Trex 450 FBL

mardi 30 septembre 2014

Rigtig fin Trex 450 med næsten nye servoer og rotorhoved graupner esc med telemetri flyver kanon. 600 kr billeder kommer





Trex 450 FBL

Looking to buy a new holland hw340 rotary swather. Need advice

Alright well I'm lookin to purchasing my first rotary swather. It's a new holland hw340 it has 2200 hours and it has almost new super conditioners. Overall appearance 9/10. Anyhow I'm getting it offered for 30k$. What's some feedback on these things? I run two sickle new holland swathers now but need something for that tough pasture. I know that when you run a rotary u gotta know what rpms to run the header so it cuts clean. I don't like the job I see some rotarys do like leave real stemmy shit all over. How do u like the 340? What rpm do u run to cut clean? What knives do u use? I know there's different kinds. Anyhow any advice is appreciated.



Looking to buy a new holland hw340 rotary swather. Need advice

Krone KR250 high moisture baling

Hey guys I am just getting started into round baling and have a lead on a nicely kept KR250 basic baler. I know it an older 4x5 twine baler but wasn't sure if anyone has any experience with baling baleage type bales with one? I am only looking to do 40-50/yr the rest will be dry and only another 50 or so at that.



Just wondering if krone1 has any info as I seem to not be able to find much about this older baler.



Thanks,

-Matt



Krone KR250 high moisture baling

hyperion eos 0720i duo

Hej er der nogen der har en hyperion eos super duo 0720i, eller ved hvor man kan købe en, har prøvet forgæves at skaffe en





hyperion eos 0720i duo

Så er der gjort noget ud af det - skalabåde

med modelhavn med belysning osv. Det ligner noget der kunne være taget ud af det store modelanlæg i Hamburg.

Et stykke inde er der aftenbilleder fra havnen - næsten som at være der selv.



http://ift.tt/YOMylB





Så er der gjort noget ud af det - skalabåde

Year produced???

How/where do you find the year the tractor was manufactured. It is a TN65D New Holland. It is not on the plate with the model and serial numbers.

Thanks.





Year produced???

Small Bale buncher

Just getting started in the horse hay business, we have planted 100 acres of hay for this business, we currently have about 30 acres of high protein alfalfa that we either chop or bale into large squares but now we are looking for the best bale buncher on the market, have looked at Bale Bandit, Bale Baron & Multi Pack, not sure we want a new one, have seen many Bale Bandit's that are re-conditioned with what appears to be a decent price. Any advice???



Small Bale buncher

K: Resorør OS1.40

Hej mangler et resorør til en OS 1.40, er der nogen der har et billig på lager? :-)

Mvh Jesper





Sent from my iPhone using Tapatalk





K: Resorør OS1.40

Understel for 1/4 skala Mustang P51D

Hej



Jeg er på jagt efter understel og understelsben til min 1/4 skala Mustang P51D.



Jeg ønsker et elektrisk understel, og har kigget på Electron retracts.



Er der nogle der har erfaringer med understel i størrelse stor, så hører jeg gerne om det.





Understel for 1/4 skala Mustang P51D

FPV250 race er bare mega skægt

Til alle dem der kalder vores interesse for flyvende dimser eller bare generelt kun snakker nedladnede omkring vores gren af hobbyen, behøver hverken at se video'erne eller kommentere på dette indlæg::p



Positive vibes everyone :D



En lille ego skovtur





FPV250 træningsdag med "The Ugly Quadlings" [/URL]







Mvh. Jan Sig





FPV250 race er bare mega skægt

Hay Head for Hesston 9240

Hi, new to forum so please bare with me. I farm in east central Saskatchewan, run a small beef herd of 40 cows which I am trying to expand, along side a 4000 acre grain farm. I put up around 500 dry hay bales, mostly a mix of alfalfa and orchard grass and or brome. I sell my surplus at the moment. One cut, but looking at doing two if this wet weather keeps up. I have run an old 12' New Idea 5112 haybine, which was slow but got job done until this year. I borrowed a 16' New Holland 1475 to get me by this year which I really liked, except your looking back all the time! I already own a Hesston 9240 with a 30' grain head, so would like to get a hay head for that, rather than a pull type haybine. Hay heads to fit this machine seem fairly hard to come by and not cheap, so I want to make sure I get a good machine. Does anyone have experience with these? Pro's, con's etc. There are Hesstons and Massey models that seem to fit. My final question is if I were to buy a 1275 haybine or similar, can the cutting head be fitted to my tractor unit? Reason for that is they are easier to find and cheaper, and more flexible if I need to swath grain and cut hay at the same time. Any advice, tips or experience would be greatly appreciated. Hoping to have a functioning self propelled haybine by next hay season! (June 2015)

Thanks in advance,

William



Hay Head for Hesston 9240

488 NH Haybine

lundi 29 septembre 2014

My double sprockets that drive the rollers next to the pulley are worn out and NH wants 424.oo for a new set but I was thinking about cutting them off and replacing them with a weld on sprocket has anybody done this before and would it work?






488 NH Haybine

The carrot

Hilda and Maddie were in the garden harvesting the last row of carrots when, after a brief struggle, Hilda pulled an exceptional example from the ground and exclaimed, "oh my, this one reminds me of Ely!". Maddie asks, "it's just as big?". Hilda answers, "no, it's just as dirty."





The carrot

installing turn signal and flashers on the rtv x1100c

I got a deal on a kit to fit the regular 1100. I just don't or can't find where the flasher relay goes. anyone know where its located on the x1100c? everything seems to plug right in but the directions is for the older model and shows it to be located near the dump bed lever. I haven't removed the plastic to see but I am pretty sure that's not where it is on the new model. thanks for any help guys.:idea:





installing turn signal and flashers on the rtv x1100c

RTV 1140 motor

I'm in the need of a used engine and transmission for a 2012 RTV 1140.





RTV 1140 motor

QU4D med gimbal

Komplet QUAD med apm flight controller med et væld af muligheder... Telemetri til computeren eller tablet...

Tarot gimbal til gopro kamera... 3stk 3s 5000mah batterier 8kanals spektrum modtager... Vtx fatshark. 250mw 4i1 esc og 4stk 3506 t motors og et sæt ekstra props...







7000kr







Alt sælges samlet

Go Pro medfølger ikke





QU4D med gimbal

268 hayliner not tying

I just got a New Holland 268 hayliner. Always used john deere balers and I am new to New Holland and cant figure out how to thread the twine. The baler throws the twine into the knotters the first time and it looks like it ties but then it unthreads from the needles and I had to reset it I'm not sure if I'm doing it wrong or not any help would be awesome. I have a manual on order.



268 hayliner not tying

Advice on last cut / frost date

Hey guys need advice again. I've read about last cut and frost dates for alfalfa until I'm blue in the face and still have no idea of what to do. Here is the facts in my situation. For starters we wldnt be debating what to do but we are in need of the hay for our personal use. The field of alfalfa was planted last fall about this time so its essentially 1 year old. I took the 5th cutting on sept 4. Our average 1st frost date is Oct 23. Obviously if I didn't need the hay I wldnt cut it. If I have to get by without cutting then so be it as I do not want to harm the stand. But from you guys that know how bad are the risk of taking one last cut this late? We do not have snow cover if anything we get a few ice storms each winter otherwise our winters are typically mild with average lows in the high 20's with an occasional "extreme to us" low dipping into the teens. Weather is supposed to be in the low 80's for the next few days so I could cut, but from lack of knowledge I'm deff worried of what to do.



Advice on last cut / frost date

fixing plastic

Being proud owner of a brand new x900 I dumped my first load of firewood the other day. One piece managed to flip over the front of the bed and on lowering the bed crunched the black plastic gutter thing below. Since this is a large piece of plastic (looks expensive) and has a relatively minor piece broken out I want to try to fix it.

Q: What kind of plastic is this? What solvent / glue will work? Can it be welded (heat)?



I don't want the gutter to dump onto the shiny new engine.

Thanks





fixing plastic

Fantastisk sky

http://ift.tt/1pPAibv



Hvordan bliver den dannet?





Fantastisk sky

Vi lukker Forum en dag eller 2

Nu skal vi have ryddet op i det spammeri.



Vi lukker nok forum i en kort periode (forhåbentlig kun 1 dag) mens der bliver ryddet op.

Når vi åbner igen, vil der være indført manuel godkendelse af nye brugere.





Vi lukker Forum en dag eller 2

Katastrofe

Måske man nu skulle overveje mulighederne for at nye bruger ikke kan lave nye emner før en godkendelse?



Pt er der over 200 spam beskeder og sen stiger for hvert minut.. synes forum har været stærkt plaget af det i år..





Katastrofe

Killing quackgrass

I have a field of fescue/orchard mixed grass that has a lot of quackgrass in it.....when I got the field 3 years ago the quackgrass was just in smaller patches but in the last year it has really spread. I have not let it go to seed. The stand of grass is not the best so I'm wanting to kill everything and replant orchard and MaxQ in a few weeks. I'm hoping I can get a good kill on the quackgrass so I don't have it reappearing in my new stand. Will a heavy dose of roundup fully kill the quackgrass or is there something else that would be better to spray?



Killing quackgrass

Compra de Ocuflox generico preco, coste de Ofloxacin 5ml en usa

dimanche 28 septembre 2014

FARMACIA EN LINEA Ocuflox





























farmacia compra Ocuflox en linea

pedido Ocuflox Salt Lake City

farmacia compra Ofloxacin en usa Mississippi

farmacia a poco precio online Ofloxacin generico onde comprar Topeka

barato comprar Ofloxacin farmacia vendor con rebaja Badalona

farmacia saldo medicamentos genericos Ofloxacin en costa rica Rhode Island Logrono

pedido Ofloxacin en espana

vender rebaja Ocuflox en valencia

compra comprimido citrato de Ocuflox conceder descuento Boise

farmacia compra Ofloxacin en colombia

farmacia compra Ofloxacin comprimido a poco precio empaquetado

como comprar Ofloxacin argentina Montpelier

venderse con receta personas Ocuflox en espana Almeria

donde comprar Ofloxacin farmacia merca local

tabletas de Ofloxacin en colombia Cheyenne

generico Ofloxacin gratuiti Sacramento Columbus

http://ift.tt/1rwObQz

farmacia comprar Ofloxacin en valencia Fuenlabrada

generico Ofloxacin Montana

barato comprar Ocuflox generico preco

comprar em portugal Ocuflox 5 ml generico preco

farmacia a bajo precio sin receta Ofloxacin en pharmacie Arizona

farmacia a bajo precio sin receta Ocuflox Mississippi

enviar Ofloxacin en chile West Virginia

farmacia en peru de productos Ofloxacin en linea

farmacia comprar Ocuflox Augusta

farmacia en peru de productos Ofloxacin gratuito auxiliares de farmacia Getafe

precio Ocuflox South Carolina

barato compra Ofloxacin Oviedo

comprar Ocuflox en valencia Jerez de la Frontera



http://ift.tt/1BtQFjW

http://ift.tt/1BtQGV9

http://ift.tt/1rwObQH

http://ift.tt/1rwOc6V





Compra de Ocuflox generico preco, coste de Ofloxacin 5ml en usa

Effetti Collaterali Di Paroxetine Farmacia In Milano

Paxil Cr Farmacia Online Tags: comprare Paroxetine spedire nocivo Paroxetine suspension dosage effetti collaterali di Paroxetine farmaco comprare acquistare Paxil Cr comprare online effetti collaterali di Paroxetine comprare pastiglie hcl prezzo del Paxil Cr bello costo il farmaco Paroxetine pastiglie online della prezzo del Paroxetine comprare pastiglie hcl Paxil Cr comprare farmacia online plavix prezzo del Paroxetine in svizzera Paroxetine pill generic name order Paxil Cr online without a perscription Paroxetine phentermine fed ex prezzo del Paroxetine spedizione per comprare Paroxetine buspar Paxil Cr acquistare farmacia Paroxetine in farmacia su internet acquisto Paroxetine acquistare in farmacia su internet buy Paroxetine online avere per meno farmacia in france Paroxetine Paroxetine sconto buy Paroxetine how to order ordine Paxil Cr farmaco presenta Paxil Cr ricetta Paxil Cr inviare comprar comprare Paroxetine generico miglior prezzo on line acquistare Paroxetine comprare il farmaco farmacia on ricetta online Paxil Cr Paxil Cr in italia vendita should i take Paroxetine postale Paxil Cr per acquistare Paroxetine ed discount pack 1senza ricetta per Paroxetine comprare a basso costo Paroxetine pill acquistare Paroxetine farmacia buono giuseppe Paroxetine prezzi in farmacia on line Paxil Cr acquisto generico on line in svizzera acquistare Paxil Cr basso prezzo acquisto prezzo del Paxil Cr pillola comprare dove Paxil Cr farmacia prezzo mg pillole comprare Paxil Cr farmacia vendita a prezzi di occasione per Paroxetine bello prezzo Paxil Cr consegna a domicilio comprar ordine Paxil Cr roma discount generic Paroxetine cheap order acquisto Paxil Cr farmacia prezzo mg pillole prevacid acquisto Paroxetine farmacia prezzo comprare http://ift.tt/1BtQGEw http://ift.tt/1BtQF3m http://ift.tt/1BtQF3o





Effetti Collaterali Di Paroxetine Farmacia In Milano

Watering Fields

Ok,so I see people nearby that plant hay in their fields, and don't water it..? Then they go bale it a couple months later--which you can't do if you have sprinklers. My question is how are they growing hay without any watering system in sight? I went in the fields to check for sprinklers, and there weren't any source of a watering sytstem. How do y'all go about watering your fields?






Watering Fields

Get Dissertation Hypothesis On Nursing Philosophy For Money







Related tags:

make literature review on gay marriage

looking for research proposal on freedom plz

edit dissertation conclusion on music now

looking for report on criminology for 10

looking for someone to write my term paper on anthropology for money

write term paper on traditional please

how to order term paper on affirmative action for me

edit my thesis proposal on anthropology

how to get personal statement on nursing philosophy plz

looking for someone to write my research paper on business due soon

proofread my dissertation abstract on immigration for me

edit dissertation conclusion on advertising online

type creative writing on anthropology online

make my personal statement on violence in media asap

edit term paper on sex education for money

looking for someone to do my dissertation abstract on chivalry for me

need someone to type course work on censorship for $10

buy report on lifestyle for me

write creative writing on government for money

do dissertation hypothesis on divorce for money

edit dissertation abstract on art as soon as possible

need someone to do my dissertation chapter on life sentence online

type my essay on parents for 10

looking for someone to do my research proposal on minors plz

type my literature review on capital punishment for money

how to get report on biology now

how to buy movie review due tomorrow

how to purchase dissertation abstract on parents for money

looking for someone to write research paper on guns plz

looking for someone to do my case study on community service

need someone to write my personal statement on criminal offense for 10

looking for someone to make critical thinking on immigration now

proofread dissertation abstract on voting for cheap

proofread my dissertation results on violence in media now

looking for someone to write my personal statement on national security plz

need dissertation chapter on guns for 10

edit my essay on adoption now

looking for someone to write essay on business for cheap

looking for someone to do my report on age of consent

type my dissertation abstract on violence in media due soon



writing papers online

online writing papers write my masters level paper

dissertation writer dissertation writer

writing companies

free tutoring online

best essay writing site





Get Dissertation Hypothesis On Nursing Philosophy For Money

Robaxin Prescrizione Line In Italia

Online Farmacia Robaxin Tags: Robaxin mail order u s prescrivere una medicina Robaxin compra comprimido citrato de Robaxin B farmacia compra Robaxin online argentina barato comprar Methocarbamol en uruguay Robaxin farmacia en buenos aires farmacia no receta comprar Methocarbamol Methocarbamol pillola di farmacia Methocarbamol rematar con descuento alianza lima argentina comprar Methocarbamol gratuito Robaxin soft Methocarbamol in milano dove acquistare cheap price Methocarbamol made in india Methocarbamol per meno di avere Robaxin precio Robaxin prescription buy vender rebaja Methocarbamol gratis comprar generic Methocarbamol Robaxin farmaco sul comprimido sin receta farmacia online Robaxin V spedizione buy Methocarbamol online Robaxin precio en farmacia farmacia a poco precio online Robaxin generico preco Methocarbamol western union no doctors discounted Methocarbamol drug Methocarbamol dose packs online Methocarbamol consegna a domicilio effetti precio Methocarbamol en chile enviar Robaxin en espanol barato compra Methocarbamol en linea comprar Robaxin farmacia barato efeitos colaterais Methocarbamol a poko precio farmacia a poco precio online Methocarbamol comprimido a poco precio empaquetado donde comprar Robaxin farmacia barato efeitos colaterais vender rebaja Robaxin en canada low price Methocarbamol jcb fast http://ift.tt/1vnbMEB http://ift.tt/1vnbMEH buscopan overnight online http://ift.tt/Yzrno2





Robaxin Prescrizione Line In Italia

Comprar Em Portugal Trandate Farmacia Rematar Cont Descuento

Online Farmacia Trandate



























Tags:

buy Labetalol over the counter fedex

compra comprimido Labetalol on line

farmacia on ricetta di Labetalol

Trandate consegna a domicilio per l

farmacia a boost precio Trandate B

pharmacy Trandate online diners club

compera Trandate farmacia miglior prezzo

tabletas de Labetalol farmacia en mexico lomas verdes

pedido Trandate chile

buy Labetalol rx online

comprimido no receta ups online Labetalol en usa price

order Trandate check

farmacia in italia dei Labetalol

Labetalol pastiglie online acquistare

enviar Trandate en uruguay

no prescription Trandate no prescription

Trandate farmacia descuento productos

night fedex Trandate

farmacia compra Trandate por internet

compra comprimido citrato de Labetalol generico onde comprar

comprimido no receta ups online Labetalol espana

farmacia a bajo precio sin receta Labetalol sin receta

farmacia saldo medicamentos genericos Labetalol

Trandate comprare pastiglie

efectos secundarios Trandate en chile

Trandate descuentos

farmacia Trandate en las vegas

donde esta Labetalol generico farmacia

cheapest Labetalol available online

Labetalol farmacia descuentos medicamentos

Labetalol in napoli farmaci

paquete postal Labetalol farmacia fabricantes de medicamentos

postale farmaco Trandate italia

order Labetalol online with cod

comprimido a poco precio Trandate mg

eur per comprimido comprar Labetalol B

recapitare Labetalol

farmacia compra Labetalol venta en subasta transferencia bancaria

farmacia a bajo precio sin receta Labetalol en peru

generico Trandate en bogota

efectos secundarios Labetalol chile

paco rabanne Labetalol

vender rebaja Trandate en tenerife

donde esta Labetalol en usa

farmacia comprar Labetalol en linea

vender rebaja Trandate farmacia rematar cont descuento

Trandate no dr

precio Trandate rematar con descuento alianza lima

donde comprar Trandate en argentina



clomipramine online saturday delivery

http://ift.tt/1uVJOxo

http://ift.tt/1uVJQVX

http://ift.tt/1uVJQW1





Comprar Em Portugal Trandate Farmacia Rematar Cont Descuento

Acquisto Clarithromycin sicuro, effetti collaterali di Clarithromycin 500 mg online

FARMACIA ONLINE Biaxin







































prezzo del Clarithromycin Cuneo

Acquistare Clarithromycin farmacia senza prescrizione acquistare

ordine Biaxin 500mg farmacia milano

Acquistare Clarithromycin spedire nocivo

acquisto Biaxin pillola comprare il farmaco

http://forum.jnremodelingservice.com...p?f=3&t=125122

acquisto Biaxin compra pillola farmaci Chioggia

effetti collaterali di Biaxin prescrizione kamagra Lithuania

acquisto Biaxin Comprare Penisole senza prescrizione in Italia

http://ift.tt/1rwz2yD

comprare Clarithromycin farmaco farmacia delle Cremona

comprare Clarithromycin farmacia italiano

ordine Biaxin milano generico senza

comprare Clarithromycin recapitare page

effetti collaterali di Clarithromycin Singapore

ordine Biaxin Generico effetti collaterali

comprare Biaxin 250mg compra generico acquisto

acquisto Clarithromycin compera farmacia forum Udine

prezzo del Clarithromycin postale buy online

Acquistare Clarithromycin farmacia senza ricetta online

acquisto Clarithromycin comprare farmacia online Plavix Turin France

prezzo del Biaxin in napoli di Catania

effetti collaterali di Biaxin Collegno

effetti collaterali di Biaxin buy online bello costo

effetti collaterali di Biaxin Latvia

Acquistare Clarithromycin farmacia ricetta acquistare

Acquistare Clarithromycin Sanremo

ordine Biaxin farmacia bravo

Acquistare Clarithromycin farmaco farmacia acquistato Perugia

effetti collaterali di Biaxin comprare farmacia di

prezzo del Biaxin compra farmacia venta

effetti collaterali di Clarithromycin in italia vendita Reggio Emilia

comprare Clarithromycin Singapore

ordine Biaxin Comprare Generico senza ricetta Cerignola

Acquistare Biaxin acquistare di Savona

http://ift.tt/1uVJOgF

acquisto Clarithromycin comprare dove

acquisto Biaxin roma Modica

http://ift.tt/1uVJQFj

comprare Clarithromycin prescrizione farmacia online Czech Republic

prezzo del Clarithromycin prescrivere una medicina V-Noni che Norway

comprare Clarithromycin 500 mg bello costo on line

acquisto Biaxin farmacia prezzo mg pillole

http://ift.tt/1uVJQFl

prezzo del Biaxin farmacia prezzo mg pillole

effetti collaterali di Biaxin compra generico acquisto Lucca Switzerland

effetti collaterali di Clarithromycin rom United Arab Emirates

prezzo del Clarithromycin avere perl meno

effetti collaterali di Biaxin recapitare di

effetti collaterali di Biaxin farmacia senza prescrizione acquistare

comprare Biaxin farmacia prezzo mg pillole Prevacid

Acquistare Biaxin postale buy online Molfetta

acquisto Biaxin Venice

acquisto Clarithromycin comprare farmacia generico online Verona

comprare Biaxin buono costo Switzerland

Acquistare Biaxin 250mg farmacia bello branca maria



http://ift.tt/1rwz4Xh

http://ift.tt/1rwz2yJ

http://ift.tt/1rwz4Xh

http://ift.tt/1rwz4Xp





Acquisto Clarithromycin sicuro, effetti collaterali di Clarithromycin 500 mg online

Drum mowers

I've just about got to get something new to cut hay with before next year. Disc mowers have just gone up too much, since I last bought one. I have been looking at drum mowers. Specifically Zetor drum mowers. I roll up about 200 rolls of fescue hay every year. Anybody ever owned one? I hate to step out and buy one not knowing anything about them. At less than half the price of a disc mower, they are tempting. I'd like to have something bought to cut hay with before the end of the year.



Drum mowers

Hay barn or shed

I don't know if I should ask this here or under machinery. But after tarping hay yesterday and waking up to have them blown off I just about had it with tarps. I put up 3 wire bales and don't own a squeeze. I really don't need a fully enclosed barn more of just a shed type. Big enough for 10 to 12 thousand bales. Wondering if anyone can point me to an outfit that makes something like that. Thanks.



Hay barn or shed

New Holland BW28 balewagons

Looking to trade up. Wondering how these wagons have held up. Can't afford brand new and don't want a 1095( weak frames.)



New Holland BW28 balewagons

Looking For Someone To Make Essay On History As Soon As Possible







Related tags:

looking for someone to make dissertation on accounting for $10

how to buy dissertation introduction on music for 10

type dissertation introduction on architecture please

purchase dissertation hypothesis on reality for $10

need dissertation methodology on workplace

looking for someone to write presentation on accounting due tomorrow

buy research proposal on education as soon as possible

proofread essay on reality for cheap

do my research proposal on criminal record due soon

how to buy dissertation methodology on art

how to order research proposal cheap

make dissertation introduction on minors now

need someone to write dissertation methodology on gay marriage as soon as possible

type personal statement on immigration for me

write my term paper on sport due tomorrow

make dissertation chapter on physical education cheap

need someone to do my dissertation hypothesis on gay clubs

custom report on national security plz

proofread essay on brothels for me

need someone to type critical thinking on workplace

make personal statement on parents as soon as possible

need someone to do my dissertation conclusion on military plz

get dissertation introduction on cheating for me

write my research proposal on euthanasia online

need someone to write my thesis on mother now

need someone to type thesis proposal on video games for money

do dissertation conclusion on guns cheap

buy essay on workplace due tomorrow

looking for someone to do literature review on love

type my dissertation abstract on criminal record

custom report on economics now

write essay on physics plz

looking for someone to write dissertation on censorship for 10

looking for someone to make dissertation results on immigration for money

proofread course work on national security online

make my critical thinking on life sentence for money

write my report on linguistics cheap

order dissertation results on abortions as soon as possible

proofread my dissertation introduction on sociology for $10

proofread research proposal on traditional now

need thesis on life sentence for 10

looking for someone to do dissertation introduction on drunk drivers for $10

custom dissertation chapter on linguistics cheap

need someone to write creative writing on affirmative action cheap

how to purchase course work on social security numbers asap

looking for someone to do research proposal on drunk drivers for me

need someone to type dissertation on cloning for cheap

looking for someone to type my thesis on capital punishment now

need term paper on age of consent for money

looking for thesis on capital punishment for 10



custom homework on books

help me write my book report

write essay documentary

writing services canada

my best birthday essay

report writing for dummies

harvard essay writing

free pre algebra

highschool essay writing service

esl essay writing





Looking For Someone To Make Essay On History As Soon As Possible

Prezzo Del Ethambutol In Bravo Farmacia

Ethambutol Farmacia Online Tags: acquisto Myambutol italia Ethambutol farmaco per farmacia bravo la casta Myambutol effetti collaterali di Ethambutol spedizione farmacie online get Ethambutol online paypal prezzo del Myambutol a roma Ethambutol compra pillola effetti collaterali di Ethambutol originale acquistare Myambutol compra generico comprare Myambutol consegna a domicilio comprar acquisto Myambutol bello costo il farmaco american pharmacies for generic Ethambutol price uk los angeles spedizione comprare Myambutol farmacia senza prescrizione italia Ethambutol comprare Ethambutol milano pfizer buy Myambutol online compressa buy Myambutol tablet fast delivery acquistare Myambutol recapitare page Myambutol farmacia bello chieti trecator-sc ordine Myambutol in napoli di acquistare Ethambutol farmacia senza ricetta no prescription Ethambutol in internet medicine without prescription comprare Ethambutol comprare online canadian Ethambutol price prescrivere una medicina Ethambutol gmp ciclico Ethambutol spedizione gratuita ordine Myambutol farmacia compra Ethambutol drug development acquisto Ethambutol farmaco per comprare Ethambutol acquisto generico on line in svizzera Myambutol farmacia prescrizione acquistare farmacia gallia Myambutol Myambutol pill generic name Myambutol ed discount pack 1senza ricetta per Ethambutol senza ricetta che effetti collaterali di Ethambutol senza ricetta visualizza profilo prezzo del Ethambutol recapitare forum effetti collaterali di Ethambutol buy online venezia effetti collaterali di Ethambutol farmacia vendita a prezzi di occasione per cheap Ethambutol in internet diners club without prescription farmacia on ricetta online Ethambutol C order fast Ethambutol online mastercard comprare Myambutol rom effetti collaterali di Myambutol farmacia senza ricetta comprar gyne-lotrimin sin receta en usa http://ift.tt/10afbLs gyne-lotrimin generic 100 mg at promotional price or free offer how buy gyne-lotrimin canada





Prezzo Del Ethambutol In Bravo Farmacia

Købes : FBL controller

Hej jeg søger en IKON / Brain eller vbar 5,3 fbl controller som er iorden



hvis nogle har en brugt liggende til en fornuftig pris.:)



Mvh. Teknic





Købes : FBL controller

How many cattle and other questions

As some of you know, my very nice neighbor has me supply hay for his 4 cattle and 2 mini donkeys. I'm hearing he may get rid of all the cattle (2 will go to market this fall). The other 2 may be sold as well.

I want to approach him with the idea of me raising cattle on his pasture.

I know you're going to laugh, but its only about 4 acres. There was no problem raising 4 + 2 mini donkeys. I wondered how many cattle can I put of 4 very fertile acres? There's a small run in shed and a barn that holds 20 4x5 round bales. Fencing is very good and is wired for electric shocker.

I want to raise them and sell them. No pets. Just raise beef.

Of course I can supply all the hay necessary in winter from what I raise.

There is an excellent hay saver feeder, watering boxes, even a cattle chute for shots.

So given all that:



How many cattle can I reasonably raise?

What breed is most economical to raise and bring most $$ (He currently has Irish dexters and they are very docile, but I heard they grow slowly). I have no "breed loyalty" I do like the belted galloways my neighbors down the street raise and wondered if they would be a good source of advice on help with raising them?

How long do I raise them before they get sold?

What can I expect to spend per head for typical cattle PLUS all the other needs (shots, bag feed, etc.)



Thanks.



How many cattle and other questions

Tieing problems

I have a Vermeer 605k baler. Everything works good except when it's time to start tying the twine coming from the right side is caught and starts feeding but the twine from the left side will not catch. Every once In a while it will. I have to retract the arms turn off the pto get off and reach under to the end of the arm and pull out some twine and re start everything. I have tried backing off on the tension. Any help.



Tieing problems

Steffens vs kuhns vs hoeschler grapples

Hi everybody, I hope everyone has had a good farming season! I just have a few questions about grapples. I know there is a wealth of knowledge on here and I believe I have read up on most of the threads, but I still have a few more specific questions about these grapples.



First off let me start by saying that I am in the market to purchase a 18 bale grab that can pick up layers from a super 1049 stackliner. I'm was curious if anyone has had trouble with any specific brand breaking weld or bending while pushing bales of straw or hay, one layer at a time, into a semi?



My next question is has anyone had trouble bending the steel shafts that the hooks are connected to? The few grapples the neighbors have around here it seems like theirs are bent or at least slightly twisted, and I am just curious if one brand makes these heavier or better? Any problem breaking hooks to or I guess any other problems? I was a little worried about the plastic bushings kuhns and hoeschler uses on their grapples but after thinking about it I don't think it would be to big of an issue.



Sorry for the long post I'm just trying to make a informed purchase lol. Thanks everyone!



Steffens vs kuhns vs hoeschler grapples

x1100c Fuel tank gauge

I just ran out of fuel and 2 bars are showing? I wouldn't consider 2 bars as empty. Anyone else have a bad gauge?



Left me half mile from the house bring ewe lambs in which had to be loaded this morning by 9. I got it done but I ended up doing a lot of it on foot!





x1100c Fuel tank gauge

Size rotary rake for Kuhns Accumulator

Hey everyone, I'm planning on buying a Kuhns 1036f accumulator along with a new/used Kuhn rotary rake this fall or winter. We only drop about 10 acres at a time so I am unsure of which size rake to buy. Some say a 13'5" vs a 10'6" to allow more room for the accumulator and turning. Anyone have experience? The new price difference is roughly 2k between the 2 different sizes. Another rotary rake recommended in the 7 to 9k price range?



Size rotary rake for Kuhns Accumulator

Hvorfor går det ofte galt.

Er hermed lukket.



Da "man" ikke kan holde op med at sige dårlige ting om hinanden er den hermed lukket. " fjernet ".



Og skulle der opstå en ny tråd om det samme emne får den samme skæbne.



I kan forsætte på Facebook eller Twitter eller hvor man kan gøre sådan noget.



I kan også mødes til en kop kaffe og snakke om tingene.;)



Til Polle: Du havde ret. Det er et meget ømtålig emne.



Jan Møller

Moderator





Hvorfor går det ofte galt.

450 DJI drejer rundt ??

Hejsa



Min 450 DJI med Naza og GPS drejer rundt om sig selv, jeg har kalibreret stiks og jeg har kalibreret kompas , men alligevel drejer den stille rundt ( samme side hver gang ) den står ellers fint i luften stille og roligt , bortset fra altså at den drejer rundt......



Nogen som har en løsning på det :)



VH Bruno





450 DJI drejer rundt ??

JD337 knotter question

samedi 27 septembre 2014

It doesn't disengage the drive and will continue to cycle. Have it narrowed down to the clutch and the catch wont release. What does this involve to fix?



Havent tore into it yet



JD337 knotter question

Airbrusch maskine rewell

Er der nogen som har prøvet airbrusch sætter fra Rewell. Og om man skal bruge deres originale farve, eller man godt kan blande eksempel oracower farven til sprøjten. Eller har også set på proxxon sættet man kan købe. Men ville være fint hvis rewell sættet med kompressor kan bruges for alle type malinger. Og ikke kun deres eget mærke.





Airbrusch maskine rewell

Opgradering til 2,4ghz med analog servoer!

Jeg har en t-rex 500 stående med en hitec modtager og hitec HS82MG analog servoer. Jeg har nu købt en ny sender (futaba t10j med tilhørende R3008SB modtager). Jeg har taget den gamle modtager af og monteret den nye og sat alle servo ledninger i samme kanaler som før. Er det så bare at smide strøm på og binde senderen og modtageren? Eller er der andet der skal gøres/indstilles? Håber der er en klog på området:-)



Mvh.

Henrik





Opgradering til 2,4ghz med analog servoer!

852 new holland bearing replacement question

Got a bad bearing on rear floor chain main shaft. Looking at the parts break down a man should be able to slide the shaft out the other side far enough to change bearing but I can not get mine to move. Has anyone replace one of these bearings, my next step is a bigger hammer






852 new holland bearing replacement question

Beast x bytte til Ar7200

Hej :)





Skulle her mon være en som er interesseret i at bytte en AR7200 til en Beast x?



Jeg kunne godt tænke en AR7200 og dermed slippe for alt for meget lednings roderi.





Vh. Lars.





Beast x bytte til Ar7200

looking for w

Im 35 from western ky willing to move and relocate. I have 15yrs of baling experience and have my own dodge 3500 and a 6400 jd 2 wheel drive. I also have a 40ft camper that im planning on living in. Im drug free and never drink. Im tired of losing leasex land and cant get a bank to work with me to buy my own farm. So I would rather just be a good asset to a large hay producer. Thanks



looking for w

Købes: controller med GPS

Søger en Eaglee tree Vector.

Alternativt en Naza med gps.





Købes: controller med GPS

TN65D AC problem

My TN65D has had a slow freon leak since I have had it, about 7 years. I usually just add 134a to it with a gauge and it works fine. But this time I added the freon, checked it twice, blew out the ac cooling fan area, cleaned the cab air filters, and it worked for a couple of hours, but the compressor was clicking on and off. Now the compressor won't run at all. Any ideas??? Thanks.





TN65D AC problem

Pros/Cons of a Bale Bandit/Bale Baron

I'm looking to purchase a square bale bundler. Leaning toward a bale bandit, but I'm looking for input from those with experience with these machines or something similar.



Pros/Cons of a Bale Bandit/Bale Baron

new Holland 275

Anyone have experience with these 275 new Holland square balers? I've found one with a bad plunger bearing, how difficult is it to change and are they a good baler. I only do a few squares a year now and use a JD 14t I borrow from my father. Thanks for the input guys.



new Holland 275

Hvorfor går det ofte galt?

Hej alle.

Måske det er et ømtåleligt spørgsmål, men alligevel.



Jeg syntes, at jeg i mine snart 7 år inden for modelflyvning, at ha oplevet rigtig mange stridigheder.

Det er ikke unormalt, at folk bliver meget uvenner, og ofte er der internt i klubberne folk, der ikke ka tale sammen.

Min erfaring er at det er så lidt der skal til.

Jeg har siden jeg var knægt været medlem af mange klubber, og foreninger, og det eneste der ka nærme sig, var en haveforening, jeg engang havde et kolonihavehus i.

Der var også altid ballade, mellem medlemmerne.

Er der nogen der har et bud på hvorfor??





Hvorfor går det ofte galt?

Armering af Yak 130 edf

Hey hey derude..

Hvordan armerer jeg edf på Yak´en??? Er ny i edf branchen :)

Mvh Dan





Armering af Yak 130 edf

Erfaring med microflight.com (Plantraco Microflight)

Hej.



Er der nogen her der har handlet hos http://ift.tt/1qFDLsQ og har prøvet deres microfly og har lyst til at fortælle om deres erfaringer?:)



Mvh

Dan





Erfaring med microflight.com (Plantraco Microflight)

Super DK lipo-priser..

Det da en fin DK pris.. Dem skal jeg da prøve!:)



http://ift.tt/1vdViPb





Super DK lipo-priser..

Has anyone made a bale wrap like this?

vendredi 26 septembre 2014

I store bales in fields on stone or pallets. I don't have enough indoor storage for 1,000 4x5's and I don't like storing new bales inside.

With that in mind and with my hatred of tarps, does anyone make a waterproof bale wrap? Maybe even one that covers the edges a little?

That way the face of the bale doesn't get wet from rain or bleached from sun. Bottom of bale doesn't rot on the ground, but ends of bales can breath or sweat.

Maybe even a wrap that can breathe, but not allow water through it??

Didnt Deere try something like this?



Has anyone made a bale wrap like this?

S: 2 x futaba 2.4 modtager

Har 2 stk modtager tilsalg.



1 x 6208SB modtager.

1 x 6303SB modtager.



Tag begge for 950,- plus forsendelse.





S: 2 x futaba 2.4 modtager

DLE-35RA motor

DLE-35RA motor, billeder kommer hen over weekenden.

4,1hk

Næsten ny, fulgte med en model jeg købte, hvor jeg sætter en Saito i i stedet for. Der er stemplet 28 oktober 2013 på tændingsboksen:).

Lidt info:

http://ift.tt/1BhQjwI



Pris: 1200kr



Mvh

Thomas Pedersen





DLE-35RA motor

S: 2x 12V 575W strøm forsyninger (DPS-600PB)

Hej



Jeg har 2 af disse strøm forsyninger til salg.



De kan enten bruges enkelt vis eller sættes sammen i serie for at levere 24v.



4mm bullet connectore er på loddet.



Pris: 200kr pr stk.



Billeder: http://ift.tt/1naAzed



Kontakt:

Lasse Bo Larsen

tlf/sms: +45 71994213



/lbl





S: 2x 12V 575W strøm forsyninger (DPS-600PB)

MFA sport 500

Jeg har en gammel MFA Sport 500 mk2 med collective pitch som aldrig har været i luften. Er der nogen der har et forslag til hvilke servo, til en rimelig pris, jeg skal montere deri?





MFA sport 500

Tynd servo ledning, hvor?

Hej,



Jeg har brug for noget tynd flad servoledning, det er 0,8mm tykt men jeg ved ikke hvad det hedder i hverken AWG eller mm² så det er lidt svært at søge hos forhandlerne.



Nogen der ved hvad det hedder, ved hvor det evt. kan købes eller måske selv har noget liggende?



Mvh

Martin





Tynd servo ledning, hvor?

Hvilken Primer?

Hej.



Jeg er ikke mester indenfor maling, så hvis jeg skal prime en skala heli glasfiber-krop hvilken maling vil i anbefale mig at jeg bruge?



Jeg skal selv prime den men en professionel skal male den når den engang er færdig. Jeg vasker og sliber kroppen inden den primes med en airbrush.



mvh



Kent





Hvilken Primer?

ny forskning ? De ku da bareha spurgt forum

http://ift.tt/1CrTxAa



hehe det vidste vi da godt herinde hehehe :D





ny forskning ? De ku da bareha spurgt forum

John Deere 336 Problem

jeudi 25 septembre 2014

I have a 336 J,D that breaks the twine on the bale right behind the knot. Only on 1 side. I use sisal twine. Any suggestions






John Deere 336 Problem

Forstyrrer mobilmast?

Vi har efterhånden oplevet en del radio-udfald på vores bane. Det er blevet særlig slemt efter de har lavet en "opgradering" af den mobilmast, der står lige ved siden af vores bane.

Er der nogen, der ved, om sådan en mast kan have indflydelse på 2,4 Ghz anlæg?

De fleste udfald har været på Spektrum-anlæg.





Forstyrrer mobilmast?

JetCat P100RX model 2014 sælges.

JetCat P100RX model år 2014.







Landet i DK maj 2014 direkte fra JetCat i Tyskland.

Komplet med hvad der følger med fra ny inkl. footscreen 13:30 timers gangtid.



Pris kr 10.500,-





JetCat P100RX model 2014 sælges.

Grease Zerks on a Case IH 8465

I'm pulling a Case IH 8465 round baler home this Saturday. About 250 miles. Tires look OK.

Does anyone know if this model has grease zerks on the wheels?

Also wondering height and width. Not sure if there would be a way to put it on a trailer where it's located.

Couldn't find any specs online.



Grease Zerks on a Case IH 8465

SAB rotorblade

Kan det passe at SAB rotorblade er matte, dvs som en mat folie udenpå hvor man kan se "småting" inde under folien???

Jeg mener ikke at jeg kan se at man kan afmontere folien.....





SAB rotorblade

1992 Case IH 8465

I'm pulling a Case IH 8465 round baler home this Saturday. About 250 miles. Tires look OK.

Does anyone know if this model has grease zerks on the wheels?

Also wondering height and width. Not sure if there would be a way to put it on a trailer where it's located.

Couldn't find any specs online.



1992 Case IH 8465

Brande - københavn transport

Nogle der skal denne tur inden for nærmeste fremtid og vil hjælpe med lidt transport evt mod betaling.



Fra brande (den røde prik) mod kbh eller i nærheden.








Brande - københavn transport

Spartan VorteX VX1E

Hej



Er der nogen der har prøvet denne?



http://ift.tt/1n0TVCl



Er det noget der virker?

Prisen er jo helt OK, men er den nem at sætte op, og få til at flyve godt?





Spartan VorteX VX1E

Købes: Hyperion EOS 720 super duo

mercredi 24 septembre 2014

Jeg leder med lys og lygte efter sådan en bandit!!



Smid en SMS på 31500135 hvis du har en du vil af med.









Sent from my iPhone using Tapatalk





Købes: Hyperion EOS 720 super duo

Tegning til trækkerdreng

Nogen der har tegninger til slæbefly på ca 2,5-3 meter spv. Helst lignende en Paf Trainer, eller en stor Big stick. Har en 112cc liggende på hylden:D





Tegning til trækkerdreng

temp Guage reading on new 2014 rtv x's

I have a thread about heater problems on a new 2014 x900. For those that have the new x's how many bars on your temp guage do you normally run. Mine never gets over 2 bars even during the summer. Please let me know.



Thanks





temp Guage reading on new 2014 rtv x's

Got screwed on a belt bad.

Picked up belt for Rem grain vac at local implement $350,and I had to wait a day to get it.Just found it online for $66.






Got screwed on a belt bad.

Hjælp - problem med elmotor der ikke vil starte

Hej.

Jeg har haft et styrt med mit fly, Cessna 182 F-1420 med el motor.

Når jeg sætter batteriet til, giver motoren normalt tre toner og afslutter med en lang tone.

Nu kan jeg ikke få gang i motoren. Der lyder kun tre korte toner, den lange tone udebliver. Er det motoren eller måske LRP Speed Controleren?

Mon nogle af jer har oplevet noget lignende?



Hilsen Morten Vinther





Hjælp - problem med elmotor der ikke vil starte

Usamlet Hacker T-30 Katana 120cm skum

Helt ny ikke samlet - Hacker T-30 Katana, 1200mm purple skumfly - ligger i originalkasse ! Obs. Kan ellers KUN købes i USA.

Pris : 1100,- kroner. + porto.

Ps. Kan afhentes i Bogense.



http://ift.tt/1vgq73P





Usamlet Hacker T-30 Katana 120cm skum

Frsky dr4, volt

mardi 23 septembre 2014

Der står jo at denne modtager kan køre med ca 3.3 til 10,5v, ville høre om nogen bruger 1s lipo på denne modtager uden problemer før jeg tester om måske brænder noget af :-)





Frsky dr4, volt

Miniplanes.fr

Er der nogle der har erfaringer med denne hjemmeside?



Miniplanes.fr





Miniplanes.fr

dragon

ser godtnok lækker ud men py prisen ved hobbyking når der skal fragt og moms og told oveni :eek: vis den da ikke skulle komme i euwarehouse:D:D:D

http://ift.tt/1snozYx

micu:)





dragon

Simulator Søges

Hejsa!

Jeg er ny og håbefuld rc Helikopterpilot og jeg leder efter en god simulator (derved undgår jeg forhåbentlig at smadre min heli!)

Den må gerne være med det hele til, og helst Phoenix 5, eller Realflight.

På forhånd tak!

Henvendelser kan gøres på Tlf: 22361422

Vh Phillip





Simulator Søges

This article might helpful

Stumbled across this article in the farm paper we get out of Ohio. Thought it would come in handy



http://ift.tt/1mLdqyH



I have been using a round steel temporary fence post instead of a pipe



This article might helpful

Clearing Land for Hay Fields - Questions

We are going to have some old pasture clear cut hopefully in a few months. The growth is pine trees and the terrain is somewhat hilly. This area use to be for grazing cattle back in the day, but has been overtaken with pine trees for at least the last 30 years, and they are ready to be cut.



Where we can safely put a tractor, my plan is to make 4x4 round bales. We should reclaim around 20-30 acres total for potential hay production.



Question is - how to deal with the stumps left behind? Don't think it would be good to cut them flush with the ground, because most of the time flush is an inch or two above the ground, then the stump dies and the frost pushes them up further. I'm also getting to old to wait for stumps to rot too - LOL! Just don't see running hay equipment over old stumps - even if they are flush with the ground.



So how can we deal with these stumps? Again they are pine - not the most difficult or deep rooted stump. Is there some kind of drag a bull dozer might use to rake the ground and pull out the stumps or should the stumps be left some distance tall, i.e. 12-18 inches off the ground so a bull dozer can knock them out.



Any experience, tips, advice you could share would be most appreciated.



Thanks!

Bill



Clearing Land for Hay Fields - Questions

Os max 20 eller 25 størrelse

Jeg er køber til en os max la eller fx motor i størrelse 20 eller 25 størrelse. Den skal helst være ny. Skriv i en pm hvis i har sådan en liggende til salg. Skal bruge motoren til et retro projekt. Så det gør heller ikke noget hvis motoren er en ældre type, men bare ikke været tilkørt eller anden hvis. Og skal være en os max





Os max 20 eller 25 størrelse

Byttes med en flot lukket trailer til en Campingvogn

Jeg er på udkig efter en nyere Adria Action campingvogn hvor der kan indgå en lukket trailer som er blevet total bygget om således den er beregnet til transport af fly samt man kan bruge den til at sove i. Der er indlagt lys strøm 220 volt m.m. og beklædt med isolering og stof i hele vognen indvendigt samt gulvtæppe. Og udvendigt er vognen beklædt med film med flylogo på samt alle sidestykke er udført i galvaniseret plader m.m. Samtidig fik jeg sidste år lavet udvendig markise med der til hørende sidestykker og frontstykker som har en værdig af små 15.000,00 og kun brugt 2 gange.

Vognene er rigtig pæn og har påløbsbremse og max 750 kilo står vægttavlen til og som sagt vil helst have vognen med i en byttehandel for en Adria Action med panorama soltag plus fortelt.





Byttes med en flot lukket trailer til en Campingvogn

S: Multiplex Mentor

Flyveklar begyndermodel inkl pontonner, alm landingsstel, 2stk Hyperion 4s akkuer (et par år gamle)

Himax motor, klar med slæbekobling.



Pris kr 1400 - afhentet i Odense



Jan Rindahl, Tlf 40294259





S: Multiplex Mentor

K: Spektrum modtagere.

Hej.

Jeg mangler nogle modtagere, så skriv hvad i har i overskud.

Vh

Jan





K: Spektrum modtagere.

Notice of upcoming outage

I hate to do this but as you know, we've been having a few server issues. Of late we lost our redundant disk. New disks have been ordered and will be installed later this week. To copy all the data from the old to the new will take a good bit of time so I expect an outage of 4 to 8 hours.



Unfortunately this will not fix the other issue we have been seeing (memory leak), but we will feel that our data will be safer once new redundant disks are in place.





Notice of upcoming outage

tail light protector and rear mud guard kits

Just installed tail light protector kit and rear mud guard kit on 2014 rtvx1100c. The machine screws that came with the turn signal kit or the ones in original tail lights were just too short if installing both tail light protector and mud guards. You will need to get 1/4 to 1/2 inch longer to install both kits. This has been the only glitch with any of the factory accessory kits from Kubota. A quick trip to hardware and all is well. Just thought I would let you have a heads up on that.

thanks....Max :tiphat:





tail light protector and rear mud guard kits

Winch/pulley system for your buggy?

I am looking for a simple way to load deer from the ground up into my bed - since the bed lifts it seems like there should be a simple pulley system of some sort to load a deer. Even a hand winch would be fine. Any ideas or pictures of examples some of you have seen or used?





Winch/pulley system for your buggy?

hyperion balancerstik til board

jeg er indehaver af en lba10 net 6 s+ balancer og vil gerne kunne bruge den til og lade og balancere andre typer stik end hyperions egne , jeg har i den forbindelse købt ballancer board til diverse stik , men jeg kan ikke få det til og fungere med min lba 10 , jeg tror der skal et specielt kabel til fra lba 10 til boardene, er der nogen der kan hjælpe mig ,





hyperion balancerstik til board

S: Hyperion EOS 0720i NET3-AD

Har 2 af denne type som jeg gerne vil sælge.

De sælges samlet eller enkeltvis.

Der følger de kabler med som er med fra ny!



700,- stk.



Jeg har bl.a. brugt dem i sync mode til st lade en 12s pakke.







Stephen.





Sent from my iPhone using Tapatalk





S: Hyperion EOS 0720i NET3-AD

Plastik-kote

Jeg har et problem med skum-flyvere, jeg kan ikke lide skum-looket



Man kan selvføgelig dække skummet med glasfiber, eller stryge folie på, men det er tidskrævende, og kræver at man har et sted at sidde med det, og det kniber hos mig...



Jeg har tænkt på, om man ikke kunne sprøje skummet over med plastik på spraydåse, som feks. Plasti dip, som jo blot er en folie spray, som bla. bruges i autobrancen.



Det er meget stærk, og giver en glat og fin overflade, som er nem at reparere, blot ved at sprøjte en evt. skade over igen..



Og hvis man ønsker en extrem stærk skal, uden på skummet, kan man sprøjte det med Bedliner, så bliver vingen næsten uforgænglig, men man skal meget varsom med tykkelsen, da vægten eller hurtigt vil blive stige...



Har nogen prøvet det, eller har andre ide´r ?



Epo, og de fleste andre moderne typer skum, tåler jo opløsningsmidler, og burde ikke tage skade af det...



http://ift.tt/1r3nOmd





http://ift.tt/1vbrgto





http://ift.tt/1r3nOmj





Plastik-kote

NH 575 plunger fix

lundi 22 septembre 2014

Well I tore into my 575 today. I called the NH dealer to pull the plunger and change bearings and guide rails. I was told around $2000 or so. So me being me I opened it up, Had the plunger on the ground in less than 20 min. Bearings and new rails in, plunger back in all in less than 2 hr. I guess I am in the wrong line of work. I think there where 20 bolts or so. All broke loose no problem fast and easy. Now I am making GOOD SQUARE bales.






NH 575 plunger fix

Cessna 182 F-1420. Motoren starter ikke

Hej.

Jeg har haft et styrt med mit fly. Når jeg sætter batteriet til, giver motoren normalt tre toner og afslutter med en lang tone.

Nu kan jeg ikke få gang i motoren. Der lyder kun tre korte toner, den lange tone udebliver. Er det motoren eller måske LRP Speed Controleren?

Mon nogle af jer har oplevet noget lignende?



Hilsen Morten Vinther





Cessna 182 F-1420. Motoren starter ikke

noget forvokset dlg

der skrives godtnok hlg men han sender den dog afsted som en dlg:D

http://ift.tt/1uzY1zT

micu:)





noget forvokset dlg

Tbs Discovery fpv rtf

Tbs Discovery med core.

Dji opto 15a esc

Dji 920 ROM motor

Dji arme

Naza v2 gps flight controler

Dji dt7 og dr16 sender og modtaget

Boscam 200 5,8ghz video sender og modtager

Sony fpv kamera

Quantam LCD video briller fra hobbyking

3stk 2200mha 3s lipo



Prisen er jeg meget usikker på, så kom med et bud.

Og hvis der er noget jeg har glemt vil jeg forsøge så godt som muligt at besvare dem

Kan se tilsvarende er til salg omkring 5000kr






Tbs Discovery fpv rtf

Konvertering fra 35mhz til 2,4ghz

Hej Alle.



Hvis i stod og skulle konverterer fra 35mhz til 2,4ghz hvad ville i så vælge.



Senderen er en Hitec optic 6 med løst modul.



Jeg har corona 2,4 ghz men syntes bare ikke det er helt pålideligt udfald m.m.



Jeg har set assan har modul til optic6 noget dyre end corona men er det så meget bedre.??



Overvejer måske at købe helt ny sender istedet "spectrum måske."!!!!



Men med hensyn til modulerne, hvad mener i/hvad bruger i?





Konvertering fra 35mhz til 2,4ghz

Vermeer 554 XL Twine Arm Problem

I need help with my twine arms, when extended to tie, they are actually hitting the bale near full extension, which causes them to jamb. I have to then free up the arms where jambed in bale. The lower tie arm was hitting the pickup teeth, so i adjusted up, and then the upper arm started hitting the bale. My tooth to starter roll clearance appears to be right a 3", as does roughly 2" from pickup tooth to ground. I must be missing something, but i just don't seem to be able to have the arms high enought to clear the teeth but low enough to not hit the bale. ?? Hay on the ground and i can't get anything done?? This baler is new to me, so I am trying to figure out what to look for???



Vermeer 554 XL Twine Arm Problem

Kuglelejer til OS 120

Hej er der nogle der kender størrelsen på de 4 stk. lejer til en OS 120

Henning Boisen





Kuglelejer til OS 120

Hjælp til forfatter søges vdr. modelfly

Jeg kender en kendt forfatter,der er ved og skrive en ny kriminalroman,han har kontaktet mig vdr. smugling med modelfly og i romanen taler vi her om år 2007 + 2008.

Vi snakker om et modelfly der medføre og kan have 2 kg om bord,har i noget fly evnt billeder HUSK DET SKAL VÆRE 2007-2008 der kan opfylde forfatterens ønsker. På forhånd tak Rene'





Hjælp til forfatter søges vdr. modelfly

Installed OEM Heater in 2014 X900 need a little help

dimanche 21 septembre 2014

I installed the OEM heater in my X900 this weekend. Everything installed properly, but it is not heating right. The instructions said that was caused by air still being in the sytem.



I followed the instructions by loosening (if that is a word), the heater hose by the thermostat letting fluid come out then tightening. Next you open up the shut off valve hose (thermostat heat hose again), keeping it open until fluid comes out again. Then you should be good to go. Tried that several times, only thing that did was cause a mess.



Any ideas, will be calling the dealer tomorrow who sold me the RTV and the OEM heater.



Thanks in advance for any help.





Installed OEM Heater in 2014 X900 need a little help

Utydelig blue print tegning.

Hej.



Er der mon nogen her på forum, der har en fidus til at gøre en utydelig blue print tegning mere tydelig.



Så er jeg meget modtagelig for forslag.



Jeg har et Bud Nosen byggesæt Piper Cub J-3 270cm i spænd, hvor forreste 1/4 af tegningen er meget uklar. :(





Utydelig blue print tegning.

Søges. Big lift 2.

Søger en big lift 2 i fornuftig stand. Skal være sund, ikke en gammel olie vædet pind. Hvis de findes. Helst en Tom model. Byggesæt ikke int.



Skriv hvad du har, og en pris. Så tager vi den derfra. Gerne på pm.

Evt billeder til Kennethvestrup(snabela)hotmail.com Eller på 20996660.



Mvh Kenneth. :)





Søges. Big lift 2.

Hesston 8200

1.) I have just retired my second hay head off a Hesston 8200 windrower that has 7500 hours on the Fiat engine. I am looking to add a draper head to the tractor for swathing small grains. Would prefer a 20' head to eliminate a cart for roading. Are there any pull-type models that could be adapted to use with this tractor. What models would interchange onto this 8200 hook-up?

2.) I am looking to replace this hay cutting machine with another 8200 or a CIH 8830. Anyone have something sitting around that has 2000 or less hours?



bickfarm

SW Wisconsin



Hesston 8200

Soft 3rd cutting bales

I struggle each year with soft 3rd cutting bales that do not work well with

a bale wagon. If I make them solid they weight too much and if I make them 50 lbs

they are too soft even shortening them to 34 inches. The bale wagon does not handle

them well and some often fall off the stack in the barn. Do you have a solution

for this problem?



Soft 3rd cutting bales

big square spears

Anybody build there own big square spears or know any manufactors. Pictures and deminsions would be great. Want to be able to move 3 3x3s and/or 3 3x4s. I use pallet forks but want to move to spears because i think itd be faster and i could move 3 when pallet forks can only move 2



big square spears

Stick-y Situation

Just lately, I've heard a tic tic noise on the RTV. It has been such a long week with adding onto the barn that I put any investigation on the back burner. I have been spending long days in the skid steer moving gravel and leveling places to put gravel , so didn't look for the problem.

Yesterday though, I had some time and jacked up my 'bota and greased the ujoints and myself before it was all done, ( somehow the cap came off the grease gun) any ways, confirmed that one outer ujoint has slack one doesn't. I looked around and rotated the wheels .. no tic tic... no slop in the bearings neither even after 1850+ hours , then I start looking all over. I see a cracked heat deflector as a possible source and then under the transmission cooler on this 2011 900, I see a stick... it just has missed the poorly placed transmission cooling radiator and is protruding just enough for the engine fan it touch it. I removed the stick, and no more tic tic. Blessed again.. I was concerned the noise was coming from the engine but no. just a stick. :) Posting an inferior picture to get the idea - my camera phone is the "dumb" kind and cheap to operate.. so it fits me just fine but the pictures are .... bordercollie




Attached Images





File Type: jpg 0920141641.jpg (45.0 KB)







Stick-y Situation

brugt knaus sudvind 500 campingvogn til salge

fra 1991 5 sengepladser køjevogn salges pga ingen børne skal med nu.

19.900 kr link på dba er http://ift.tt/1tNUGPP





brugt knaus sudvind 500 campingvogn til salge

Elsvæver med FF9 Super m. 10 modtagere

Hej.

Super tilbud!

Køb denne sender med 10 modtagere og få en elsvæver gratis med i købet.

http://ift.tt/1DqUGcL

Elsvæver har v hale og en 180 cm i spændvidde.

Servoer og modtager er monteret.

Klar til og flyve. Er kodet ind i sender.

Spørgsmål?

Skriv i tråd eller på 20160664:)

Vh

Jan





Elsvæver med FF9 Super m. 10 modtagere

Bush hog claims "made in America" not so true?

I am wanting to replace my old 15' batwing with a new one. Started looking last week.

I started with bush hog. Upon close inspection, I noticed the gearboxes were stamped "made in China"

Next I went to my John Deere dealership. Same thing "made in China"

How can a company claim something is "Made in America", when the main part of the the product (in this case, the gearboxes) are made in China?

My current mowers John Deere have gearboxes made in Spain.



Bush hog claims "made in America" not so true?

Transmission stuck in 4wd

Newbie has a 07 RTV 900 that was sitting un used in a damp environment for several years. I changed all fluids and filters (used Cenex Hytran) fluid.:pat::pat: It seems to be sluggish, not a lot of power from the tranny. I was able to put it in 4wd with difficulty and that's where it stayed! I removed the cable at the tranny and cable and linkage up front are free. It's stuck in the tranny. I put some pressure on the lever at the tranny and I have no movement either way. I've used it on loose surfaces since thinking it may free up but no such luck. Help Please!

I'm an ole farm boy good with a wrench in the U.P.



Thanks

Dan





Transmission stuck in 4wd

Transmission stuck in 4X4

Newbie has a 07 RTV 900 that was sitting in a damp environment for several years not used. I changed all fluids & filters right away. With difficulty put it in 4wd and can not get back to 2wd. I've removed the cable at the trany and cable/ linkage is free. I'm an old farm boy good with a wrench. Help Please! I can not move the lever on the tranny where the cable connects.

Thanks

Dan in the U.P.





Transmission stuck in 4X4

Getting ready for winter!

Got my wood delivered this past week. 5 loads of logs plus about 5 pickup loads of butt pieces from cleaning up the logging loading area. The small light colored pieces are ash slab wood from the Amish sawmill. I don't want a repeat of last winter where everybody ran out and we had to fight the snow and ice to get more. The honey is for ambition when we get to cutting and splitting......:yum:




Attached Images





















File Type: jpg 002.JPG (137.5 KB)
File Type: jpg 004.JPG (137.5 KB)
File Type: jpg 005.JPG (138.0 KB)
File Type: jpg 006.JPG (137.1 KB)
File Type: jpg 008.JPG (137.0 KB)







Getting ready for winter!

Hitec 35 mHz FM modtager

Har du en eller flere i skuffen ?

Købes -

Henvendelse tlf: 40403383

Vh Flemming





Hitec 35 mHz FM modtager

Hitec 35 mHz FM modtager

Købes: Har du en eller flere i skuffen ?

Hitec 35 mHz FM modtagere købes.

Vh

FlemmingK

Tlf: 40403383





Hitec 35 mHz FM modtager

KØBES : 4 stk Multirotor-motorer 700-800kv

700-800 kv,i god stand.....





KØBES : 4 stk Multirotor-motorer 700-800kv

Valg af begynder fly....

Hej alle sammen,



Jeg har forsøgt herinde på forummet at finde svar på, hvad det bedste begynder fly er. Men jeg finder kun tråde fra før 2013. Så jeg vælger nu at starte en ny tråd...



Hvilket begynder fly kan I som eksperterne anbefale?



Jeg har selv kigget på Twin Star II. Den har jeg fundet til 249 euro (1850 DKK) hos Lindinger i Tyskland.

Jeg køber derudover også Spektrum DX6 (den nye sorte) oveni hatten.



Det kan siges at prisen ikke er den afgørende faktor. Det skal selvfølgelig heller ikke koste spidsen af en Falcon 7X.



/Rasmus





Valg af begynder fly....

John Deere 14t upgrade

samedi 20 septembre 2014

Hey guys and gals! Been using this sight for a long time and finally decided to join.

My delema is I have a 14t baler and it works perfectly but it is god awful slow like usually in first gear in relatively light rows. But when you get in to what looks like a nice tire you have to put the TA on (farmall 560). I was looking at a new Holland 268 and was wondering if it would be any faster. Any input or suggestions would be greatly appreciated.



John Deere 14t upgrade

565 knotter problem

I baled about 400 bales today and all of a sudden it wouldn't tie a successful knot on either side. Half the knot is formed on the chute side and the string is cleanly cut not pulled out or broken just not tied together. Any ideas? Thanks






565 knotter problem

Sælges: Kontronik Pyro 700-45 med lang aksel

Som ny.

Har siddet i F3C model jeg ikke længere bruger.

Har fløjet ca 80ture. Aldrig styrtet.



Nypris 2240,-

Sælges for 1000,-





Sælges: Kontronik Pyro 700-45 med lang aksel

The astounding athletic power of quadcopters

GIV MIG DEN CONTROLLER !!!! (og camera i loftet osv) :D



http://ift.tt/19XiZza





The astounding athletic power of quadcopters

Tachometer Cable

Good afternoon all,



I just purchased a John Deere Model 2030, diesel engine, ser. #22xxxx, with roughly 59xx hrs. I have come to the conclusion that the tachometer cable isn't working. What through me was that the hour meter is still working, but the tach. isn't. I bought a new cable, removed the two batteries, and came to an abrupt halt. Do you have to remove that bloody battery holder somehow, or how do you get to the motor side of the cable. I have a technical manual, and an owners manual, even looked up the part, all to no avail. Could someone please shed some light onto how you change this blasted thing.



Thanks

Doug





Tachometer Cable

To servoer på samme krængror.

Hvordan laver man ovenstående opsætning.





Hilsen hjhj





To servoer på samme krængror.

umbraco i tommer

jeg har en dejlig quad, men den er desværre opbygge med skruer i tommer. så jeg skal nok lige ha lidt værktøj til det.

jeg mangler en umbraco nøgle der ligger mellem 1.5 mm og 2 mm. hvad hedder den?? for så kan jeg bestille den på nettet et sted..



carl ras, biltema og andre dejlige butikker har desværre ikke sådan en bette en.





umbraco i tommer

Facing Alfalfa's Challenges

From Hay and Forage





Regards, Mike





http://ift.tt/1e0j7Az



Facing Alfalfa's Challenges

fusion emperor l702b pro firmware

vendredi 19 septembre 2014

Halløj.



Jeg har forsøgt at finde en firmware update til min fusion emperor l702b pro, men jeg kan ikke finde noget, er her nogen som ved eller har et link til hvor jeg vil kunne finde det ?



Jeg ville prøve med en ny/ nyere firmware da jeg har opdaget at på den ene kanal (2) vil laderen ikke lade på 3S batterier og derunder. Ingen problemer med 5 og 6 S batterier.





- Lars.





fusion emperor l702b pro firmware

Robbe servotester

ny aldrig brugt 150kr





Robbe servotester

Hvilken sender?

Hej alle sammen,



Jeg skal ud og investere i en modelflyver. Valget er en Twin Star II (skulle være en gooood begynder).

Men jeg skal jo også have mig en sender. Hvad for én kan I anbefale?



Jeg har selv kigget på en Spektrum GX5. Er den god, eller er den for billig? Hvis I selv skulle i gang med sporten, hvad for én havde I valgt?



Tak på forhånd,

/Rasmus





Hvilken sender?

Spektrum AR6255 350 kr.

Spektrum AR6255 carbon modtager 6 kanals, lavet til at bruge i en Carbon krop.



pris 350 kr.



porto 9 kr. som brev 60 kr. som pakke.



Med Venlig Hilsen Asger.





Spektrum AR6255 350 kr.

Godkendelse af flyvepladser

Ved gennem læsning af de sidste ref. fra de sidste bestyrelses møde ang. Godkendelse af flyvepladser.

Nu er der kommet svar fra trafikstyrelsen og ud fra det kan jeg se at de gamle MDK regler var rigtige.

Så kan man kun tænke tilbage på alt det brok der var til ingen nytte.



Her er hvad de skriver.

A) Behandling af respons fra TS på vores brev - kommunikation og implementering

Modelflyvning Danmark har d. 26. maj modtaget en henvendelse fra Trafikstyrelsen, som omgør den tilkendegivelse et af vores medlemmer modtog fra Trafikstyrelsen i sommeren 2013. Den nye henvendelse præciserer at Modelflyvning Danmark skal godkende alle anlagte modelflyvepladser uanset vægtklassen af modeller der flyves med. Det betyder i al enkelthed, at det ikke kun er stormodelflyvepladser men alle modelflyvepladser, der skal godkendes af Flyvepladsudvalget.

Trafikstyrelsen har i den anledning bedt om at få tilsendt vores regler og procedurer for godkendelse af flyvepladser. Forinden vil vi revidere og strukturere regelsættet.

I henvendelsen lægger Trafikstyrelsen vægt på at der fortsat ikke er krav om godkendelse af flyveområder, der ikke betragtes som anlagte. Det vil i praksis sige, at man selvfølgelig fortsat kan flyve på herrens mark uden MDKs godkendelse.





Godkendelse af flyvepladser

S: Batteri optima YTS 5.5 75AH spiralcelle med lader og batteriboks

Sælger dette da jeg ikke skal bruge det mere. Det er få måneder gammel og det er brugt 4 gange. Det står mig i 4000kr og der er kvittering med.



Tag det hele for 2200 plus forsendelse.



Læs om batteriet her:

http://ift.tt/Xu33Tx



Læs om laderen her:

http://ift.tt/Xu33TB
















S: Batteri optima YTS 5.5 75AH spiralcelle med lader og batteriboks

Graupner og SMUD bussen

Hejsa Jeg har et problem som jeg gerne ville have lidt hjælp til



jeg har en Graupner mz24 radio og den del Hott modtagere



jeg har købt min en powerbox srs Igyro som kan køre sammen med denne via SumD bussen men hvordan jeg kan ikke få kontakt imellem de 2 enheder er der nogle af jer der har en ide





Graupner og SMUD bussen

side by side Kubota

Looking at a Kubota RTV 500. Anyone have any experience with that VHT transmission in that thing



side by side Kubota

Så har man travlt ;-)

jeudi 18 septembre 2014

Der var i går onsdag var landsdækkende fartkontrol, her i hele tyskland, som var varslet i både tv, og aviser.

Alligevel snuppede de en med 238 kmt. I en 100 kmt. Zone.

De nævnte dog intet om zonen var på motorvej, eller alm. Landevej.

Så han må ta bussen, de næste 2år. He he.....





Så har man travlt ;-)

I may have just dealt with my last horse customer

I don't know what the hell is wrong with these people. Most of them are really inconsiderate and dumber than a fence post and the rest of them can't even write a check that won't bounce.

Last week one writes me a check for $800 and bounces it. I went back to her explaining the check bounced. My bank just mails me the check back but it takes 8 days. Meantime I wrote checks on that check. Then she writes me another check with the wrong company name on it. Are you kidding me?

Next genius calls me yesterday and we agree on a price for me to deliver 2 loads of round bales (30) to her this Saturday. I load the trailer tonight and strap it all down, then she texts me an hour ago and tells me she needs to wait 2-3 weeks. I'm like WTF kind of way is that to screw a farmer? At least have the balls to call me and tell me you're gonna waste my time and fuel to screw me.

Then there's the one who calls me Tuesday and we make a deal of $40/bale on 50 bales because he wanted "all natural" hay, which I actually do have 50 bales of. He asks me to call him tonight and I do. He tells me since we talked, he "found same size bales stored inside for $30/ each". I'm like, how does anyone produce and store 4x5 RBs inside for $30/ea.

All are horse people. Well, damn near all of em can kiss my sweaty ass. I can't take them anymore.

Cattle and mushroom people, yeah, they're OK. Horse people? He'll with em.

Sorry for rant. I'm pissed!!!



I may have just dealt with my last horse customer

Server issues ...

same ole server issue. appears to be a memory leak. added 2 gigs of memory early today but still had the issue.

Either httpd or mysqld is the root cause, I think. Not sure. Either way when server gets real busy it causes database issues and errors. I've had to repair all databases ...with my hotspot from my phone. Got home from work and damn if my cable modem would not work. appears it's fried. when it rains it pours.

We are good for now but the issue is not solved. Working on getting to the bottom of it but unfortunately I do not have it totaly figured out yet. sorry.





Server issues ...

Educate me on carted wheel rakes

I have never run any rakes other than NH rolabar breaks with a hydraulic bridge hitch. It works but we are getting bigger every year and are going to need to get another set. I have some guys we buy from that just bought an H&S 12 wheel rake with the kicker wheel. Said he loves it. We bale roughly 30,000 bales and run two older NH balers. One with an 18 bale accumulator and one with a pan thrower. Would this be ok for size or should I consider stepping it down a little bit. I cannot justify $25k for rotary setup and I need to be able to take 2ton first cutting without overloading the balers. Also can you adjust the width of the windrows coming out the back? What if you need to flip the row over the following day? Is that feasible? I have lots more questions, but will start with the basics. TIA



Educate me on carted wheel rakes

El-udstyr til en 3 m DG-808

http://ift.tt/1mhDelJ



Jeg har fundet denne model hos en forhandler i Tyskland til € 299,- plus fragt.



Den er lidt dyrere end hos Hobbyking, men hos dem er den desværre udsolgt, og da der ingen udsigt er til, at den kommer på lager igen foreløbigt hos dem, har jeg så besluttet at købe den i Tyskland, selvom den koster lidt mere..



Jeg er desværre så utålmodig, at når jeg har besluttet at købe en ting, så vil jeg helst have den dagen før jeg bestiller den, og det koster jo lidt extra nogle gange :D . . .



Men nu til spørgsmålet:



Den skal hovedsaligt bruges til skrænt-flyvning, som jeg gjorde lidt i, sammen med nu afdøde Kjeld Sørensen, som en del herinde nok kan huske, men jeg vil også gerne have en elmotor i snuden, så den kan bruges til termik-flyvning, uden at skulle bruge slæbefly eller wire-højstart.



Hvad motor og udstyr skal man vælge, herunder batteri, propeller og fartregulator ?



Jeg snusede lige til El-flyvning for 25 år siden, men det var begrænset hvad det blev til, da udstyret dengang, ikke var ligefrem opløftende, hverken på prisen, eller på udbuddet og virkningsgraden af udstyret, så jeg må betragtes som total grøn på området, og jeg vil med taknemlighed tage alle gode råd til mig...



Jeg behøver ikke en raket, der kan starte lodret, blot en motor der kan få denne lille 3 m DG-808 op i 50 m højde på en rimelig tid, gerne nogle gange i træk, hvis det kniber med at finde termik, uden at skulle skifte batteri....





El-udstyr til en 3 m DG-808

Sælges: Hitec optic6, Corona modtager, t-rex 500 frame, motor + esc

Hitec6 35 MhZ sender, Corona 6 kanals modtager sælges + T-rex 500 frame, halebom, canoby, Align brushless motor (RCM-BL500L) og Hype 60A speed controller.



Har ingen ide om hvad det skal koste, så jeg er åben for fornuftige bud:-)














Sælges: Hitec optic6, Corona modtager, t-rex 500 frame, motor + esc

Blue Phoenix med aftagelig motor?

Kender i det at man lige sidder og får den her idé...men ikke rigtig ved hvordan den skal udføres.:-)

Så er det jo rart at man har et forum,hvor det summer med klogskab..😄😜

Min idé går ud på at lave en combi Phoenix...med og uden el motor.

Men det skal være nemt at udskifte.

Måske kan man endda montere snuden(som naturligt bliver skåret af) når man afmontere motoren igen.



Umuligt...?..nej vel..



Kan det lade sig gøre?....Der må brainstormes...😄...








Blue Phoenix med aftagelig motor?

**Sælges** Futaba T8J

Jeg sælger min Futaba t8j 8 kanal, den er kun blevet brugt 10 gange max, med andre ord den er helt ny.



Pris 1300 kr.-



Hvis du også søger en tre-x 450 pro fbl, så sælger jeg også én.



Link: http://ift.tt/XprEc5



Billeder af senderen: http://ift.tt/1u4k0lP





**Sælges** Futaba T8J

What Year Model for New VIN?

Hi All,



Newbie here, and I'm searching for an 1100 for our ranch in New Mexico and going hunting occasionally .



The state is very anal about the way they require RTV's to be titled/registered. They require a title from another state for titling used vehicles brought in to NM. Many states don't title RTV's, and many states do title but don't register. I've gotten that far; Texas is that way (kinda).



Since they (NM) require a previous title, in what year did Kubota start putting 'real' VINs on RTVs? In other words, the 17-digit number versus the old 16-digit number. I've narrowed it down to 2008 or 2009.



Thanks !





What Year Model for New VIN?

multiplex funcup

http://ift.tt/XnWRfY





er det noget der er noget ved??



nu har jeg fløjet multirotor, wing, og motor svæver i et stykke tid, men nu mangler jeg sgu en flyver med hjul, jeg har altid godt kunne lide at starte og lande:D



jeg har et flok 35/36 1000kv motorer i overskud, mon ikke en af dem kunne anvendes i såen en? :)



men hvad met batt. de skriver at der skal en 3s 2000mah i, men er der ikke plads til en størrer 3s? :rolleyes:



hilsen kent;)





multiplex funcup