I've had my RTV x1100c for a few months now and I love it. I finally got around to adding some LED light bars. I searched quite a bit and found tons of different types, sizes, and mounting concepts from other people. I went with a 42" led (I think 960 W) on the front and two 4" floods (I think 54 W a piece) on the back. All came from Ebay. Some guys at work helped me with a mount for the front led. We came up with more of an "L" shape bracket that we bent to kind of conform to the curve of the roof to get the led low. I wasn't wanting to increase the overall height of the unit too much with the light and if I ever got into a clearance problem I wasn't wanting to rip the light off. I'll get some more close ups later on of the mount.
I bought a pack of illuminated rocker switches from Ebay and put them in the switch panel just below the radio. They work great. I didn't get any wiring kits or anything from Kubota so I cut off the molex type connectors and added my own connectors to attach to my switches and lights. Not too big of an issue to do. Also, the rear lights are only prewired to the back left mount so I put in some jumper wires to get power to the right side.
Since I took these pictures I had one of the floods cause me a tons of headaches by blowing fuses left and right. Short story, there was some sort of grounding issue with that particular light so I threw it away. I had two extra 4" spot lights from a previous project and decided to add them too. So for the moment I have the left side with one flood and one spot 4" led and the right has one spot 4" led. I'll have to get some pictures of that later on.
If you have any questions of what I did let me know and I'll do my best to answer them.
I bought a pack of illuminated rocker switches from Ebay and put them in the switch panel just below the radio. They work great. I didn't get any wiring kits or anything from Kubota so I cut off the molex type connectors and added my own connectors to attach to my switches and lights. Not too big of an issue to do. Also, the rear lights are only prewired to the back left mount so I put in some jumper wires to get power to the right side.
Since I took these pictures I had one of the floods cause me a tons of headaches by blowing fuses left and right. Short story, there was some sort of grounding issue with that particular light so I threw it away. I had two extra 4" spot lights from a previous project and decided to add them too. So for the moment I have the left side with one flood and one spot 4" led and the right has one spot 4" led. I'll have to get some pictures of that later on.
If you have any questions of what I did let me know and I'll do my best to answer them.
Kubota RTV x1100c LED Light Bar
0 commentaires:
Enregistrer un commentaire