New to me RTV x1100c. Will not rotate tires unless they are off the ground.
Took the HST apart and found one of the hst pump (valve block) plungers in bad shape. Replaced it with a new pump (valve block).
The motor valve block appeared to be in good shape.
Replaced both motor and pump valve plates with new ones.
Put things back together and it's no different than last time.
Put pressure gauge on charge pump and I'm getting 70psi that is in spec
Put pressure gauge on P1 travelling port and can only achieve 200psi.
Swapped the high pressure relief valve with another unit I have. No change.
Any tranny experts have an idea?
Took the HST apart and found one of the hst pump (valve block) plungers in bad shape. Replaced it with a new pump (valve block).
The motor valve block appeared to be in good shape.
Replaced both motor and pump valve plates with new ones.
Put things back together and it's no different than last time.
Put pressure gauge on charge pump and I'm getting 70psi that is in spec
Put pressure gauge on P1 travelling port and can only achieve 200psi.
Swapped the high pressure relief valve with another unit I have. No change.
Any tranny experts have an idea?
RTV x1100c Tranny Trouble
0 commentaires:
Enregistrer un commentaire