Hi to everyone, i am new to the forum and reside in the UK.
Sorry to make my first post a plea for help but i am running out of ideas.
I have a 2008 rtv 900 that i purchased with major problems. So far i have replaced the engine crankshaft and all bearings, conrods, and input shaft flange. On the transmission have replaced the input shaft , swash plate valves, oil (super udt) and all filters (genuine).
Thought i was sorted but no !
The machine will only top out at 15mph and will not climb the slightest incline in H. I know these are not fast but something is not right.
Have checked all linkages for adjustment and free movement and all is fine. Checked brakes for binding , all fine. Engine is good now after rebuild. Removed spark arrestor.
Charge pressure is 95 psi, forward relief valve pressure is 3600, reverse relief valve pressure is 3600 .
I anyone has any ideas what to look at next i would be very appreciative as i am now stumped.
Sorry to make my first post a plea for help but i am running out of ideas.
I have a 2008 rtv 900 that i purchased with major problems. So far i have replaced the engine crankshaft and all bearings, conrods, and input shaft flange. On the transmission have replaced the input shaft , swash plate valves, oil (super udt) and all filters (genuine).
Thought i was sorted but no !
The machine will only top out at 15mph and will not climb the slightest incline in H. I know these are not fast but something is not right.
Have checked all linkages for adjustment and free movement and all is fine. Checked brakes for binding , all fine. Engine is good now after rebuild. Removed spark arrestor.
Charge pressure is 95 psi, forward relief valve pressure is 3600, reverse relief valve pressure is 3600 .
I anyone has any ideas what to look at next i would be very appreciative as i am now stumped.
Rtv 900 drive issue
0 commentaires:
Enregistrer un commentaire