounting my console) but ..found temporally , the light brackets hold it fine till I can get 2 more of the clamps.

The picture of the bottom section didn't come out so I will try later on it. I think I will do some mods on the lower section anyway because I don't have a center support for it and it developed more slack from the wind today but is still doing ok. I think I will probably make the top panel the bottom panel and use the wider section at the top to improve vision. Being short, I can't slouch down with the bottom board base where it is. ;) .I will say that the film isn't quite as clear as "nothing" but it is working just fine for me. Also don't know how it would work with snow but for the south , I am pleased as punch. :)

bordercollie



edit to say that I didn't want to apply the window film directly to my roll bar but that can be done. I want it so I can remove it real fast so as of now I just yank the sections on or off. . :)

Attached Images

	1114141417.jpg (71.8 KB)
	1116141429.jpg (56.6 KB)
	1118141129.jpg (61.6 KB)
	1115141757.jpg (43.7 KB)

Cheap windshield- Bordercollie style

Drone TV

Droner (ikke multirotorer) på DR2 kl 2300 :cool:

Drone TV

Sælges: Sony CCD fpv cam.

Købt af en kammerat for noget tid siden, så jeg har desværre ingen info på det. Andet end det kostede 900,- fra nyt for et års tid siden. Det kan ikke filme i mørke, men i dagslys er det virkelig godt.

Den ene servo er defekt.



Sælges for 200,- inkl. fragt.



Kontakt mig på pm eller 22 88 80 33

Sælges: Sony CCD fpv cam.

Hydraulic issue 4530 with loader

I have a 4530 with FEL and I recently added rear auxallaty ports from a donor tractor. Installed and now the system is faulty. But not sure to what. It's like some line is not returning or the pump is not working. There is a 2" or so rubber hose on passenger side that feeds to the back of the pump. It is sucking down like sucking air and penching semi closed. The lines have been checked and nothing looks to be mounted in the wrong spot.

Hydraulic issue 4530 with loader

Ford 4630

Hi,

I have a Ford 4630, 2wd tractor.

My problem is that the brake on the lefthand side is working roperly but the one on the right hand side needs some adjustment. How do I do this?

Thanks, Will.

Ford 4630

Wind guards on wheel rakes

Would like to here some pros and cons for wind guards on wheel rakes.



In my area, none of the rakes have them.



How much do they add to prices?



Thanks for any responses.



Wind guards on wheel rakes

Flyveplads omkring Brøndby eller kort over steder?

Hej



Jeg er ny her både inden for denne hobby og i forummet. Jeg har kigget lidt omkring herinde og kan umiddelbart ikke finde et kort over flyvepladser i DK, måske skyldes det at det simpelthen ikke findes men er der så nogen der ved om der findes en flyveplads/sted omkring brøndby eller storkøbenhavn?



Pft.

Matthieu

Flyveplads omkring Brøndby eller kort over steder?

new holland 275

I recently got a new holland 275 for a steal!! Guy said he used it last year. Machine cycles good. Just concerned about compacity. Anyone ever own one. Good / bad points. Common problems?



new holland 275

535 vs 567

I am adding a round baler to my line up this winter. I am wondering if I am better off with resale and ease of use buying a 567. The 535 with with net is about 5000 less and of course I'm not a hundred percent sure of bales on the thing



535 vs 567

TBS Gemini, lille anmeldelse + video

Fik TBS Gemini FPV racer med på sin første tur ved den lokale IKEA i Århus.



Gemini har et unikt design, og flyver fantastisk!. Jeg elsker designet, tiltet motorer, den integrerede ESC osv.



Det eneste jeg har ændret i FC er at jeg har slået RATE mode med YAW axislock til.

Den flyver okay i Rate, jeg skal bare lige ha lidt højere rate på så det passer med hvad jeg er vant til.



Gemini er en FPV Racer, men ikke til lowpass proximity race, ligesom de fleste andre minis, du bør nok ikke tage den med til dit lokale parkering hus eller skov.

Jeg lover dig, hvis du crasher den, så kan du samle den op i stumper!



Gemini er nok mere til hastighed i et åbent område, hvor chancerne for crash er minimal, så hvis du forsøger at flyve den, som om det var en BEE :), så er det din egen skyld, hvis du smadre det i 1000 stykker :)

TBS Gemini, lille anmeldelse + video

Dhl

Brug DHL hvis du vil have dine ting hurtigt og "sikkert" frem



http://ift.tt/1yOCjtU

Dhl

Buy elegant bed sheets from online stores

Let’s ask this question to the homemakers – what all would you give importance to when it comes to decorating your bedroom? I am sure the answer that every homemaker gives would definitely include those elegant bed sheets. Attractive and colourful bed sheets definitely add to the beauty and positive mood of your bed room. Isn't that right?



Did you ever know that attractive bed sheets can be bought from the online stores also? Many people think that if you buy bed sheets online, the rates will not fall within your budget. But this is not true. Connect to your internet now and go to the online stores out there. You would see that the prices of the bed sheets there are not so high or exorbitant. They would not cost you dear. So, if the rates fall well within your budget, why should you go for any other options to buy the bed sheets? The only extra charges that you might have to pay would be shipping charges, if any. But do not worry. Such shipping charges would be very minimal. So next time when you buy bed sheets for your home, choose to buy them online rather than going out to the shops and making a frantic search for the bed sheets.



You would find that on these online stores, there would be a wide variety of collections of the bed sheets available for purchase when compared to that available in the shops near you. Floral prints, colourful ones, elegant white or black – you can choose whichever suits your likes!

Buy elegant bed sheets from online stores

Prof firma til lipo søges

Hej jeg bruge lipo batterier eller er der noget der er bedere.



Der skal bruges 12 og 24 volt (laver en kontakt til omskiftning af 12 /24V)



skal kunne bruges som start batteri (stor strøm, og levere en konstant strøm til forbrug.

Nogen der kender et firma der kan levere batterier (til Prof brug).

har ikke så meget plads så det skal nok være muligt at lave dem efter behov.

Hvis de kun sælger igennem firma er det ikke et problem.



Mvh



Henrik

Prof firma til lipo søges

tegninger til Jas-39 Gripen

hejsa



er der en der ved hvor man kan finde tegninger eller byggesæt eller tegninger til en jas-39 .

den må meget gerne ligne originalen, og i en størrelse man også kan se fra jorden :-) 1:6-1:8



MVH Flemming

tegninger til Jas-39 Gripen

El-svæver.

Ovenstående købes. Gerne en Thermik XL fra Valenta.

Ønskedata: Spv. ca. 4M servoer monteret. Uden drivline.



Hilsen hjhj



2398 9352



Skriv hvad du har, samt prisforlangende.

El-svæver.

SÆLGES: 47A 575Watt PSU'er

Hej alle sammen.



Jeg har fået nogle PSU'er i overskud.

DPS-600PB B 47A 575watt



300kr stk, befinder sig i Aarhus, men kan sendes.



Perfekt til opladning af LiPo'er, de skal bare moddes, hvilket er super nemt!

(jeg kan modde dem for 40kr ekstra)

SÆLGES: 47A 575Watt PSU'er

Onedriv - Link - Delt mappe.

Test:



Mappevisning:



http://ift.tt/Negd2q



Enkelte billede:



http://ift.tt/WVwxum



http://ift.tt/WVwxum

Onedriv - Link - Delt mappe.

Kan den bruges?

Jeg er ved at bygge et fly på ca. 9 kg og vingefang på 230 cm. Der anbefales motor 30 - 62 ccm. Vil en 38 ccm 4 takt kunne bruges eller skal jeg gå efter 2 takt i samme størrelse?:confused:

Kan den bruges?

Best pocket gopher contol

I'm sure this has been discussed before. I don't like plowing poison into my nice stands of hay. Don't have time to trap. I've seen the carbon monoxide poisoner, haven't tried one. What works for those of you that have gopher problems? Gopher mounds wear out my equipment far fast than just putting up hay. Any thoughts would be deeply appreciated.



Best pocket gopher contol

Upload af billeder fra lokaldrev?

Er der nogle af jer som ved, hvordan man i sit indlæg upload'er billeder fra ens lokaldrev? Jeg er noget træt af, at skulle gemme dem hos fx postimage.org så jeg kan få et http-link. Jeg har prøvet med MIME-typen 'file' a la file://sti/til/min/billedfil men det accepteres ikke.



På rc-network.de - også vBulletin board-software - giver et tryk på "upload billede"-knappen en popup-menu, hvor man kan browse sit lokaldrev mhp en filsti (så det må også kunne lade sig gøre her).

Upload af billeder fra lokaldrev?

NYT Lydmodul til fly sælges

Denne model:

http://ift.tt/1BKf1eJ



V3 -A dog uden lipo.

Inclusive fragt, told, moms mm 1000.-.



Sælges for 600.- incl fragt.

Prisen er fast, ingen bud eller bytteinteresse.



Lyde installeret; Merlin, Allison, Lycoming, and Diamler Benz



Har aldrig været installeret, da flyet blev solgt inden.



PM ved interesse.



Vh Tonny

NYT Lydmodul til fly sælges

4 takter benzin eller metanol motor 30 ccm

Er der nogen som har en motor liggende enten saito 4 takter eller benzinmotor til en Great planes Stiermann som har et vingefang på 1800 mm dobbeltdækker. Men mener. At den skal have en 30 ccm for at flyvefart nok m.m.

4 takter benzin eller metanol motor 30 ccm

V22 osprey scale kit til salg

V22 OSPREY SCALE KIT mit Einziehfahrwerk

V22 OSPREY SCALE KIT mit Einziehfahrwerk von ROTORMAST / Lindinger.das Modell ist komplett und flugfertig!Mit dabei sind alle Unterlagen, wie Aufbau / Programier/ Bedienungsanleitung.Das Modell wurde zusätzlich mit einem elektrischen Einziehfahrwerk und Beleuchtung ausgestattet.

Hauptrotordurchmesser: 645 mm,Höhe: Heli 320mm/Flugzeug 180mm,Länge: 980 mm,3x Robbe 401 Kreisel.CFK-Rotorblätter 2x Motoren: HK-2221 10-TURN 3000KV BL MOTOR,4x Servos HS 5085MG DIGITAL UNI SERVO,EINZIEHFAHRWERK V22 OSPREY Reichhaltige Ersatz- und Zubehörteile.... siehe Bilder. Neupreis über 2000 Euro.

Preis: VB 950 €

Roland Wendler

Tel: +497032 83818

rolandwendler@t-online.de

V22 osprey scale kit til salg

Gimbal til 3 stk. "1/3" kameraer

Hvor kan man købe en Gimbal hvor der kan sidde 3 stk. "1/3" kameraer.

Jeg vil gerne teste 3 kameraer på en gang og har bl.a. kig på 1/3" Sony Super HAD CCD.



/OY7371

Gimbal til 3 stk. "1/3" kameraer

Oil question about an H6750 NH cutter

I bought this cutter new, cut about 120 acres. I changed the blades an decided to check the oil even though it wasn't at the 50hr change time.

I had to add 8oz to the Drive module(it holds 10oz), I called the dealer. He gave me a new vent plug and told me to check some of the bolts for tightness, which I did. I cut about 40 acres more and brought the cutter home and was cleaning it up to put up for the winter and power washed it and decided to change the oil in the cutter. In the same module I took out the check plug and nothing came out. I took it to he dealer. My question is should I have had to add that much oil in that little of time? the next oil change is at 200 hrs or yearly????.

Thanks

Oil question about an H6750 NH cutter

tire sizes??

need some help with tires? looking at the super swamper vampires or the less aggressive bear claws and does anyone have these on there rtv? i know the thinner the tire it is better in the snow. i have 25x10 on front and 25x11 on the rear now will 25x9.5 on front and back look good?

tire sizes??

rtv 1100 problems

my rtv 1100 was in 4 wheel drive and wounld not go back to 2wd and then the motor died and wont start . any feedback will help.

thanks , ronan281

rtv 1100 problems

NH 650

Anyone know how big a chore it is to change the sledge gears and bearings?

NH 650

Lego Technic - FLYVER

Hvem skal ikke prøve kræfter med denne?



Normal prisen er 949,- Bilka har den til 700 i deres tilbudsavis, derfor den lave pris 600,-.



Bemærk at den er 24 timer gammel og adskilt igen :)



http://ift.tt/1xRqQM5



mange timer sjov og byggeglæde :D



evt. bytte med andet spændende...





PS. suser til Kbh fra odense i morgen tirsdag, samt onsdag og fredag :)

Lego Technic - FLYVER

Købes Fokker DR-1 gerne simprop

Subj. købes gerne simprops omkring 80cm til min OS.0,26fs :)



Hilsen John

Købes Fokker DR-1 gerne simprop

Bandit

Nogle her der har haft Bandit, Ultra Bandit eller Super Bandit?



Mvh BR.....

Bandit

Can Mobil 1 TDT 5w40 be used in our RTV 900s

When Auto Zone ran a sale on Mobil 1 TDT 5w30 synthetic at such a low price by mistake, I stocked up. Normally it's like $26-28/gallon container, and they ran it on sale for $12.99. I'd be embarrassed to admit how many gallons I bought, but I use it in my F250.



Would this not be advisable to use in our RTV 900s, or would this be a good recommended change? Mine is a 2004 model.



Any pros or cons switching to this oil?

Can Mobil 1 TDT 5w40 be used in our RTV 900s

Ny mand måske

Går og kigger lidt på noget kunstflyvning og vil gerne have lidt info ang motorsetup, hvad er fordelen ved de gearede motore i forhold til direkte træk som jeg har på mine IMAC fly?

Ny mand måske

Gallagher smart energizers

Anyone use or have any experience with the Gallagher smart energizers (i series)?



Gallagher smart energizers

'04 RTV900 hard start

Just started occurring when trying to start cold or even after it has warmed up somewhat. Engine turns over strong but doesn't start until six or seven attempts. Then all of a sudden she cranks up and runs just fine.



At first I was thinking it was the glow plug or relay since the weather has turned cold here. Then after it finally starts and after I run it for a while and shut it down...same thing. I have to crank it several times before it will start. Maybe it is not warmed up enough to not rely on the glow plug to assist starting?



Any thoughts? I checked the fuse to the glow plug and it is fine. Where is the relay? I think it is the small box next to the fuses? How do I test the relay and glow plugs?



Any help appreciated....

'04 RTV900 hard start

2m-konkurrencer i 2015?

Er der nogle som går med tanker om afholdelse af 2m-konkurrence i 2015? SMSK har generalforvirring om 2 uger og jeg vil lægge op til, at der afholdes et 2m-stævne hos SMSK - gerne "tidligt" (~ ultimo april) pga græslængder diverse steder.



Håber at Poul Møller, Jan Sig m.fl. igen er friske i NMFK?



Andre på Sjælland?



Kunne være herligt hvis vi kunne nå 3 konkurrencer - sådan ca. primo maj, primo juli og primo september.

2m-konkurrencer i 2015?

Sisal or plastic twine

Hi, I'm new to Hay Talk. I'm just a young guy farming his family farm. I make about 6-7k bales a year. I've always used Brazilian Sisal twine but the last few years I've tried several different brands and they are all inconsistent in thickness throughout the spool. For small square balers you can pretty much only find 9000 twine. I'm thinking about switching to plastic. I have a 1980 JD 336 baler that works very good. Suggestions or comments? Thanks in advance.



Sisal or plastic twine

Eastern US guys how often do you fertlize your alfalfa?

I live in Eastern TN, my soil make up is a mixture of red clay, sand, and loam. Soil ph last year was 6.8. Everyone around me fertilizes after the first cutting. The more articles I have read has got me to thinking I should split my fertilize and apply after the first and third cutting. What do you do?



Eastern US guys how often do you fertlize your alfalfa?

Electrical problem

Hi everyone I am a new member. I have enjoyed the information, suggestions and the classifieds. So here I am. I have an '03 L4610 Kubota. Ran out of diesel so I was bleeding the fuel to get it running. Was cranking over just fine and suddenly there were no indicator lights illuminated on the dash and there was nothing when I turned the key. I mean absolutely nothing. It was as if the power source, battery had been removed. Here's some history although I'm not sure they are related. For some reason the ground wire for the headlights had overheated and fried the entire ground wire to those lights. History over. While my son was cranking I was looking at the wire situation to repair it. That's when the power went away and still even after all my troubleshooting it still has no power. Help, help, help Thanks, I kind of chattered on and on. I'm not sure if this is a new thread or not. I guess I need lots of help

Electrical problem

Hay Hauling

Thinking about gettting a new trailer to haul round bales on. I will be pulling with a f350 flatbed , Any suggestions on the length I should get . I will be moving squares and rounds. Looking at a 25ft gooseneck with a 5ft dove. Does anyone know how many rolls I can haul with a trailer that size and how many squares will fit on that size.



Hay Hauling

My neighbor wants me to help him find 2-4 calves

He is a dear neighbor and friend getting up in the years. As the years have gone by, he has given me more and more responsibility to take care of his small herd (4 cattle, 2 mini donkeys)

He sold off his last 2 cattle and wants to start over. He isn't computer savvy and wants me to locate some for him.

Sounds like his upper budget is $1,000 each delivered. Wants to buy 2-4 head. Wants them to be just off being weaned and wants them castrated.

Says he doesn't want any bulls because grand kids cut through pasture all the time.

Likes the dexter, angus, belted Galloway, Hereford breeds. Something that "looks healthy and strong"....



What do I do? This would be my first cattle purchase.



My neighbor wants me to help him find 2-4 calves

TD95d PTO not working

The PTO stopped working on my tractor. Any ideas on finding the problem?

Looks like all the cables are connected and working, just can't find the problem.

It turns over but very slowly. I don't use the pto often.



I have the repair manual.



Thanks.

Monte

TD95d PTO not working

Sælges: Motorcykel, Anderson M5 Cross, scale 1:5

Motorcykel, Anderson M5 Cross, scale 1:5, Kørt meget lidt, derfor næsten som ny, komplet med anlæg, gyro i baghjul for lettere kørsel/balance, sæt et standart TC car lipo/bat eller lignende (omkring 6-7,4V ) i, og du er kørende, kan afh i Århus eller Esbjerg andet efter aftale



Foto se http://ift.tt/1utUK8r



Pris 1000

Sælges: Motorcykel, Anderson M5 Cross, scale 1:5

mulch hay

Trying to get a price per ton range on much hay. I've heard native grass (weeds) are starting to repla e straw for reclaim / erosion control. I also hear the mushroom plants also are buying much hay instead of straw



mulch hay

05 RTV 900 front differential problems???

2005 900 diesel. 4x4 doesn't work



I have power out of the transfer case and into the front differential. But I dont have any power out of the front differential. The diff doesn't make any bad noises. I just don't have any power out of the diff. Any ideas?

05 RTV 900 front differential problems???

OS FS 120 ombygning.

Er gået i gang med at ombygge min OS FS 120'er til at køre på benzin og kunne godt bruge lidt erfaringer hvis andre herinde har prøvet at konvertere en methanoler. Her tænker jeg på om der skal laves om på kompressionsforholdet, og hvor meget olie skal man have i benzinen? Alle erfaringer og råd modtages med kyshånd:) Der er sikkert mange som synes at det ville være nemmere at købe en færdig benziner, men jeg gør kun det her fordi det kunne være sjovt og se hvor godt man kan få sådan en fætter til at gå på benzin. Jeg har bestilt tændingsanlæg hos justengines og har en walbro karburator fra en 22 ccm. Hondamotor, som jeg tror vil passe godt. Billeder vil komme senere når jeg kommer lidt i gang!

OS FS 120 ombygning.

Problemer med Align ESC!!

Hej med jer.



Efter flere flyveture med min T-rex 500 ville jeg testflyve da den havde stået et stykke tid på hylden. Jeg havde planer om og sætte et Airwolf skrog på den. Men pludselig har jeg problemer med at den accelerer op til max omdrejninger når jeg slipper throttle hold som om der ikke var en ESC. Er min ESC brændt af, den anerkende at den får strøm når jeg tilslutter batteri men Fuld skrald eller ingenting???? Irriterende. Nogen der har prøvet lign.??

Problemer med Align ESC!!

What size tractor for round baler?

People always asking how small of a tractor they can pull a baler with on here so I thought I'd share a pic of my latest baler tractor. Its a 240 massey on my 468SS baler, pulled it just fine (right into the barn).

Attached Thumbnails

• 

What size tractor for round baler?

Stormodel

Mangler en tom flyver til min Dle 55.. Gerne noget Extra,Katana eller Yak. Og selvfølgelig til en god pris.

Hvad har i??



Vh..

Stormodel

Buggy drager

4 linet trækdrager (Ecco ) i flere størelser , største 9kvm og mindate ca 5kvm . 5 forskellige .

ring hvis du er intereseret

Tom

Buggy drager

DEERE GATOR 6X4 hood, fenders etc on Craigslist

JOHN DEERE GATOR 6X4 FENDER, HOOD, PARTS, FAN, BARS, OLIVE GREEN - $99





I just noticed this listing on CL, in case anyone is looking for parts. Looks like somebody bid a mil-surplus auction.



I don't know any more than what I see in the ad.



Location 100 miles east of San Francisco.

DEERE GATOR 6X4 hood, fenders etc on Craigslist

Sælges E Flite Mistique 2.9ARF

Davs.

Da det begynder lidt at knibe lidt med pladsen her i hangaren, vælger jeg at sætte denne svæver til salg.



http://ift.tt/1q3kOqH



Flyet er sprit nyt og har aldrig fløjet, men er kun færdig samlet.

Det er monteret med :

E flite Power 25 Bl 870 KW motor

Pentium ESC 60 Amp med BEC

4 stk Hitec HS-125MG vinge servoer for krængror og bremseklapper

2 stk Savöx SH-0255MG højde og sideror

Der medfølger 2 stk EVO 3S 11.1V 2200mAh li-Po også helt ny og ubrugte.

Så flyet mangler kun modtager og en frisk pilot:)

Pris : 3000,- kr eller kom med et bud, men ingen skambud tak:p



Flyet står i Sabro ved Århus

Sælges E Flite Mistique 2.9ARF

Eflite Carbon Z Cub

Følgende sættes hermed til salg:



Carbon Z Cub



Fuldt flyveklar med 6 kanals Spektrum modtager(6210) UDEN ASX!!!!

Modellen er brugt, pæn stand, har aldrig været styrtet

Servo for træk af svævefly installeret

Pris:2000,00

Useriøse kommentarer i tråden, eller via PM frabedes!!!!

Eflite Carbon Z Cub

Oak leaves in hay

I'm going to bale the last hay of the year tomorrow and since I cut the field on Monday there have been a lot of leaves that started falling from the trees.....mostly red oak. This field is small and narrow so a large majority of the field has leaves that has blown into the hay. It is some very nice 3rd cut orchard grass but I'm concerned about selling it even at a slightly discounted price because of the leaves. Are the oak leaves toxic or will the animals not eat the leaves and pick just the hay?



Oak leaves in hay

K: graupner mz 18

Jeg søger en graupner mz 18, nogen der ligger inde med sådan en.



Kan kontaktes på 22479560

K: graupner mz 18

Nyt legetøj TBS Gemini og Jeti DS-14

Julemanden kom tidligt i år og gav mig gaver.









Jeti har været så søde at sponsorer lidt grej til mig.

Sådan en DS-14 er bare SUPER lækker, og glæder mig til at teste den.







Trappy mente jeg skulle prøve sådan en Gemini, og.. ja.. øh.. lad os bare sige at jeg nok ikke skal flyve lowpass proximity race med den :p

Nyt legetøj TBS Gemini og Jeti DS-14

t-rex clon dele hurtig levering

Jeg står og skal bruge nogle dele til min t-rex 500 clon bla landings stel og lidt andet småt .

viæle ha bestilt ved hobbyking men de har kun delene på deres øst lager hvilket er lig med lang levering og evt told/moms.

er der en net butik der har forholdsvis hurtig levering og samtidig rimelig billige priser?

t-rex clon dele hurtig levering

S: spektrum dx6i

Lettere brugt sender fejler intet pæn og velholdt



400kr

S: spektrum dx6i

Good information on hay harvesting.

Here is the Ah Ha information, I just fell upon this article 10 years ago.

What I did was print off a number of charts and graphs. Then I copied the charts and graphs and recopied the charts and graphs for a larger more useful chart or graph, Georgia says that bermudagrass cut on 42 day cycles will provide 12% CP hay.

http://ift.tt/1xzqPva This publication provided me some first very good information, that got me on the roads to higher quality as well as higher quantity bermudagrass & alfalfa hay yields. .

This has some good information for small square baling also/

http://ift.tt/1GWPFud

Dan Undersander has some good information that directly applies in the Humid East but requires some translation in the arid West.

http://ift.tt/1xzqPLq

The author of this one is an Ag Engineer who has measured with a fine micrometer But all his work has been done in Michigan, Wisconsin, and now Pennsylvania. Excellent information, but we must consider the local climates that he worked with.

http://ift.tt/1GWPFuh...

Some information on raking.

http://ift.tt/1GWPFuh...

Some information from Mississippi.

http://ift.tt/1GWPFuj

http://ift.tt/1xzqOHo

There are many more publications that have a lot of value, to some nuggets of information.

Something to think about. TAMU 20 or so years ago tried a range of bermudagrass yields. They applied up to 800 lbs/A per season and had some phenomenal bermudagrass hay yields. Normal bermudagrass yields are easily in the 12 - 14 % protein levels. BUT the TAMU soils lab report normal hay to be in the 6% maybe 8% protein levels. This is saying Texas Hay producers are leaving a good bit of their standing hay quality and quantity was left on the ground. I believe with different goals and longer harvesting intervals the total yields could have been higher with more useful quality results.

A few years ago I suggested some qualified Professional come up with presentations for the growers improved yields.

Sixty years ago I learned to bale hay. 30 years ago I learned there were better ways to put up hay. Now I expect to learn more every year.

We have all been told we should rake hay above 40% moisture, to hold the leaves. That actually was only half of the story. The leaves dry much faster than the stems. We can dry hay that the moisture tester will report above 40% moisture, when the leaves are gun powder dry while the stems are still wet enough to give us a false security, as we rake all the dry leaves off the still damp stems.

There more publications than I have here. There is additional good information that has been updated and the links have changed.

If & when you find later information pass the word. jfbw@aol.com .

Good information on hay harvesting.

On-line Hesston baler knives source

Does anyone know of a good source for Hesston Baler knives. I have a late model 4550 that needs a full set. Local dealers seem to think they are made of gold, and as they are all 100 miles from me shipping is a killer too.

On-line Hesston baler knives source

Futaba R6208SB til Salg

Har en futaba r6208sb rx til salg.

Pris 450kr. Med fragt.

Kan kotaktes på 60372286 eller kan afhentes i Hasselager(syd for Århus).



Mvh

Mo

Futaba R6208SB til Salg

Graupner mz 18/24

Hejsa. Søger sådan en her. Enten 18 eller 24 Nogen der har noget på lager.



Jeg kan kontaktes på 22479560

Graupner mz 18/24

Jeti SPIN 99 PRO opto

Jeti SPIN 99 PRO opto

Brugt til <5 flyvninger, 800kr



Thomas

32321632

Jeti SPIN 99 PRO opto

P51b

Hej skala nørder ;-)

Er der nogen der ved, om den 1. Mustang P51B havde krængeror sideror, og højderors flader i hel alu, eller de var lærred beklædt, som på p40'eren?

Håber på svar.

Mvh. Jesper

P51b

land working tools for planting alfalfa and other forage crops

I'm wondering what is everyone's favorite way to work land before seeding new alfalfa. What implements and whatnot. Thanks in advance



land working tools for planting alfalfa and other forage crops

Hjul til Dolly

Mangler 4 stk hjul ca.15cm i diameter.

Ved nogen, hvor man kan købe sådanne hjul, må ikke være for tunge.

Ring til 30428615 -eller mail til pkbose@mail.dk

Hilsen - Bose

Hjul til Dolly

I'm an idiot

Before I start, yes I know I'm an idiot. I was changing oils in all my machines and instead of going 1 at a time, I tried to be some stupid assembly line operator. Well onmy RTV900, I forgot to drain the oil. I added three quarts and when I started it and took for a test drive it started knocking real loud and throwing.black smoke. I knew something was majorly wrong. I went to shut off the machine and it kept running for like another three to five mins. I kept putting key back in ignition and moving to shutoff position and it eventually shut off. I drained the oil and it kept showing high. I have now drained 6 qts which would be double.. it's still showing high.. is there a chance somrthing else spilled into there? My plan is to drain everything completely then add in the right amount. Should I be okay or do you all think I have screwed something up royally with my machine?

I'm an idiot

Any link system

Er der nogen som kan sige omkring any link systemmet om hvis man køber dette sæt, at man kun bruger det ene gang for at få sit fly fra Hobbyzone kodet ind og derefter virker systemet og man skal ikke flyver med systemmet sat fast på sin sender.

Any link system

RTV900XT Enclosures

I haven't posted on the site for a while but I still lurk from time to time. Great to see it's still active!



I'm considering getting an enclosure this winter. I did a search and saw some older posts but nothing too definite on what we really like or what we really DON'T like. I don't mind spending a few bucks for a good product that easy to get in and out of and that I can see through. We do get in and out of the RTV frequently so something with zipper or Velcro door openers probably won't work. It doesn't have to be super tight since I'm not out plowing snow or anything like that.



I have the Curtis FOPS roof, no windscreen, and the raised air cleaner option. I don't mind taking the FOPS off for the winter if needed.



What should I get?

RTV900XT Enclosures

Hvilken quadcopter er god at starte med?

Hejsa



Jeg går og kigger efter en god quadcopter/drone. Hvad er godt at starte med?



Jeg evner ikke at styre en 6-kanals 3d-helikopter (har forsøgt uden held :-) ). Jeg har en coaxial-helikopter, men den er efterhånden kedelig at flyve med. Så jeg skal prøve noget nyt.



Den skal gerne kunne holde sig nogenlunde stabil, hvis jeg slipper styringen - og helst have kamera.



Jeg har kig på en LaTrax Alias, men den er måske lidt lille og er uden kamera. Jeg ville helst have en DJI Phantom 2, da den skulle være temmelig stabil. Den er dog lidt dyr.

Har I andre bud?



Mvh

Rasmus

Hvilken quadcopter er god at starte med?

RR ALFAGRAZE 600???????

Stopped buy the New Holland dealer the other day.... We got to talking alfalfa... He said the best alfalfa he ever raised was alfagraze.... I went home and got to searching and found a rr alfagraze 600. Would like to hear some reviews on. If I raise it I will be selling it to horse and goat customers. I currently raise rr pioneer alfalfa.



RR ALFAGRAZE 600???????

Turnigy 9XR sender mode2 + modtager m.m.

Har en spliterny Turnigy 9XR sender med et FS FS-TH9X-B-Module og et Flysky 2.4ghz 6ch Receiver Fs-r6b Ct6b plus et ny lipo batteri til senderen.

vil man skifte mode har jeg ekstra kontrol units til at skifte

disse modtager funker med modulet vis man har brug for mere

http://ift.tt/1jGUgGU

alt er ubrugt kun modtageren afprøvet med den gamle 9x så den skal bindes nyt

hele herligheden 600 kr ex forsendelse ca.80 kr



her links til produkterne



http://ift.tt/1jGUgGU



http://ift.tt/1GRWm0x



http://ift.tt/1xvzIWs

Turnigy 9XR sender mode2 + modtager m.m.

Leaky valve stems

Hi all,



Lookin for some advice from the rtv brain trust.



I noticed my rtv starting to buck a bit at high speed and checked the tire pressure. Every valve stem leaked, in fact every valve stem could be turned by hand and I could have deflated them by simply pushing against them. It's strange that this seems to have happened all at once. The tires are the originals and 8 years old (but only have 75 hours on them).



Anybody ever have all their valves go bad at once?



Anyone have a trick for installing new valves without breaking the bead (or the bank on new tools?



Thanks in advance for ideas



Treehouse (aka Ben)

Leaky valve stems

Blade Nano CPX bl

Jeg var ret glad for den gamle Blade nano, bortset fra at motor blev slidt op konstant, så nu har jeg bestilt den nye Blade Nano CPX børsteløs



Nu er den jo med 2 celler, så det bliver spændende at mærke forskellen.



Jeg skal nok vende tilbage med min mening når den kommer hjem.

Blade Nano CPX bl

Flyvende video-optagelse

Her er en tråd til diskussion af generel video-optagelse fra diverse flyvende RC-dimser. Dvs ikke egentlig FPV-udstyr. Videoredigering kan nævnes, men er måske lidt perifært.



Mulige tema'er: Hvilke action kamera'er: Størrelser og udformninger, fastgørelses-metoder, anvendelses-områder (search-and-rescue fx), framerates, farvedybde, generelle tips til gode optagelser samt lad-være-med!-advarsler.



Vis os dit (/jeres hvis klub-investering) grej og vær velkommen til at fortælle lidt om hvad video tilfører dig (eller din klub). Og helst ikke for mange BL9-4-pegefingre, selvom emnet naturligvis er berettiget.



Personligt: Jeg har ingen erfaring med video-optagelse og flyver primært RC-svævefly. Efter min mening har Speedster's video'er betydet meget for fremvisning af RC-svæv i DK og vist, at det ikke behøver at være "kedeligt" at RC-svæve - langt fra! :D

Flyvende video-optagelse

John Deere 569 vs. 569 Premium

Have two 568 Deere balers that have 14,000 bales on them. Looking to trade one or both of them in the off season for a 569. I really would like a 569 Premium because of the heavier design. Not for the automation. Is it worth the extra money for the heavier rollers and bearings? A lot of the used machines still have a year of warranty left on them...



Trey



John Deere 569 vs. 569 Premium

Spektrum

Spektrum DX6i kun brugt få gange til indendørsflyvning. 600.00 kr

Dansk brugsanvisning medfølger. Original æske.;)

42923240

Spektrum

Number of arms on a rotary rake??

My old Kuhn GA4100th had 9 rotary arms.... My new to me slightly used Krone 46T has 13 arms. Will there be anything noticeable that I can expect to see having more rotor arms?

Number of arms on a rotary rake??

Ønsker forbindelse

Hej, jeg fik en 10 cm Webra med bagudstødning rød top. da i havde intro møde her, kan det passe det var Torben Palsberg. vil du ringe til mig ? mvh. Jan Linnebjerg 7441 Bording Airport DK. tlf 20813878. på forhånd tak.

Ønsker forbindelse

Lowest price on Hay Pro II perservative??

Lowest price I have found on hay pro II preservative is $.82 per pound anyone else found a better price??

Lowest price on Hay Pro II perservative??

Sælges: Easy Glider

Easy Glider Pro



Fløjet 2 gange og som ny.



Vingeservoer er Hitec HS-65MG.

Sideror og højderor er HS-81.

Forberedt for flyslæbskrog.



Mangler kun modtager og modtageraccu.



Sendes ikke.



800 dkk



Mads Ullitz, 40887779

Sælges: Easy Glider

Skræntflyvning data

nåe jo man kan da også lægge sine data her



http://ift.tt/14an4T6



Her en side med skrænter



http://ift.tt/1xqQRR1

Skræntflyvning data

Fella tedders and rakes

NH dealership has a late model Fella rotary rake, looks to be in good shape, never seen much Fella stuff around here is it good stuff or is it more of an economy line. Still probably going to hold out for a new Pequea. (Made in USA I might add)

Fella tedders and rakes

misforstået

mærkeligt at denne side er til salg :confused:

http://ift.tt/1xqfGN8

men det er åbenbart ikke rc delen

www.multiplex-rc.de

micu

misforstået

Great Planes, Piper Cub sælges

Piper Cub 1m92 vingefang ,vinger beklædt med Oratex ,- aldrig været i luften, alt er nyt motor OS FS 70S II, Robart scale understel med scale hovedhjul.

4 stk nye Futaba standard servoer . 4,8 v batteripak og futaba modtager medfølger.

Den er som ny,da den endnu ikke har været i luften.



Knud Nauta

OY 7729

40769052 knn@stofanet.dk

Great Planes, Piper Cub sælges

Vermeer tedder

Well, our New Holland 4 basket tedder has finally puked for the last time. So tired of putting roll pins in the crappy design it has. Pretty much deadset on not buying a new Holland tedder but there are no good dealers around here. After doing some research it turns out that Vermeer, Pequea and New Holland 6 and 8 basket tedders are probably some of the best. I'm seriously leaning towards the Vermeer with its patented hooked tines and stout running gear and heavy frame. Does anyone have any experience with Vermeer tedders. I know that even the tines have a warranty on the vermeer- 3 years. Can't beat that. So throw some recomendations in please!



Vermeer tedder

Ny i FPV søger guidance :)

jeg har siddet og funderet over noget FPV grej, og har fundet disse ting og vil høre jer erfarende om jeres mening. Vil det være spild af penge eller vil det virke? hvad afstand skal jeg regne med at kunne flyve væk fra mig selv ?

Og vil det virke sammen med 2.4Ghz anlæg? eller vil de krydse frekvenser i ny og næ?

• 7 Inch HD FPV Monitor W/Sunhood High Resolution No Blue Screen (SKU100876)


• Dkr617.44

• Partom FPV 1.2G 8CH 1500mw Wireless AV Transmitter And Receiver (SKU127632)


• Dkr461.29

• Arkbird 1/3 Sony 960H CCD 700TVL FPV Camera For Aerial Photography (SKU173172)


• Mode: PAL


• 1.2G 3 Leaves 4 Leaves LHCP Omnidirectional Gain Antenna (SKU105488)


• Mode: L Type SMA Male
  
  Style: 3 Leaves


• Dkr34.80

• 1.2G 3 Leaves 4 Leaves LHCP Omnidirectional Gain Antenna (SKU105488)


• Mode: L Type SMA Male
  
  Style: 4 Leaves


• Dkr34.80

• 1.2G 3 Leaves 4 Leaves LHCP Omnidirectional Gain Antenna (SKU105488)


• Mode: W Type SMA Male
  
  Style: 4 Leaves


• Dkr34.80

• DC-DC Converter Step Down Module 3A 5V/12V Mini BEC For RC Plane FPV (SKU151702)


• Voltage: 5V


• Dkr13.93

på forhånd tak

Ny i FPV søger guidance :)

Realflight på imac

Hej er der nogen der har erfaringer med at køre realflight på en Mac?

Køber snart en iMac og syntes ikke rigtig jeg kan finde areofly 7 i app store.

Findes der nogle gode simulatore der er lavet til Mac?

Mvh

Dennis

Realflight på imac

Hearing Loss

Found a very informative article on hearing loss



http://ift.tt/1uWc1YY



Hearing Loss

Sitrex ST-780 H Tedder

Anyone have any experience with one of these. There is one coming up for auction next week, and looks to be in pretty good shape. I'm still debating on whether to bid or not.

Sitrex ST-780 H Tedder

Bording Nevs

Fandt endelig en artikel jeg havde søgt efter :). gå ind på GOOGEL SKRIV - NATHOLDET LØSER RYGEPROBLEM .

Bording Nevs

Købes: Align 1. Stk ds420 servo

Er der en der har ovennævnte i overskud? Det er til en af mine trex 250.

Købes: Align 1. Stk ds420 servo

Another RTV 900 stuck in gear

my RTV900 is stuck in gear...only able to go Medium Forward. Shift lever is stuck in N position though. Have read a lot of posts about stuck transmission but not this problem specifically. What should I check? Where should I look?

Another RTV 900 stuck in gear

Skapa ett konto : Professionella prada outlet-butiker, biz23.com

<strong><a href="http://ift.tt/1Evr3qb handväskor försäljning</a></strong><br>

<strong><a href="http://ift.tt/1Evr3qb handväskor utlopp</a></strong><br>

Nya Prada Väskor 2014 | <a href="http://ift.tt/1Evr3qb handväskor 2014</a> | Prada Bag 2014

Skapa ett konto : Professionella prada outlet-butiker, biz23.com

#sddm

{ margin: 0 auto;

padding: 0;

z-index: 30;

background-color:#F4F4F4;

width: 80px;

height:23px;

float: right;

margin-right: 70px;}

#sddm li

{ margin: 0;

padding: 0;

list-style: none;

float: left;

font: bold 12px arial}

#sddm li a

{ display: block;

margin: 0 1px 0 0;

padding: 4px 10px;

width: 60px;

background: #eee;

color: #F6F5c6;

text-align: center;

text-decoration: none}

#sddm li a:hover

{ background: #49A3FF}

#sddm div

{ position: absolute;

visibility: hidden;

margin: 0;

padding: 0;

background: #EAEBD8;

border: 1px solid #5970B2}

#sddm div a

{ position: relative;

display: block;

margin: 0;

padding: 5px 10px;

width: auto;

white-space: nowrap;

text-align: left;

text-decoration: none;

background: #EAEBD8;

color: #2875DE;

font: 12px arial}

#sddm div a:hover

{ background: #49A3FF;

color: #FFF}

Language



DeutschDeutsch

<a href="http://ift.tt/1AW2lRE;

<img src="http://ift.tt/1AW2m7W; alt="Français" title=" Français " height="15" width="24">Français</a>

italianoItaliano

EspañolEspañol

PortuguêsPortuguês

日本語日本語

<a href="http://ift.tt/1Evr7Gx;

<img src="http://ift.tt/1AW2jct; alt="russian" title=" russian " height="15" width="24">Russian</a>

arabicArabic

norwegianNorwegian

swedishSwedish

danishDanish

NederlandsNederlands

finlandFinland

irelandIreland

EnglishEnglish









Betalning |

Frakt & returer |

Partihandel |

Kontakta oss



Welcome!

Logga in

eller <a href="http://ift.tt/1Evr7WT;





Powered by Zen Cart :: Konsten att E -handelDin varukorg är tom



Powered by Zen Cart :: Konsten att E -handel

<a href="http://ift.tt/1Evr6lS Prada Väskor</a>

<a href="http://ift.tt/1AW2moB väskor</a>

Prada Saffiano Tote

<a href="http://ift.tt/1AW2p3E Plånböcker</a>







Valuta

US Dollar

CNY

Euro

GB Pound

Canadian Dollar

Australian Dollar

Jappen Yen

Norske Krone

Swedish Krone

Danish Krone

Kategorier

Hermes Handväska

Prada handväska

Prada Plånböcker

Utvalda - [mer]

2013 Prada 1N1674 purpur

2013 Prada 1N1674 purpurSEK 1,481.142013 Prada 1M1361 violett

2013 Prada 1M1361 violettSEK 1,615.182013 Prada 1N1674 körsbär rosa

2013 Prada 1N1674 körsbär rosaSEK 1,414.122013 Prada 1M1361 körsbär rosa

2013 Prada 1M1361 körsbär rosaSEK 1,615.18

Erbjudande - [mer]



Start ::

Skapa ett konto

Min Konto Information

NOTERA:[/b] Om du redan har ett konto hos oss, vänligen logga in från Logga in sidan.

Personuppgifter

* Obligatorisk information

Adress Detaljer

Förnamn:

*

Efternamn

*

Gatuadress:

*

Ort:

*

Län:

Vänligen välj ...

Alabama

Alaska

American Samoa

Arizona

Arkansas

Armed Forces Africa

Armed Forces Americas

Armed Forces Canada

Armed Forces Europe

Armed Forces Middle East

Armed Forces Pacific

California

Colorado

Connecticut

Delaware

District of Columbia

Federated States Of Micronesia

Florida

Georgia

Guam

Hawaii

Idaho

Illinois

Indiana

Iowa

Kansas

Kentucky

Louisiana

Maine

Marshall Islands

Maryland

Massachusetts

Michigan

Minnesota

Mississippi

Missouri

Montana

Nebraska

Nevada

New Hampshire

New Jersey

New Mexico

New York

North Carolina

North Dakota

Northern Mariana Islands

Ohio

Oklahoma

Oregon

Pennsylvania

Puerto Rico

Rhode Island

South Carolina

South Dakota

Tennessee

Texas

Utah

Vermont

Virgin Islands

Virginia

Washington

West Virginia

Wisconsin

Wyoming

*

*

Postnummer:

*

Land:

Välj ditt land

United States

Aaland Islands

Afghanistan

Albania

Algeria

American Samoa

Andorra

Angola

Anguilla

Antarctica

Antigua and Barbuda

Argentina

Armenia

Aruba

Australia

Austria

Azerbaijan

Bahamas

Bahrain

Bangladesh

Barbados

Belarus

Belgium

Belize

Benin

Bermuda

Bhutan

Bolivia

Bosnia and Herzegowina

Botswana

Bouvet Island

Brazil

British Indian Ocean Territory

Brunei Darussalam

Bulgaria

Burkina Faso

Burundi

Cambodia

Cameroon

Canada

Cape Verde

Cayman Islands

Central African Republic

Chad

Chile

Christmas Island

Cocos (Keeling) Islands

Colombia

Comoros

Congo

Cook Islands

Costa Rica

Cote D'Ivoire

Croatia

Cuba

Cyprus

Czech Republic

Denmark

Djibouti

Dominica

Dominican Republic

Ecuador

Egypt

El Salvador

Equatorial Guinea

Eritrea

Estonia

Ethiopia

Falkland Islands (Malvinas)

Faroe Islands

Fiji

Finland

France

French Guiana

French Polynesia

French Southern Territories

Gabon

Gambia

Georgia

Germany

Ghana

Gibraltar

Greece

Greenland

Grenada

Guadeloupe

Guam

Guatemala

Guinea

Guinea-bissau

Guyana

Haiti

Heard and Mc Donald Islands

Honduras

Hong Kong

Hungary

Iceland

India

Indonesia

Iran (Islamic Republic of)

Iraq

Ireland

Israel

Italy

Jamaica

Japan

Jordan

Kazakhstan

Kenya

Kiribati

Korea, Democratic People's Republic of

Korea, Republic of

Kuwait

Kyrgyzstan

Lao People's Democratic Republic

Latvia

Lebanon

Lesotho

Liberia

Libyan Arab Jamahiriya

Liechtenstein

Lithuania

Luxembourg

Macao

Macedonia, The Former Yugoslav Republic of

Madagascar

Malawi

Malaysia

Maldives

Mali

Malta

Marshall Islands

Martinique

Mauritania

Mauritius

Mayotte

Mexico

Micronesia, Federated States of

Moldova

Monaco

Mongolia

Montserrat

Morocco

Mozambique

Myanmar

Namibia

Nauru

Nepal

Netherlands

Netherlands Antilles

New Caledonia

New Zealand

Nicaragua

Niger

Nigeria

Niue

Norfolk Island

Northern Mariana Islands

Norway

Oman

Pakistan

Palau

Panama

Papua New Guinea

Paraguay

Peru

Philippines

Pitcairn

Poland

Portugal

Puerto Rico

Qatar

Reunion

Romania

Russian Federation

Rwanda

Saint Kitts and Nevis

Saint Lucia

Saint Vincent and the Grenadines

Samoa

San Marino

Sao Tome and Principe

Saudi Arabia

Senegal

Serbia

Seychelles

Sierra Leone

Singapore

Slovakia (Slovak Republic)

Slovenia

Solomon Islands

Somalia

South Africa

South Georgia and the South Sandwich Islands

Spain

Sri Lanka

St. Helena

St. Pierre and Miquelon

Sudan

Suriname

Svalbard and Jan Mayen Islands

Swaziland

Sweden

Switzerland

Syrian Arab Republic

Taiwan

Tajikistan

Tanzania, United Republic of

Thailand

Timor-Leste

Togo

Tokelau

Tonga

Trinidad and Tobago

Tunisia

Turkey

Turkmenistan

Turks and Caicos Islands

Tuvalu

Uganda

Ukraine

United Arab Emirates

United Kingdom

United States Minor Outlying Islands

Uruguay

Uzbekistan

Vanuatu

Vatican City State (Holy See)

Venezuela

Viet Nam

Virgin Islands (British)

Virgin Islands (U.S.)

Wallis and Futuna Islands

Western Sahara

Yemen

Zambia

Zimbabwe

*

Extra kontakt information

Telefon:

*

Inloggnings detaljer

E-postadress:

*

Lösenord:

* (minst 2 tecken)

Bekräfta lösenordet:

*



Hjälpcenter

Orderspårning

kuponger

Kontakta oss

Betalning & Leverans

Leverans

<a href="http://ift.tt/1Evr6Cr;

Betalningsmetoder

Heta Försäljning

Prada Nyheter

Prada handväska

Prada Plånböcker

Prada Travel Bags

Prada Glasögon



Copyright © 2012-2014 All Rights Reserved .

prada handväskor försäljning

prada handväskor utlopp

Skapa ett konto : Professionella prada outlet-butiker, biz23.com