Decided I'd build a lift kit. I'm always dragging my butt thru the timber. Thought maybe a 1" kit and then 27" tires might help that problem.
Started with the front. Built six 1" spacers, three for each side. Had to take the strut nut off so I could get the top bracket off and drive out the knurled bolts so I could replace them with longer bolts.
Putting that back together was a bit of a challenge. I didn't have a spring compressor so removed the springs, clamped them in a vice, wired them together, then installed and cut the wire after the top bracket was refastened to the strut stem. Sorry I didn't get pics of that process.
Started with the front. Built six 1" spacers, three for each side. Had to take the strut nut off so I could get the top bracket off and drive out the knurled bolts so I could replace them with longer bolts.
Putting that back together was a bit of a challenge. I didn't have a spring compressor so removed the springs, clamped them in a vice, wired them together, then installed and cut the wire after the top bracket was refastened to the strut stem. Sorry I didn't get pics of that process.
Lift Kit Homemade RTV900 1"
0 commentaires:
Enregistrer un commentaire