electrical question NH 1069 alt

samedi 31 janvier 2015

I have to have hooked up a wire in the wrong position.

On the back of the alternator there are six lugs. I know the three on the right (neg) side are correct, and the big positive cannot go anywhere else. The other two wires have to be wrong.

can someone explain to me in plain english what all of the lugs are for? There is also a seperate regulator on the frame, for whatthat is worth.

I started it today after getting it wired back up, it appeared to be over charging. When I turned the key off it continued to run and I had to stall it to kill it.



electrical question NH 1069 alt

Deere 348 Questions

Doing a little window shopping over at tractorhouse and relatively speaking they're many more JD 348 balers for sale than the 338 or 328 models. Some of the 348’s look in great condition, but their prices are really not much higher than the 328 or 338 models and in some cases lower. Wondering why? Is it that larger farm operations are trading in their 348 balers sooner rather than risk a downed baler in the middle of haying season? Are these 348 used balers typically wore out from commercial use when they come on the market?



No more hay than we'd ever make would justify a new 348 - but if one was in the market for a used baler and a 348 could be had for the same price as a 338 or 328, same shape, any reason not to buy the 348? In my case, the max PTO hp I've got to work with is 50 and the minimum is 38. Deere says the min hp for the 348 is 35, but I'd think if you were to feed the 348 to capacity, it could bring a smaller hp tractor to its knees? So if hp is a potential limit to maximizing capacity of the 348, then what is the downside to running them at a lower capacity like a 328? Will the 348 make a consistent bale at lower feed rates?



One of these days I'd like to find a deal on a 338, but if a deal came up on a 348, I'd want to know if - with the limited hp I have to work with, I should buy the 348 and be able to make some decent bales.



Just curious.



Thanks,

Bill



Deere 348 Questions

Oxai Axiome kunstflyver

Motor: YS 175 CDI

Servoer:

Sideror: Futaba BLS 451

Gas: Futaba 3150

Krængeror: Futaba 9551

Højderor: Futaba

Kontakt: Emcotec DPSI micro





Pris: 14.500 kr.





Oxai Axiome kunstflyver

3D Trinity





Komplet flyveklar, dog uden modtager.



Motor: OS 50 SX (med stempelring)

Servoer: Futaba 3001



Pris: 1.450 kr.





3D Trinity

PC oscilloskop sælges.

Det drejer sig om et Velleman EDU09.

Specifikationerne kan ses på hjemmesiden

Prisen er Kr 200 plus levering.



Henvendelse her, på PM eller Tlf 50 43 90 32.








PC oscilloskop sælges.

KØBES BRUGT PHOENIX SIMUlATOR

Med eller uden kabel og til en god pris.









Hilsen



Jakob Munk





KØBES BRUGT PHOENIX SIMUlATOR

balancer

er der nogen der har en Lba10 net balancer





balancer

KØBES: E-flite optrækkelig landingsstel

Hejsa.

Hvis nogen har et E-flite landingsstel, der passer til en Parkzone T-28 Trojan til overs, vil jeg gerne købe det.

Har set modificeringen på FliteTest.

*Skulle have være placeret under "Købes". Beklager.

Venlig hilsen

Lars Michael





KØBES: E-flite optrækkelig landingsstel

Black Hourse modeller

Er der nogen som kan sige om black Hourse modeller som leveres med optrækkelig understell er noget som ikke holder i længde. Har læste omkring at slanger ikke er tætte bør udskiftes til nye, understellet ruster bare det ser næsten en vanddråbe osv. Nogen har jeg læst om at man skal udskifte det til et andet fabrikat. Osv.

Men når man læse på Black hoursenhjemmevside er de i udvikling med nye tiltag lige på dette med understellet. Men selvste modellen er vist nok godt nok lavet og udført fra fabrikken af.

Men hvis dette kun har været enkelt tilfælde og det er blevet meget bedre ville jeg spørge om der er nogen herinde som kan sige om dette er sandfærdigt eller modellerne er i orden.





Black Hourse modeller

Brugte combat modeller bortgives

Hej Folkens



Jeg skal have ryddet op i værkstedet og lavet plads til den kommende sæsons grej :)



Jeg har en del lettere "brugte" (læs skadet) F2D kampflyvnings modeller til at stå - nogle har endda kun været brugt i en halv kamp...:rolleyes:

Hvis man gider bruge tiden op at lappe den kan de blive nogle fine modeller, man kunne evt ombygge dem til diesel eller el.



(skader er knækkede bagkant, knuste ribber samt skader i mylaren).



Jeg har gennem året valgt at gemme modeller jeg ellers ville have smidt ud, pga krisen i ukraine (modellernes hjemland), men det har vist sig ikke at være et problem.

En anden grunden til at jeg ikke gider at bruge tid på at lappe dem selv er at jeg skifter til en anden modeltype i år.



Som det ses i overskriften er prisen i et leje hvor alle kan være med, hvis du er intresseret kan de afhentes i kgs. lyngby inden d. 8/2 - 2015



pris: gratis ved afhentning.

kan ikke sendes



billeder kommer...



\zik zak





Brugte combat modeller bortgives

CK25 hst creeps

vendredi 30 janvier 2015

I've had my 2004 CK 25 for a couple of months. When I take my foot off the pedal the tractor often keeps creeping forward. It's very slow, but moving. This week it has started doing the same when backing up. Usually a tap on the other end of the pedal stops it.



Any idea how to fix this?



Thanks,

Jason





CK25 hst creeps

Don't Shoot!!! I've gone to the dark side.

Someone offered me some decent money for my trusty old RTV and I took it. :bonk: I started searching and wound up with a newer gator diesel. I had an old 6x4 before the RTV and it was a great machine, so I figured I'd try it again. I wouldn't have bought it if the deal wasn't right...but I wound up with a machine that looks and runs great with extra money in my pocket in the end. I'm still here for my .02, so don't count me out yet. I still buy and sell the orange ones when I can find them, just don't have one in my own stable. I'll still help when I can! Here's my new machine. 850d, winch, cab, plow, electric bed, 400hrs etc.... I very much appreciate all of the help everyone here is, you all have no idea how much it helps! Keep up the good work!



Attachment 8963

Attachment 8964

Attachment 8965

:letitsnow:




Attached Images













File Type: jpg image3.jpg (86.5 KB)
File Type: jpg image5.jpg (75.4 KB)
File Type: jpg IMG_1530.JPG (116.8 KB)







Don't Shoot!!! I've gone to the dark side.

Newbie just bought 2010 rtv900...

howdy all!

going to pick up my new to me 2010 camo rtv900 today.

just spent $9500 on it, I hope that wasn't too much.

the thing is loaded with hard cab, high rise filter, gun racks inside and out,

only 155 hours, winch, lights all around, windshield wipers on both sides.

filters say they were changed at 144 hours.



I've been reading a bunch of the threads here and look forward to all the help

you folks have to offer.



my first question is...were there any changes on this model from earlier ones?

any accessories that are a must?

any quirks with this model I should know about?

I don't have a manual for it yet so can anyone tell me when and what the next

major service is?



will post pictures for everyone over the weekend. never done that on this site,

anything I need to know?



thanks in advance for all your help!

ciao





Newbie just bought 2010 rtv900...

En eller anden ?... og så lidt tak ..

Hej alle i luften. . Hvis nu valget stod mellem en umx carbon cub eller en super cub s .sådan til lidt bask i baghaven Ell. parken hva skulle jeg så vælge . Hvilken er den mest holdbare og vind-duelige😃😃



er ellers kommet igang m at flyve med Apprentice, har Været heldig at ha en hærdet flyver in the hood, så maiden voyage gik uden tåre, tak til Ole og hans rettidige indgriben ,og en tak til alle advarslerne herinde fra, ellers havde jeg sgu aldrig banket på den dør...





En eller anden ?... og så lidt tak ..

MB Hobby

Under invitationer - Pilottræf i Risskov. Omtales at der kommer flere forhandlere og een af dem skulle være MB Hobby som skulle være en helt nystartet, og hjemhørende i det

sydlige Danmark - Interesant for mig, idet jeg bor i denne del af landet - Men, der er et men, jeg har endnu ikke hørt om denne forhandler . . . Googlet på navnet - uden held.

Er der mon én eller anden her på Forum som har mere konkrete oplysninger ang. denne forhandler ?

Mvh. Søren





MB Hobby

Spectrum AR636 med AS3X købes

Spectrum AR636 modtager med AS3X købes



pm eller 24480030





Spectrum AR636 med AS3X købes

Drone Field Photography

My oldest son is a photographer. He has recently expanded into drone photography. Have anyone used this method for analysis of fields from the air?






Drone Field Photography

JetTronic Bremse ventil

Jeg har en JetTronic Proportional bremse ventil i overskud.

Som ny - kun brugt nogle få gange.

http://ift.tt/1LpsHOr



Pris 500 kr. incl. fragt



/Rasmus





JetTronic Bremse ventil

Work light ?

jeudi 29 janvier 2015

I think I read a thread that someone mentioned their work lights were led, part flood and part spot bulbs? If someone knows the thread or what lights they we're let me know



ETA: For an RTV





Work light ?

Massey Ferguson 4253

ok so im working on a MF 4253 tractor, and it shuts downs at high RPM, Also the tractor wouldn't shutdown when you turned the key off, we picked some tiny rubber pieces out of the the solenoid hole in the fuel pump and we put the solenoid back, and that fixed the problem of it not shutting down. I don't know if the rubber pieces have anything to do with it shutting down at High RPMs or not.



if you know of anything that will help, that would be great.





Massey Ferguson 4253

What Crazy Thing Did You Do Growing Up On The Farm

With the topic of safety of kids on atv's, what did you do that would be common place growing up that would be frowned upon now and maybe considered stupid looking back on it. Two common ones I think of would be riding in back of pickups and riding on fenders which my kids do. My cousin and I used to ride in the front of the chopper box behind the chopper. Corn cobs hurt a little when they hit you in the face.






What Crazy Thing Did You Do Growing Up On The Farm

Blade multirotor

Jeg har en Blade Quad-Copter med as3x stabilisering, den er så god som ny, har kun fløjet få ture indendørs.

Sælges med ekstra 500 mA batteri batteri, komplet med lader.

Pris: 350,- + plus fragt





Blade multirotor

1986 case ih 3640

i am looking at buying a new round roller this year and have been looking at a 1986 case ih 3640. says it makes a 4x5 1/2. does anyone have any experience with these balers? does anyone know if the come with a monitor? as always any advise is appreciated.






1986 case ih 3640

trex 600 landings stel mål

Er der en venlig sjæl med en t-Rex 600 der vil måle bredden på landing gear for mig?

Søger målet fra Midt hul til Midt hul til skidpipe

På forhånd tak





trex 600 landings stel mål

Mangler 4 bladet prop

Nogen der har noget 4 bladet liggende. 15" og 20-22" har interesse..





Mangler 4 bladet prop

Propel "BIELA" 16x8

BIELA kulfiber propel 16x8 sælges for 125,-Kr. + evt. forsendelse.



Er købt for 2 måneder siden og har aldrig været brugt.



Sælges grundet fejlkøb (Skulle bruge "Turbo" udgaven i stedet).





Propel "BIELA" 16x8

Modelfly Udstilling 22 Februar.

Søndag den 22. februar 2014

kl. 10.00 - 15.00

Lindeskovskolen, Lindevænget 1.

Nykøbing Falster





Modelflyveklubben Hangar 4800 holder Modelfly udstilling.



Klubbens medlemmer, samt gæster fra alle klubber på Lolland Falster, udstiller deres forskellige modelfly.



Der vil være loppemarked og forhandler, der bliver solgt pølser og drikkevare til fornuftige priser.

Der er gratis adgang.





Modelfly Udstilling 22 Februar.

bale basket

I bought a Forage King bale basket but I can't get my bales light enough. It takes so much pressure to push the bales up the chute that even with all the tension off the bale,the bales are too heavy to deal with. Anyone know a remedy to this ?






bale basket

Boomerang Sprint

Komplet flyveklar. Dog uden turbine og modtager. Billede og nærmere beskrivelse følger.



Pris 9.000





Boomerang Sprint

Tegning Flair Fokker D -VII

Skulle der være en der har en sådan tegning liggende.

Så ville jeg være yderst taknemlig.





Tegning Flair Fokker D -VII

GAME: The Make A Sentence Game

Stealing this from Net Cooking Talk. It's a little different, I think you'll like it.

Here's how it works:

At first, take a single word like



Cookoff



then next one creates new sentence, using every letter of that word like



Candy Only Occansionally Knocked On Forums Forums.



Next one creates new sentence using letters of the last word in the previous sentence.



FORUMS




and so on.



Let me start:



first word will be FORUMS



FORUMS (copy or type this word over your sentence, this will help a lot at page breaks)





GAME: The Make A Sentence Game

ATV Safety Tips - Dangerous for kids

I recently attended a course on general safety and tractor maintenance from Texas Ag Center in Harris County Texas.



My takeaways were as follows:



1. Whether farming and ranching is a full time occupation or weekend warrior, statistically agriculture is the most dangerous of occupations

2. As the speaker was talking about all the potential danger areas of agriculture, I started counting the times I had done exactly

what he was mentioning to where I almost ran out of fingers!

3. Slowing down would help prevent injuries

4. Letting friends and family know where you are working

5. Find the county plot number for your land therefore emergency vehicles can find your place

6. Pushing down on a auger can be dangerous

7. PTO shafts are dangerous. (Stop the PTO shaft before getting off the tractor)

8. Operating a shredder and jumping off a tractor while moving to avoid being stung by bees. Stop the tractor for your not going

to outrun the shredder.

9. Animals - why? Because we treat them as pets over treating them as animals! One of my longhorns took me down.

10. ATV's are extremely dangerous vehicles especially when operated by kids. The number one reason they are so dangerous

for kids is the ATF vehicle is power is not match for the age of the child. The safest move is not allowing a child or teen or

young operate an ATV! The statistics in the link below are eye opening...



http://ift.tt/1zgqjDe



http://ift.tt/1pYWcuJ



Many many more ways to be injured out there! Please research ATV's and think twice about there use!





Be safe!



Mark



ATV Safety Tips - Dangerous for kids

pto prblems

I have a 2009 Kioti ck30 and the lever that engages the pto is stuck about halfway between the engage and disengage position and will not move, does anybody have any suggestions on where the problem might be.





pto prblems

K: Overvejer du at lægge modelflyvning på hylden?

Hvis du går og overvejer at stoppe har jeg interesse i større samlinger. Som udgangspunkt imellem 10.000 - 500.000 kr.



Da jeg kun flyver El og benzin skal det primært være disse typer fly.





K: Overvejer du at lægge modelflyvning på hylden?

They should make kicker wheels for rotary rakes!

mercredi 28 janvier 2015

I don't see why the don't make powered kicker wheels for center delivery rotary rakes like the vermeer r2800 has. I believe they would sell a lot more center delivery rakes if they had kickers. Is there any reason they don't? Hoping Krone1 might comment on this.



They should make kicker wheels for rotary rakes!

Inline bale thrower distance indicator?

I put a case 8511 bale thrower with electric controls on my mf 1837, it bolted up just fine. It doesn't have a bale thrower distance indicator like the NH or JD bale throwers so you can tell how far it's throwing. Seems like it will be hard to judge without a indicator where the bales are going to go. For those of you that have used bale throwers how important is the indicator? I think I can fab one up, but don't wanna go through the trouble if it's not really needed. Thanks!!



Inline bale thrower distance indicator?

Will this winch work for my Kubota RTV500?

Hi. I'm new to the forum and as a RTV owner. I just received a RTV500 as a present from my wife, and I've bought a Viper 4000 lb. winch for it. It comes with everything I need to install it but I'm not sure if the mounting plate is compatible. It is a universal 4 bolt 3 x 4.88. Any help will be much appreciated.





Will this winch work for my Kubota RTV500?

January of all months.

Until today I had never cleaned corrals or done dirtwork in January.

We woke up this morning to a steady drizzle of rain and a forecast of high 40's. The rain tapered off and I was looking for a project so on a whim I started cleaning corrals. It worked well and went quick.

I got ambitious and fired up the dozer thinking I would kill a few hours shoving dirt around. I have been working on leveling off a hill for a place to set my round pen up. There was no frost in the ground at all. I was pretty amazed to say the least. We have had several weeks of above average temperature but this is rediculous.



January of all months.

x900 extended warranty

Guys what is your opinion on getting an extended warranty on the new models of the rtv? My warranty expires in April, received a card today from Kubota asking me if I want to extend the warranty. Don't know how much a 2 year extension would cost, I have to contact the dealer for that.



Thanks for your opinion in advance.





x900 extended warranty

Pilotmøde for helikopterpiloter 1. marts.

Pilot møde 2014 søndag 1 marts kl 10.

Så er det atter tid til pilot møde hos Søren Østergaard.



En super hyggelig måde at starte sæsonen på. Alle er meget velkomne, uanset om du har tænkt dig at flyve med i konkurrencerne eller bare vil se med og lære på den måde.

Vi får endelig styr på årets kalender, og reglerne for både F3C og F3N gennemgås. Endvidere vil der være en detaljeret gennemgang af manøvrer der kan være tvivl om.



Til folk der ikke tidligere har været hos Søren er adressen her...

Bindeballevej 78

7183 Randbøl



Tag endelig dine modeller med, så vi kan se hvad folk har klar af spændende grej til den kommende sæson.

Der er jo intet som en flok nøgne helikoptere til igen at vække flyveinteressen til live :-)



Hvis vejret er med os får vi også fløjet lidt.



Af hensyn til os Sjællændere, starter vi 'først' klokken 10



Pilotmødet er nu på som første punkt på årets kalender, så nu er vi "lidt i gang"... LINK



Vel mødt :D





Pilotmøde for helikopterpiloter 1. marts.

De er morsomme hver gang :D






De er morsomme hver gang :D

Best baler parts

Anyone ordered parts from Best baler parts lately. I can't get them to return my calls.






Best baler parts

k; tegninger

Hej er da nogen da har byge tegninger til decathlon , citabria eller piper på 200-250 cm i spænd?





k; tegninger

Futaba 14SG sælges

Futaba 14SG SÆLGES

3 modtager + extra LiFI 2100mAh transmitter pack

R7008SB pakket ind i krymp.

FrSky Delta 8

R6008HS



Antennen er lidt løs, men uden betydning



Skriv PM





http://ift.tt/1y5MwBf





Futaba 14SG sælges

Nyhedernes tid

Hej

Nyt fra Spektrum: http://ift.tt/1v3GDcj



mvh

ibp





Nyhedernes tid

MF35x 3cyl Perkins

mardi 27 janvier 2015

Hi all



My 35x has just started to rev randomly, like it's sucking air into the fuel system. I've bleed the fuel system a couple of times and she runs well for a while but then surges or over revs again.

Have tightened all fuel lines etc but still doing it. Not sure what to do.



Any advice would be appreciated.





MF35x 3cyl Perkins

Is this normal???

Thought I'd pop the top off the transfer/hyd fill an d there was a piece of aluminum mesh folded up inside. just resting over fill opening. Is this a screen for the fill and how is it to attach?





Is this normal???

PTO speed Massey 275

Hi ! I am a new user . I have a MF 275 with multi power trans . If I use low range in the transfer case ( no the low range multi power ) the pto seems to turn slower .. Is this normal and if not what could be the problem .. thanks





PTO speed Massey 275

Drøn på!

God måde.....

Fik lige denne nyhed fra en ven fra klubben...



http://ift.tt/1uyXQEA



Jeg tror at jeg hopper på, så slipper jeg for de 4 AAA endeloop celler jeg bruger.

Altid godt at have lidt sikkerhed med sig.



tak for info Kim ;)





God måde.....

Can a 4600 cab be put on a 5600

I would like to know if you can put a cab from another series tractor (4600 or 6600) on a 5600, or even a 5600 cab on 5600 that does not have a cab.





Can a 4600 cab be put on a 5600

Er din klub medlem af DGI - se Jeres klub-forsikringer her

http://ift.tt/1CvS25a



Se den grønne firkant til venstre på siden.





Er din klub medlem af DGI - se Jeres klub-forsikringer her

søges 12-16kg turbine

Hejsa



Jeg søger en 12-16 kg turbine. Helst Simjet eller Jetcat.

Skriv hvis du har noget du vil sælge.



Mvh

Rasmus Glad

AMC





søges 12-16kg turbine

rtv 2006 900

quick connect hydro gpm ?





rtv 2006 900

rtv 2006 900

does anyone the gallons per minute on a 2006 rtv 900 dump box quick connects?





rtv 2006 900

KØBES! Tom model til 28cc benziner.

Hej..



Jeg har sådan en motor og servoer liggende, og jeg leder efter en til model som det passer i!



Skriv gerne hvis der skulle være en der har noget stående :)



Obs! Kun 3D flyvere har interesse..



Skriv eller ring gerne på 53704903





KØBES! Tom model til 28cc benziner.

Min sender forstår mig ikke.

Multiplex Royal pro 16.

Har forsøgt at lægge en ny model ind. MPX Blizzard.

Da jeg skulle binde modtageren gik det galt.:D:D:D

I stedet for at læse manualen trykkede jeg på den knap jeg troede jeg skulle bruge.

Når senderen tændes vises SX 16 i display og derefter Servo Monitor med

kanal numre og % satser.

Led lyser ikke. Når styrepinde aktiveres lyser led konstant.

Kan også bruge rækken med de seks hovedmenuer.



Hvordan kommer jeg videre.



Hilsen hjhj



2398 9352





Min sender forstår mig ikke.

Cool way to hunt my 1100

Having this built - lightweight and two people can remove and set up. No hydrolics - goes up to 14 feet off ground and very stable. Gets me above the brush in south texas to hunt - I have a video of it in action but could not get it to post




Attached Images





File Type: jpeg IMG_4419.jpeg (118.8 KB)







Cool way to hunt my 1100

goblin 380

hejsa

så skal der bygges :)

mvh





goblin 380

Old Style RTV Transmission Filter Change

lundi 26 janvier 2015

I got my RTV 900 filter kit and 5 gallons of sudt2. Opened up the box and realized that the old orange rear filter has been replaced by a white one. Just to make sure, I called the dealer that shipped it to me and they said the orange one has been discontinued...To satisfy myself, I put them side by side and looked at the interior and all seems the same... gonna miss that old orange filter ..LOL

These are a couple of pictures of the filters... also got the rebate info sent off so I can get that $ back.

I cleaned off the magnetic plug and that is what can be seen on the paper towel. Newbies, always remember to make sure that the plug's gasket doesn't come off in the draining process.

I finished my transmission change then greased the rear ujoints- (It really helps to have the rear tires off but can still be done. Time to change the engine oil tomorrow- if the cows cooperate.

The pictures won't upload will try again tomorrow.





Old Style RTV Transmission Filter Change

Auction time

Has anyone bought anything on tractor house "auction time"



Auction time

LB1914 Stuck in 1st gear

I have a Kioti LB1914 and the transmission is stuck in 1st gear.

has been working fine with no problems. Was using the tractor and went to shift gears and it won't shift.

Is it as easy as poping the top of the tranny and moving it by hand, or could it be something else.

Did not make any grinding sounds, has plenty of oil.

The Shift lever moves a little bit but not enough to shift.

Could something just have come loose.

Thanks Jim





LB1914 Stuck in 1st gear

john deere 725 loader

Does anyone know where one might be for sale. Doesn't seem to be any in my area. Looking to put it on a 4000 series tractor.



john deere 725 loader

funjet ultra købes

er der nogen der har en funjet ultra liggende som du ikke får bygget ? er kun int. i et nyt kit eller en tom model der ikke er total hærget.



pm eller 24480030





funjet ultra købes

Robbe SF 36L

Motorsvæver fra Robbe. Har du sådan en liggende du vil sælge, der ikke er alt for kvæstet så giv lyd.



Link til modellen:

http://ift.tt/15CWylp





Robbe SF 36L

Købes: trex 250 rotorhoved FB.

er der nogen der ligger inde med stumper til rex 250 m. flybar og rem træk kunne jeg godt være int.(alt har int. osse evt en hel heli gerne uden elektronik)

Bare skriv her eller nemmere : send sms til 40118863

VH.





Købes: trex 250 rotorhoved FB.

vedr modelflyver til 14 årig.

Hej,



Jeg ønsker at give min 14 årige dreng en modelflyver, men det skal være en overraskelse, da han er begyndt at interessere sig rigtig meget for det.



Er der nogle der har nogle gode idéer til, hvad der vil være et hit for en 14 årig og også noget der er godt at starte op med.



Håber I kan hjælpe :-)










vedr modelflyver til 14 årig.

Gas pind i bund på phantom 2

Hvad sker der hvis du har gas pinden i bund i mere end 3 sek under flyvning på en phantom 2??





Gas pind i bund på phantom 2

RC-Sommerlejr 2015 Uge 29

Halløj alle danske model flyve piloter!



Så tør vi godt gøre det officielt. Sommerlejr 2015 uge 29, bliver i centrum af Skagen! Det var faktisk slet ikke meningen det skulle ha været i Skagen før 2016, men de andre planer for 2015 kunne ikke gennemføres.

Så for at vi ikke skulle være uden sommerlejr i uge 29 er Skagen RC hoppet til i sidste øjeblik.

Dog er der lidt problemer, da vi jo er lidt sent ude, så kan vi ikke få skolen i weekenden uge 28. Det betyder at vi bliver nød til at starte et par dage senere i år end vi plejer. Jeg håber det er ok da vi har prøvet alt for at få skolen noget før. Faktisk var den booket til og med tirsdag, men de er gået med til at vi kan få pladsen allerede mandag morgen.

DVS at pladsen åbner Mandag den 13-07-2015 kl 12:00 (Måske lidt før hvis vi kan få sat strøm, båse mm. op hurtigt). Så kan i blive helt til søndag eftermiddag hvis i vil :-)



Sommerlejren kommer til at foregå på den helt gamle skole vi var på i 2012 og for mange år siden i midten af Skagen, nemlig Ankermedets Skole (Skagen skolen).

Camping skal forgå på boldbanen der er afgrænset af løbebanen. Telte mm kan ligge i hjørnerne lige uden for løbebanen hvis de ønsker det.



Flyvningen bliver på Skagen RC plads ca. 5 min fra skolen.

Den ligger på for enden af Buttervej, 9990 Skagen.



De fleste kender jo Skagen og alle de ting der er i området.

Dejlige bade strande, masser for familien at hygge sig med.

I uge 29 er der også træf på toppen så der vil nok være en motorcykel eller 2 i byen også man kan kigge på ;-)



Pga. Skagen er en lille klub og vi har begrænset plads at ligge på. Samt erfaringen siger der er mange der gerne vil til Skagen i Uge 29. Så vil vi til en start sige max 60 enheder indtil vi har styr på brandplan mm.

Men lad os nu se, for får vi godkend den samme brandplan som sidst så kan vi godt få plads til flere. (Sidst i 2012 fik vi plads til alle).



Det bliver i afslappet tempo som de sidste par år. Opskriften bliver som sidst da vi var i Skagen.

dvs. der bliver som sidst fællesrum med musik og bar. Det vil være åben om aftenen og det ligger IKKE ligge op og ned af campingpladsen men inde i et lokale på skolen. Så der kan hygges med musik uden at genere pladsen.



Ud over dette er der kommet et nyt kæmpe overdækket område som ligger lige op af campen. Det regner vi lidt med bliver grillplads og samlested for en ryste sammen aften mandag aften som vi plejer. Man kan bruge det som samle punkt og grill plads hele ugen hvis man ønsker at sidde tørt, hvis der kommer lidt dug sidst på aftenen.



Vi regner med normal sommerlejr program. grillaften mandag, Pige aften tirsdag, 2m golf onsdag. Dog bliver der kun konkurrence på flyvepladsen 2 gange i løbet af ugen, så der bliver lidt mere plads til hygge. Men der bliver Fly for Fun/Alvor og hangarskib, samt en kæmpe flamingojagt. Evt. kampflyvning/rævejagt. Andre ideer modtages gerne! :-)



Der vil være mulighed for at flyve med mindre el park fly/indoor, køre med fjernstyret biler mm. på græs arealet der ligger lige nord øst for camping området. (Kort kommer hurtigst muligt.)



Som sidst bliver der også en Hal til Hangar man kan køre til og fra.



Skagen centrum ligger 5 min gang der fra og der er MASSER af indkøbs-muligheder mm.

Vi regner med internet på camping området, samt evt. ved baren.



Så alt i alt mulighed for at fantastisk sommerlejr! Og husk solen skinner ALTID i skagen!



www.rc-sommerlejr.dk webside bliver meget snart åben for tilmeldinger og vil blive opdateret med info hurtigst muligt.



Ang. priser, så bliver det som sidst i Skagen nemlig 0-4år Gratis!.... 5-12år 40kr..... 13-99år 75kr .

Selv om vores pris til kommunen er steget en hel del mener vi godt det kan løbe rundt.

Drikkevare bliver som sidst billige! 5kr for øl og vand.



Vi holder jer opdateret med nyt efterhånden som det sker.





RC-Sommerlejr 2015 Uge 29

Whose running a NH 419 durabine heads?

Just wondering what people thoughts are on new holland 19ft disc fronts? Any problems and they take a lot of hp to run? I have a hw340 here in australia I'd say it would have trouble running a head that size?



Whose running a NH 419 durabine heads?

JD14 cylinder missing - sometimes

dimanche 25 janvier 2015

I have a JD 14 that has a nearly new Honda GX690 engine. Yesterday it started running rough. After a bit of testing I figured out one spark plug wasn't firing. As I was tinkering it started running properly and ran fine until I worked for about a half hour today. All of a sudden it started running on one cylider again. A few minutes later it went back to running smooth. I checked the spark plug wire and it appears to be connected correctly.



Any ideas?



Thanks in advance.





JD14 cylinder missing - sometimes

2010 RTV 900 work lights

I purchased 2 front and 2 rear work lights from Kubota installed everything the only thing left to do is to find the plugs to power the lights.The instructions say the plugs are located in front of the battery under the e brake handle I was not able to find the plugs are they inside the main harness plastic or maybe mine doesn't have the correct wiring.The relay wiring is there any help would be appreciated if anyone has been through this before.

Steve





2010 RTV 900 work lights

Kuhn 7932 and 9032


Does anyone know of any problems that are common with the Kuhn 7932 and 9032 rotory rakes ? I am about to buy one, and I just seen a used 7932 with a new undercarriage under the back rotor.



This rake looked fairly new .



Does anyone know of any problems that are common with the Kuhn 7932 and 9032 rotory rakes ? I am about to buy one, and I just seen a used 7932 with a new undercarriage under the back rotor.



Kuhn 7932 and 9032

Program Card til YLP 100 regulator

Hej. Jeg mangler et programeringskort til YLP 100. Jeg har købt 2 stk regulatore

Som viser sig, fra fabrikkens side, er indstillet til helikopter, dvs med langsom start. De skal bruges til et projekt med en Cessna 421 (2 motore). Det er ikke muligt at finde kortet på nettet( jeg kan ihvertfald ikke) Jeg vil gerne købe/låne/ leje et kort hvis det er muligt.

Henrik

AMC





Program Card til YLP 100 regulator

IMAC kalender 2015. -SÅ ER DEN HER!!!

Hej alle her er kalenderen for den kommende sæson:



xx-xx Marts: Dommerseminar hos Danpo.

17-19 April: Introstævne i Grenå.

9-10 Maj: 1. afd DM i ?

30-31 Maj: 2. afd DM i ?

9-14 Juni: Nordisk mesterskab i Lindtorp.

8-9 August: 3 afd. DM i ?

5-6 September: 4 afd. DM i ?



Vi har ikke ville tage kontakt til de respektive arrangerende klubber, før vi fik besked fra Lindtorp.



Men i dag fik vi endelig bekræftelsen fra Lindtorp, så vi går straks i gang med, at sætte lokationer på de ovenstående datoer..





IMAC kalender 2015. -SÅ ER DEN HER!!!

dad and the spreader

So I have a few cattle, mostly for therapy for my 84 year young dad. He believes in confinement over winter in our climate, having been raised on a depression era dairy. My pasture is on the wrong side of the road from the barn so it has to be one way or the other so the poor girls spend 4 months indoors.



Twice a year we haul pen package manure and spread on hay ground. This requires a pretty fine spread and we have used old Starline rotary spreaders for years. Cheap to buy(bought one and got a half load of manure for $45 at an auction years ago) but slow to spread and takes a lot of fuel.



Dad has been lobbying for a better spreader but hard to justify for such little use so when my NH dealer said he would rent me a nitro I jumped on it. As mentioned in sensible spreader thread it was $150 a day. I called last week and he said he sold that one but another just came in and he would deliver it the next day.



Man is this thing sweet! He got it with custom colors to match his tractors. Really nice spread pattern. I think it's would work great for litter or compost and maybe lime. Check out the hydraulic twilight covers.Splatter:

Attached Thumbnails








dad and the spreader

Poly wind guard wheel covers for darf hay rake



Where can I buy one piece poly wind guards for a darf wheel hay rake? I've seen them they are white poly 1/8th of an inch thick and one solid round piece.any help appreciated!!



Poly wind guard wheel covers for darf hay rake

Mystisk Flip32

Hej med jer.

Jeg er ny i forummet og denne hoppy, men er også hoppet på multirotor limpinden:).

Jeg har købt en NightHawk (kit) i RC Butikken- samlet og testfløjet den en smule. Indlæreingskurven er pænt stejl når man er grøn med en sender i hånden, men det er jo skide skægt:D.

Der sidder en Flip32 på som har virket fint indtil i dag.

Efter ca 30 sek flyvning lever controlleren lige lovlig meget op til sit navn, slå et par spektakulære kolbøtter og havner i jorden (sneen). Samler skidtet op, giver lidt gas og kan se en motor ikke gider at være med til festen. Kort fornøjelse.:(



Hjemme igen (og en tur med hårtørren) slutter jeg den til Baseflight, og så er der godt nok fest! I setup-fanen tilter maskinen ukontrolleret rundt i alle retninger, selvom den står nok så pænt på bordet. Under Raw sensor-data er det sjovtnok kun Z-aksen der er (voldsomt) aktiv. Kallibrering og reset af board hjælper intet. Gyroen er virkelig forvirret!



Da jeg lidt senere slutter boardet til igen, vågner det ikke op som det plejer med velkomst bippen, men er helt tavst. Blå diode lyser, og skiftevis rød og grøn lyser / blinker :confused:



Det lugter lidt af at mit board er stået af.....:(



Nogen der oplevet noget der ligner? :)



Pop





Mystisk Flip32

Seagull YAK 54 '90

Alt er nyt, har aldrig været i luften



Seagull YAK 54 ( 161cm )

DLE 20

6 digital servoer ( 3stk futaba S3151, 3stk Graupner DES 707 )

Mejzlik 16x8 carbon

Aluspinner

2stk Graupner 4.8v 2000mah

Orig Futaba afbryder

Rcexl killswitch vers 2.0

Fed potte



Kvalitet hele vejen igennem



Kun 3500,- ( ALT ER NYT )

















Sent from my iPhone using Tapatalk





Seagull YAK 54 '90

2 stk turnigy LiPO - ALDRIG BRUGT fejlkøb.

Jeg har haft hovedet under armen da jeg bestile disse to LiPO'er. Det skulle have være 2S.



2 x Turnigy 3300 mah 3S (11,1v) 30-40C = 350 kroner inkl. fragt.





Ring på 60776190








2 stk turnigy LiPO - ALDRIG BRUGT fejlkøb.

dryhill bale wagon

has anyone seen a dryhill round bale wagon. i have never seen one but the pictures look a lot like an anderson. any information would be appreciated






dryhill bale wagon

2 stk. meget fine OS Motorer (el)

2 stk. Os el-motorer sælges.



OS Motor OMA-3825-750 = 380 kroner inkl. fragt.



OS Motor OMA-5020-490 = 550 kroner inkl. fragt.





De har aldrig været i luften og har altid ligget i den originale emballage.



Til begge motorer er det lidt fittings som motor-kryds (fundament om du vil) samt propel adapter og tekniske specs. i papirform.



ring på 60776190








2 stk. meget fine OS Motorer (el)

Stumper

Søger Raptor 50 dele, især halebom halerem og halehus. Mob.289 00 490.





Stumper

Taranis sbus






Taranis sbus

Site Problem or is it me?

I seem to spend too much time looking at a dark screen with NetTractorTalk and and ad at the top of it, and nothing else. I wind up backed out to Chrome several times trying to read all the new posts each day when I come by. I am using Winders 7 Prof and then Chrome as my brouser. Thinking about upgrading to Linux and to heck with Bill and microsofty. I definitely aint goin' to Winders 8.anything. I have fairly good DSL and no problems anywhere else. I can click on a thread that shows to have new posts and may have to wait a little for it to appear then click on show first unread and it may appear or not, after everythin' is read backin' back out, to get to the next thread, is a real pain, may click on the refresh arrow a few times etc. It seems to get worse the longer I am here. Is there something I need to change in the Chrome settings? Winders 7? Still kinda new but this is getting aggrevatin.

Bryce





Site Problem or is it me?

Ikarus ECO 8 dele købes

Hvis du ligger inde med dele til en Ikarus ECO 8, eller evt. en hel helikopter, så har jeg interesse i at købe, da jeg er ved at restaurerer en gammel ECO-8





Ikarus ECO 8 dele købes

Acid applicator nozzle placement

samedi 24 janvier 2015

I recently installed A harvest tec acid applicator on my NH 311 small baler. Install instructions all seem to be on point except spray nozzle placement. It says to point nozzles towards bottom of feed chute, 16 inches from surface with nozzles turned at a 45. Now does the spray pattern need to be perpendicular with the hay as it is on the pick up or parallel. Can't seem to find a picture to help figure this out. Anyone have any suggestions? Thanks guys



Acid applicator nozzle placement

Looked at a 640 New Holland round baler

Went with a friend today to check out a baler he is interested in. It looked ok for the price but I'm no round baler expert by any means. Is there any common issues with these?



It looked like a pretty simple to use machine and he and I both liked the fact that it automatically tied. Is there any problems with the auto tie setup to look for?

He liked it but wanted to wait the weekend and sleep on it and see if was still there Monday.



Asking price is $4,750, twine tie only, paint was faded and it did have some rust on the tin work. The bale chamber looked good as did the belts. The owner said he bought it 5-6 years ago and said he put up less than 100 bales a year with it. It looked like he cared for it pretty well but the owner before him might not have quite as much. He had replaced a few chains and bearings along with 2 belts fairly recently. That's about all I can tell you about it

So does this sound like a decent deal to you guys or should my friend pass on this one?



Looked at a 640 New Holland round baler

for hurtigere servos

hejsa

kan man sætte for hurtigere servos på en 3d model.

jeg har samlet en edge 540 140cm span

og har monteret align ds610 på ailerons og rudder og en ds620 på elevator

men den er overdrevet følsom og flyve med.

ville jeg kunne fixe det med expo og servo speed i sender eller er det bedre med andre servos.

jeg har en model magen til med hyperion ds20umd servos og den er mere

rolig

mvh





for hurtigere servos

big square balers

looking for input of folks-lookin to buy a new big square baler with moisture tester and preservative applicator-either new holland or massey====any input or suggestions would be appreciated !!!






big square balers

Lavere flyvehastighed indendørs

Er der nogle som har ide til at sænke flyvehastigheden på et indendørs fly.

Har set lidt på nettet vedr emnet og set at bremseplade på bagkanten er monteret på nogle fly, men sænker det hastigheden eller er det for at forstærke krængrors effekten?

Nogle idéer ?





Lavere flyvehastighed indendørs

Auktion ROTO 25V

Købt på auktion her på forum sidste år, men får den ikke brugt, derfor igen på auktion:)



Motoren leveres som jeg købte den i nedenståenden tråd



http://ift.tt/1uFZOc0



Start pris 500,-kr

Auktionen slutter Lørdag 31.01.2015 kl. 12.00





Auktion ROTO 25V

De Havilland Mosquito

:)Se link



http://ift.tt/1CN6Z0M



Fantastisk godmodig og velflyvende :)





De Havilland Mosquito

New owner 2010 RTV 900

vendredi 23 janvier 2015

I just traded my Gator XUV 620 for the 2010 Kubota RTV 900 with a Curtis plow and worksite tires it has 130 hours on it.Messicks is about 20 minutes from me that's the dealer I went with gave me a good price for my gator on the trade.The tires seem not nearly aggressive for the snow and woods work I cut a lot of firewood for the outside wood burner ordered a set of 26x10x12Grim Reapers off EBAY from discount tire direct for 423.00 with free shipping best price I could find.The only problem I see with the Kubota there no skid plates for any protection already had to fix the fuel line at the fuel pump a stick came up and cut it Messicks must not of checked the machine out before they sold it to me I have not used it offroad yet.I need a set of Peanuts stick stoppers how can I get a set and does anyone make skid plates also just bought steel to make bed rails to haul more firewood.

Thanks





New owner 2010 RTV 900

Restoring my A -Team van

Hey gang,



I just bought this biggun' 4 days ago for $600 with aims to fix it up for my next big road trip. Thing is, I have ZEEEEERO mechanical, carpentry, electrical know-how. I'd like to convert it into a reliable energy efficient green camper, though I'm not even sure where to begin.



I considered the obvious was taking it to an auto-mechanic then to a body shop for a whole new face lift. As you can see this van's been through it. Afterwards maybe replacing the chairs, blue printing for solar panel installation and wiring. After all that I guess I can start building the interior. That's just what makes sense to me, but I'm not sure. Any seasoned folks out there with some good advice or ideas of how much I can expect to shell out? I'd like to get him ready to rock withing a year.



Thanks for all of your help mates.



Atum

[IMG][/IMG]
















Restoring my A -Team van

Købes E-flite Beast 60e

Hej , står der sådan en og keder sig er jeg interesseret evt. kan en sprit ny PNP E-flite Carbon Z Yak i org. indpakning den blå indgå i handlen hvis du kan bruge sådan en.

Hilsen Henrik





Købes E-flite Beast 60e

sejlbåd

kan denne have interesse står i Fredericia og hvad kan den koste ? kun pm

http://ift.tt/1EBWv5T:)





sejlbåd

Vintertermik

Hej svævere



Dagen idag så ud til evt. at kunne byde på mulighed for lidt vintertermik (lidt sol og svag vind). Jeg regnede ikke med at finde noget termik af betydning og tænkte, at jeg ville bevise, at med så lav sol-indstråling her ca. en måned efter solhverv, er vintertermik simpelthen umulig i DK!



Den lille DLG (Twister2) var ladet op og der blev sat tid af fra kl. 13:45 og efter nogle kast med "holden-højden" og et par ture til ca. 70m og meget svag termik fik jeg endelig fat - big-time. Det svage løft blev markant stærkere i højden for til sidst at blive decideret kraftig (klokken var ca. 14:20). Var/er totalt målløs - endte med tre stigninger og klokkede 18 minutter på det kast :)



Fingrene var blå og næsen snottede - men hva' faen: Narkomanen fik sit længeventede termik-fix. Livet er godt - og hermed bevist at der faktisk er termik om vinteren! (Specielt i højden.) Giv den gas, gutter! :)





Vintertermik

propeladapter

er der nogen der ligger inde med sådan en så jeg ikke skal vente 10 dage på den fra hobbyking, den er i tommer troede den spinner jeg havde købt at det var mm bolt der var med til at skrue på og så ewr det 5/16 ":( det er til 5 mm aksel

http://ift.tt/1t6eJLl

micu:)





propeladapter

servo

Hejsa hvordan kan man vide hvor store servoere jeg skal bruge til min sig piber cub 1/4...



Jeg vil kun have kvallitets servore futaba , servo....men det kniber lidt med at finde ud af hvor kraftige jeg skal købe....





servo

Ny Spektrum DX6 G eller brugt DX8?

Ny Spektrum DX6 G eller brugt DX8?

Håber der er nogen som har bedre kendskab til sender og modtager end jeg.

Jeg vil forny min DX6i

Og kan ikke rigtigt se hvad der er bedst, jeg får ikke brug for mere en de 6 kanaler, men gemmer der sig andre fordele ved en Spektrum DX8, 2,4GHz

Jeg har muligheden for at køber en brugt ca. 3 år Spektrum DX8, 2,4GHz

Eller købe en ny DX6 G 2,4GHz

Prisen bliver næsten den samme når man medregner modtageren med i den nye kasse.

Vi på langt sigt nok bruge telemetri opsætning til fastvinget fly.


Jeg hører gerne en kommentar hurtigt.

På forhånd tak.





Ny Spektrum DX6 G eller brugt DX8?

Ny Spektrum DX6 G eller brugt DX8?

Håber der er nogen som har bedre kendskab til sender og modtager end jeg.

Jeg vil forny min DX6i

Og kan ikke rigtigt se hvad der er bedst, jeg får ikke brug for mere en de 6 kanaler, men gemmer der sig andre fordele ved en Spektrum DX8, 2,4GHz

Jeg har muligheden for at køber en brugt ca. 3 år Spektrum DX8, 2,4GHz

Eller købe en ny DX6 G 2,4GHz

Prisen bliver næsten den samme når man medregner modtageren med i den nye kasse.

Vi på langt sigt nok bruge telemetri opsætning til fastvinget fly.


Jeg hører gerne en kommentar hurtigt.

På forhånd tak.





Ny Spektrum DX6 G eller brugt DX8?

Kan man handle her

Er der nogen der har handlet her med succes?

http://ift.tt/1yB4SOk





Kan man handle her

Fortrød :-)

Fortrudt





Fortrød :-)

Lower ball joint replacement

jeudi 22 janvier 2015

I had my son pick up a replacement ball joint from the local dealer today, he didn't know any better.



This is not my first time with this so I'm a bit surprised...



Does anyone know when they (Kubota) stopped including the castle nut and cotter key with a replacement ball joint? Really, we are supposed to use the old nut now?



Not a big deal, just an inconvenience with a $42 part.





Lower ball joint replacement

HQ prop test 5x4

HQ prop 5x4 test LOS :)










HQ prop test 5x4

S: immersion tx/rx udstyr, fpv monitor

Sælges:



immersion 600mw audio/video transmitter. 400,-

Immersion 5800 duo diversity receiver 800,-

2 stk immersion/fatshark spironet antenner 200,-

8" Fpv monitor med sunshade 300,-



Skærmen har en tynd streg (skygge) i billedet, men det skjuler ikke noget af billedet. Alt er fatshark kompatibelt og kan drives af et 3s batteri på jordsiden og et 3s-6s batteri på luftsiden.





S: immersion tx/rx udstyr, fpv monitor

Lear Jet Hegi nostalgi Aktion

Hegi Lear jet. to motores til 2 impeller krop glasfiber vinge 140 cm haleror T hale balsa to store droptange i vingespidser ca 40 år var oprinlig bygget til brændstofmotor skubbepropel, men nu har vi jo lipo og impeller skal samles og beklædes eller males . startpris 500 kr- aktionen slutter Torsdag d 29/1- kl. 20,00- 2015 forbehold hvis prisen er for lav. mvh. Jan Linnebjerg 7441 Bording Airport DK. tlf. 20813878 :)





Lear Jet Hegi nostalgi Aktion

Massey 1837 hay dogs

I have a couple hay dogs on my Massey 1837 that are stuck and the rubber pads need replacing. I went to unbolt them and they won't come lose. It's to the point I'm afraid I will break the bolt. The nut seems to be in a grove when it's locked, so you can only turn the head side, but it's seized. Any ideas? I tried hearing the nut with a torch but that didn't help.



Massey 1837 hay dogs

Hobbyzone sport cub

Hej nogle der kender denne

http://ift.tt/1Jekw5M



det må være vel være en champ med krængror



mvh



Henrik





Hobbyzone sport cub

stopped smoking but,why??

Newb, here, but not to diesel. I recently got a 2006 900 rtv that when first started it would smoke a lot, and you could also notice a slight "vapor" trail under a load.

Just on a guess I noticed some pressure build-up when the oil filler cap was removed (i.e.-blowby) with the engine running. I removed what I would call "the bladder" from the pcv valve(lack of proper terminolgy) located on top of the valve cover. To my shock the smoking stopped. Could this be pointing to a more serious issue?? The machine has 1475 hrs and basically new to me, so I can't tell a history. I got this from a will of a past family member. Any help or guidance would be greatly appreciated..thanks in advance.:pat:





stopped smoking but,why??

Så galt kan det gå

Underholdende video om hvor galt det kan gå-Hvis man flyver og filmer hvor man ikke må.



http://ift.tt/1CVbpTD





Så galt kan det gå

Easystar, MyFly,Bixler el lign. købes

Så vil min søn gerne have sin egen flyver, vi søger en rygskubber den behøver ikke være perfekt, renoveringener jo en del af hobbyen,men det er kun flyveren vi mangler, lad mig høre hvad I har til salg , mest relevant I trekantsområdet hvis ikke det kan sendes.

sms gerne på 40961117





Easystar, MyFly,Bixler el lign. købes

RTVX 1100c 50 hr service

I am fast approaching the 50hr service on my 1100c. I don't have an owners manual so i will ask here. do i just replace the filters and top off with super udt?



change engine oil?





RTVX 1100c 50 hr service

Købes: Fatshark googles.

Er lidt i tvivl om i hvilken kategori jeg skal oprette denne, så derfor er den oprettet i både radiogrej og multi-rotor.



Jeg søger et sæt Fatshark Attitude SD googles, ser helst at det er den "gamle" model uden headtracker, men V2 kan også gå an hvis prisen er rigtig.

Søger helst et komplet sæt indeholdende: Goggles, batteri, kamera, filter, 250/600mw TX & antenner.



Men skriv gerne hvad i har, også selvom det ikke er Attitude modellen.

Søger dog kun Fatshark og ikke andre mærker.



Mvh.





Købes: Fatshark googles.

7" LCD skærm med indbygget 5,8GHz sælges.

7" LCD farveskærm med indbygget 32 kanalers diversity modtager ( 2 separate modtagere ) til modtagelse af 5,8 GHz videosignal.

Indbygget LiPo batteri på 2450mAH, lader og solskærm.

Pris 900,- kr.



Nypris 1.395,- kr.

http://ift.tt/1CFTxM7





7" LCD skærm med indbygget 5,8GHz sælges.

FPV på Phantom

Hej



Har en Phantom 2 med Gopro på og ville gerne have monteret en videosender på den og en skærm på senderen.



Hvad kan I anbefale jeg køber ?





FPV på Phantom

Fatshark fpv kamera.

Hej. Har et helt ny Fatshark kamera i original kasse. Kun pakket ud for at se på det. Sælges da jeg ikke får brug for det. http://ift.tt/1Bhht9f



Det passer direkte på immersionrc sendere.





Fatshark fpv kamera.

Kuhn 9032 rotary rake

mercredi 21 janvier 2015

I am about to purchase a new kuhn 9032 twin rotary rake . I've never used a trailed twin rotary rake before. Being this rake has a 13ft rotor, I will be making 2 windrows with each pass. Does anyone know any of the pros and cons of this machine ?



Kuhn 9032 rotary rake

Help on baler options...Vermeer 604XL or 554xl, Case IH 8435,

OK, I need some help on this one. Our old baler ate itself last summer and we need a new used one. But I can't afford to buy the real expensive models. So far I got it down to

1. Vermeer 604xl $7500 clean with only 6k bales on it.

2. CaseIH 8435 $7500 that was hardly used really low bales. Maybe 2k bales

3. Vermeer 554xl $10k with 4k bales on it.



We bale 120 round bales a year. And need a 4' wide bale. But I can't find out if I can make smaller bales in the 604xl. Can that baler make smaller bales than a 6' tall? Because I want to make 6 foot tall for us and 5' tall one for sale..... Also what's everyone's views on these model options. I don't want to spend over 10k any help is appreciated especially on the 604xl question.



Help on baler options...Vermeer 604XL or 554xl, Case IH 8435,

S: 2 stk 16000mah 6S Multistar, aldrig brugt

Netop taget hjem, men er lige et par mm for store til mit brug.

Er hverken ladet eller taget i brug på anden måde.



800,- stykket





S: 2 stk 16000mah 6S Multistar, aldrig brugt

Bremsesystem til en Golf gti

Ja ved godt det ikke har så meget med Modelfly at gøre ud over min golf gti transportere mine fly frem og tilbage. Nej spøg til side, ville spørge nogen herinde om de kan sige god for bremseskiver foran og bagved inkl. Klodser fra et tysk firma som hedder Zimmermand som er stor handler dernede i bremseskiver m.m. Eller skal man holde sig langt fra dette mærke af, også fordi bilen har 230 hk at gøre godt med.





Bremsesystem til en Golf gti

k. maxi puch

Er på udkig efter en maxi puch med kickstart.

Skal være iorden og kunne køre.

mvh Bjarne





k. maxi puch

Anbefaling af førstegangs fly.

Hej Alle.

Jeg er ny i denne hobby,ikke mht at bygge men tiden er kommet til at jeg skal lære at styre et fly.

Jeg tænker et langsomt flyvende fly,lidt alla piper cup eller lign.

Hvilken type,model ville du anbefale mig at lægge ud med.

Det skal lige siges at jeg indmelder mig i Randers Modelflyveklub,hvor de også har en simulator som jeg vil prøve.

Mvh Rene Fjeldstad





Anbefaling af førstegangs fly.

Hvordan er det lige med indfaldsvinkel?

Jeg er ved at samle en ARF Phoenix Model K8b på 3,5m.

Jeg fandt en tysk tråd om dette fly, og der i beretter de om at EWD er helt gal.

spørgsmål 1:

Er EWD ikke det samme som indfaldsvinkel?



Profilet er HQ 3/15. Jeg harsøgt på nettet, og fundet ud af at det profil er lavet til max 3 grader indfaldsvinkel http://ift.tt/1BG04JR

Men som jeg forstår det, kan man med fordel have mindre, og at man der ved kan rygge C&G længer tilbage.

Er det rigtig forstået?



Mit mål er ca 1,5 grad.



Spørgsmål 2:



Når jeg vil finde 1,5 grad. Skal jeg så ikke sætte min indfaldsmåler på vingen, og klodse flyet op så måleren står på +1,5. (bagkant er laver end forkant)

Der efter juster jeg haleplanet så det står i 0 grader.

Er det rigtig forstået?





Hvordan er det lige med indfaldsvinkel?

Købes:begynder DLG

Købes: Begynder DLG, vil gerne prøve lidt hygge DLG,, nogen der ligger inde med noget de vil sælge,, Libelle eller lignende

Mobil:26805218





Købes:begynder DLG

test

test test





test

Kraftig strømforsyning

2 stk 575 watt 12 volt og 47 ampere klar til at ligge ned I Aluminiums kuffert med xt 60 stik monteret I plade 1stk 12 v udgang og 1 stk 24 v udgang kører perfekt sælges for 600 incl fragt



Ps billed kommer





Kraftig strømforsyning

nye indlæg funktion fejler

Fejl på "nye indlæg"



Jeg har flere gange konstateret, at når jeg bruger funktionen "nye indlæg", så mangler der flere indlæg(tråde), som den ikke kommer frem når jeg bruger den funktion.

Lidt trals, når det er min måde at følge forum på.



Jeg ved godt, der er planlagt et nyt forum igen, men der kan jo godt gå lang tid.





nye indlæg funktion fejler

Blade 350QX med briller og kamera / gimball / SpiroNet antenner

Blade 350QX med firmware 2.0 Gimball kan styres fra sender + ekstra lange ben

komplet med alt, det eneste der mangler er en Spektrum Sender Så er du FVP flyvende.



Pris: 3900,-



FatShark Predator V2 goggles + etui

600TVL FPV cam

Nye SpiroNet antenner + originale antenner

600mW video sender

Spektrum Ar7000 modtager (til Gimball)

Gimball (software SimpleBGC)

FULL HD action kamera med 5mpixel cmos sensor

USB interface til Blade 350 QX





Billede af en Blade 350QX







FatShark Predator V2 goggles + etui





SpiroNet antenner





FVP Kammera TVL 600





FVP sender 5,8GHz 600 mW.





Modtager til Gimball AR7000





Gimball





FULL HD action kamera med 5mpixel cmos sensor





USB interface til Blade 350 QX






Blade 350QX med briller og kamera / gimball / SpiroNet antenner

Slow-Fox v3

Jeg har ændret lidt på min model .



Den er nu i stand til loppe,, og rulle,, og ving-over osv...



med den store prop kan den jo hænge jo prop ,, så de mest skøre manøvre kan fortages, kun Piloten sætter begrænsningerne .



.Aerodynamik s :



1. Jeg har monteret krænge-ror på øverste vinge .

2. Monteret bremser mellem vingerne på den skrå stiver ca 45#45 mm.

3. udskæring i øverste vinge både forkant og bagkant ? Formål, at vingen

kunne få lidt mere frivillig V form .



Bygge teknisk : Motor-skot forstærket ,, nu 6 mm depron ,, lidt mere sidetræk .



Pimpet er den også blevet ,,,



1. Monteret motor attrap 8 cyl m udstødning.

2. frontspejl / pilot/nakke pude/ og selve kropsdelen lige bag ved pilot i et mere smalt design .

3. glide skinner under /yderste vinge .

4 . mere synlig air-indtage

5 . hale plan i lidt andet design.



Vægten er stedet til 170 gr, p.g.a div rep..forstærkninger . men den flyver endnu mere langsomt med de ændringer der er gennemført .



Det begyndte jo at sne ,, så ski måtte lige produceres til modellen,



se pix.



Og så må jeg heller bruge pausen på lidt paint job ..en kollega har tilbudt, at bruge tid på ### air brusch ### så nu skal den sprittes af,,,





Konstruktøren selv .



Der Flieger Snitzel



OY4490

Vedhæftede miniaturebilleder



:eek:





Slow-Fox v3

Turning signals mystery

mardi 20 janvier 2015

I had lights and turning signals installed at the dealer's on my 2014 1100. When I turn on the right-side turning light, the right-side one blinks but the left-side one comes on and stays on without blinking, both on the dashboard and on the front and rear blinkers. If I turn on the left-side turning light, the left one blinks (both dashboard and front and rear blinkers) and the right one stays on. The dealer said they connected the lights by the book. I don't think so. What do you guys think?





Turning signals mystery

Kubota Rebate form

This works if you are buying from an authorized Kubota dealer !

http://ift.tt/1CNcfBU

Just click on "click here for coupon "Print it ,fill it out and snail mail it in to the address listed. collie





Kubota Rebate form

Kuhn gmd3550 trail disc mower

I am thinking about buying a Kuhn GMD3550TL. I have a couple of questions to ask some of you more experienced equipment operators.



Is this a well designed cuter bar?



How difficult is getting twine and wire out from under the inner-most turtle? This is the inner most turtle under the vertical drive shaft.



I have been told if a turtle breaks the protecta shaft that the turtle departs the machine out the back without damaging adjacent turtles or the bed of gears in the cutter bar. Also, that the welded cutter bar will not be contaminated by a sheared shaft (turtle bar departure) or a failed turtle bearing. Well, is all this true?



Have any of you used a gmd3550 with the wide angle secondary cv joint? Is it worth the extra money to go around trees and obstacles?



Is the rock guard option to protect the front hood from rocks hitting the front hood and dimpling the hood worth the money to protect the front hood, i.e. does it prevent rock damage to the hood?



What are your thoughts on the dyno gyro or gyro dyno that keeps the pto shaft in line with the tractor longitudinal axis? Is it a good design or a mx nightmare?



What maintenance/financial nightmares might I encounter with this unit?



Will I be happy with this machine?



I thank you all in advance for all of your responses



Kuhn gmd3550 trail disc mower

quick winch help, ordering now

I'm getting a winch for my 05 900. Looking for something that can bolt right up. Also looking for the biggest that will fit. I can't use the search button because I'm on my phone. A link would be very helpful.



My brother owes me a winch (long story about his garage burning down) an he's looking to order me one asap



Thanks





quick winch help, ordering now

dug....

Hejsa er der en der ved hvor man kan købe denne dug tybe til model fly...



http://ift.tt/1EnKFMu





dug....

Hay Prices and Buyers

I've been part of a hay operation in IL for about 2 years. I help produce the hay as well as market the hay. This year, we put up over 52,000 small squares of hay--straight alfalfa and grass mix. I've been watching the markets and have seen how certain markets (like the price of milk) will trickle down to affect the market price of hay. I also have customers that watch the prices of hay at auctions and think that we should have comparable prices right out of the barn. My boss knows down to the penny how much it costs to produce a bale of hay (he's a numbers guy) and he isn't about to give the stuff away. He has a floor price for each type of hay we sell but I have been running into customers that want our bottom price or even lower. It doesn't help when other producers haven't figured the cost of production into their sale price and undercut the folks that are trying to make a decent profit. Our profit margin is only around 10% - 15% per bale. I have been talking with hay buyers from other states and they want to buy our hay but the freight costs will usually turn them away or they will ask us for a cut in the price of the hay to offset that. We can only come down so far. Perhaps they think since gasoline prices have dropped that other fuel prices must have dropped. All I know is that I am starting to see a trend of persnickety hay buyers (more so than usual) when it comes to large purchases. I understand, its a lot of money for hay and freight but when I average out the freight costs per bale it usually is around $1 to $1.50 per bale for a 200 mile delivery. We're hoping the weather becomes "more wintry" and that will increase the need for more hay. I guess its just feast or famine. I'm just wondering how everyone else is doing in selling their hay.






Hay Prices and Buyers

Billigt FPV sæt købes

Da jeg gerne vil begynde at flyve FPV,vil jeg spørge om der er nogen der har et ordeligt sæt til salg til en rimelig pris.

bare "Briller" og kamera og hvad der ellers skal til for at starte.

:)





Billigt FPV sæt købes

os 160 Som bensiner

Hejsa jeg har lyst til at lave en og 160 om til bensin....er der ikke en der sidder hjemme med en side hvor man kan købe det man skal bruge til det....





jeg fandt denne side men han ser ikke ud til at have caburatoren til det kun tændingen.....



http://ift.tt/1EneKf7





os 160 Som bensiner

Bale wrapping questions??

We are looking into bale wrapping and have a few questions. Do you stack the wrapped bales? Any problems with vermin ripping or nesting? Is Sunline the only manufacture of the film? Any ideas and maybe good source of pallets of film would be appreciated! Thanks, Mike






Bale wrapping questions??

sluggish transmissin rtv900

I'm new and i must confess i just joined because i just picked up a rtv900 with a trans issue. when you first start it and put it in gear and try to go it just free revs. if you hold the throttle down it will finally take off and go but has very little pulling power. it still just about throws you through the windshield when you stop so I'm thinking the swash plates are ok. also the pump makes a lot of noise when it finally takes off and the fluid on the dipstick is really foamy. the filters and fluid have very few hours on them. where should i start before i pull it out and replace the pump. thanks for the help in advance





sluggish transmissin rtv900

Need Help!

We have a L2900 Kubota Tractor. We had the post auger on it Saturday and was putting in a hole for a fence post. When the drill was down about 2 1/2 feet the auger just slowed down and stopped. It was like it was turned off. We checked the hydraulic fluid and it was ok. What could be wrong?





Need Help!

Post DK

Hvad sker der her med min propel fra Lindinger ?





Forsendelsen er returneret til afsenderen



Forsendelsen behandles på vores sorteringscenter















Hændelser

Dato/tidspunkt StedHændelse 19-01-2015 16:10Københavns Pakkecenter (BRC),

DanmarkForsendelsen behandles på vores sorteringscenter19-01-2015 08:51Vestegnens Pakkedist, Danmark

Forsendelsen returneres til afsender19-01-2015 08:51Vestegnens Pakkedist, Danmark

Modtagelse nægtet16-01-2015 16:11Vestegnens Pakkedist, Danmark

Forsendelsen er desværre forsinket en dag.16-01-2015 08:57Vestegnens Pakkedist, Danmark

Forsendelsen er ankommet distributionscenter15-01-2015 20:40Københavns Pakkecenter (BRC), Danmark

Forsendelsen behandles på vores sorteringscenter15-01-2015 16:04Taulov Pakkecenter (TLP), Danmark

Forsendelsen behandles på vores sorteringscenter15-01-2015 14:33Taulov Pakkecenter (TLP), Danmark

Forsendelsen er ankommet til modtagerlandet14-01-2015 07:04Internationalt Postcenter, Danmark

Forsendelsen har forladt afsenderlandet13-01-2015 22:39Internationalt Postcenter, Danmark

Transporten af forsendelsen er startet i afsenderlandet





Post DK

Simuleret angreb

Hej jetfolk



på et tidspunkt blev der linket til en hd udsendelse her på forum med et stort simuleret angreb i USA som varede ca 50 minutter, har ledt meget efter det, men uden held, er der nogen af jer der tilfældigvis ved hvad det hedder så jeg kan gense denne fede video



Hilsen Lars





Simuleret angreb

Side rails X1100 disappointed

I've seen the sticky on side rails and really liked the idea. So last week when I picked up my new 2104 x1100 I had the back window screen included as part of the deal. My plan was to use 1" tubing and run boards on the 2 sides as others have done with the window screen .



Wrong! I don't know if it will work on the previous1100 models but on the 2104 you cannot put a 1" tube in the front ( near the window) , the bracket for the window screen is in the way. I think kubota might have overlooked something ??????





Side rails X1100 disappointed

Another newbie owner





Hi Folks,



I have been "lurking" on this great forum for a month or so trying to learn all I could about the RTV before making a purchase decision.



So despite the many quirks that I learned about the machine here, I finally made the decision to purchase a used 2005 900R camo model with 250 hrs on it. It appears to be in really good condition and was set up by the original owner for quail hunting here in Texas. Since the bird hunting has slowed down so much he decided to part with the machine and I got it to use on my deer hunting lease in West Texas.



It's equipped with the Kubota top, glass windshield, overhead console with a currently non-functioning Jensen CD/radio, front cargo over-hood rack plus a front hitch rack, camo cab enclosure, glove box, rear cargo light, lift kit with Swamp Witch tires, bed-mounted tool box and high-rise seat, gun racks, and sprayed in bed liner.



I bought it about two weeks ago and it went directly to the hunting camp but I only got to use it for one day before we lost a family member to early-onset Alzheimer's and had to leave it there. I just got it home last night and was able to get it into my garage (barely!) by letting the air out of the tires so the top and radio antenna would clear.



Now I will get started on replacing fluids (Yep, I know....SUPER UDT!), filters, etc. as well as removing/cleaning the spark arrestor and installing a high-rise air intake. I've already ordered a set of Peanut's boot guards and they should be here shortly. And I definitely need to get some type of side-mounted rear view mirrors installed since I can't see a darn thing out the rear with the high-rise seat and dust-covered rear cab enclosure in place!



I want to thank everyone for sharing your knowledge and experience in this medium with those of us who need it! :thankyou2:



Now how the heck do I post pics of my new toy on here? I have some on my iPhone and know that I will have to get them into my computer first. Can I just do a copy/paste to insert them when I'm ready?





Another newbie owner

2,4 GHz antenner ??

Har gådet og grupler over noget i de sidste på dage :rolleyes::rolleyes:

Kan se at en standart antenne til 2.4 GHz er på 2db

Er det en fordel at sætte en 5 db antenne på ens sender ??

For en beder rækkevidde, eller har det ikke noget at sige ???

:cool:





2,4 GHz antenner ??

Spectrum Dx6 eller 7 Søges

Jeg søger en radio gerne DX6 eller DX7 fra Spectrum.



Skriv venligst hurtigst muligt.





Mvh



Stephan





Spectrum Dx6 eller 7 Søges

The FAA means business

Der bliver talt i pænt store bødestørrelser i USA i øjeblikket.

Som med alt andet så er det nok ikke sikkert at de bliver effektueret, men det siger nok lidt om FAA's intentioner?



Se mere her http://ift.tt/1yE48ty





The FAA means business

RTV vs BX snow plowing

lundi 19 janvier 2015

We moved to our property in November and are now there full-time, so this is my first winter maintaining the driveway on a regular basis. Last fall, we got a BX 2370-1 with loader/forks, mower, and frame-mounted 60" hydraulic plow to replace our old Cub LoBoy and JD 425. Our driveway is about 1/3 mile long with some open spaces in front of the garage, barn and turn-around. It takes four passes on the drive with the blade angled. To plow everything it takes between 1:15 and 2 hrs depending on how deep the snow is. On a nice weekend day this is OK, but not at 6 AM when its still coming down and is 10 degrees out. A truck plow would be the way to go, but is not an option.



We have been thinking about getting one of these Original Tractor Cab enclosures for our RTV1140

http://ift.tt/1yjtGds



And, with this enclosure, I am wondering if I should get a plow for the RTV and sell the BX plow. I like the looks of the BOSS 6' poly straight blade. The enclosure would definitely keep the weather off of me and the RTV can travel faster than the BX, which tops out at 8 MPH. Of course, I'm not going to be plowing at 25 MPH with the RTV, but with an extra foot of blade width and 10-15 MPH in the straight aways, I would think that I could shave some time off of the chore.



Any thoughts?





RTV vs BX snow plowing

Grade shear bolts for Massey 1837?

Going to get some extra shear bolts for my Massey 1837. Does anyone know what grade bolt they are? Thanks in advance!



Grade shear bolts for Massey 1837?

Loading RTV 500 in 6.5ft bed.

Hello. Looking to take my Kubota for a bit of a trip. Wondering if anyone has had experience in loading one. I have a 2013 F-150 with a 6.5ft box. I am concerned that the tailgate will not support the aluminum ramps when driving it in. I plan on having planks under the rear tires. Any thoughts welcome.





Loading RTV 500 in 6.5ft bed.

RAF museum Hendon

Hej

Skal derind på onsdag, så hvis nogen har specifikke ønsker om foto til deres evt. skala projekt, så skriv til mig.





RAF museum Hendon

Gamle jetjagere

Hej.



Ville lige dele dette med jer,da vi trænger til at se flyvere og sommer.



Det har jeg filmet i sommers,på Langelandsfortet/Koldkrigsmuseet.



Tomas.



http://ift.tt/1CIiUNN





Gamle jetjagere

Bil sælges

Seat, Arosa, modelårg. 1998, Benzin, SE, 3 døre, 16,13 km/l, 160 km/t, Blåmetal, Km 250, Mini, Halvkombi, 2 airbags, Fornuftig nr. 2 bil eller til den unge der lige har fået kørekort.

Bilen er ikke synet, det skal den til Marts, men der er plader på.

For syn skal der tjekkes bremser, ellers tror jeg ikke der er noget.

kom og se den, prøv bilen og giv et fornuftigt bud, og lad os om registrer bilen med det samme, så kører du herfra.

Der er Pioneer anlæg med CD og USB.

Der er fine dæk på bilen.

Ingen olieforbrug

Smid en besked med mailadresse, så sender jeg nogle billeder.





Bil sælges

Leder efter et fbl hovede

Hej alle,



Jeg søger et FBL hovede til en 10mm Aksel. 90 Størelse.



Mvh



Stephan





Leder efter et fbl hovede

Et godt grin på vej :oD

Så kan I godt begynde at glæde jer, der er snart præmiere:



http://ift.tt/15qHmbp





Et godt grin på vej :oD

Art-Tech Cessna 182 - 500 class

Jeg sælger denne velflyvende model da jeg ikke længere har tid til at flyve den.



Info omkring den kan ses her:

http://ift.tt/1IYvZGs



Sælges med original fjernstyring.



Og hvad koster herligheden så???



1000 kroner afhentet så har vi en handel.



[IMG] [/IMG]



[IMG] [/IMG]





Art-Tech Cessna 182 - 500 class