Hayliner S68 Banana Bale trouble

So i bought a baler from my neighbor last year. NH S68. Pretty good condition, needed a needle. I put a needle on it, and started to use it. I had tons of little problems with the knotter from sitting, the blade on the plunger needed sharpening, PTO shaft, etc,

 

He said it sat for a couple years in his barn, but baled perfectly before. 

 

Now the one problem i CANNOT figure out is the banana bale problem. Its consistantly on the far side, left if i'm facing it from the rear. 

Things i've done

• Tension on that side, higher and lower
• This baler has 6 teeth, tried moving them closer so it pushes more to the far side
• Cleaned bale chamber
• Switched the string from one side to the other(one seems a little easier to pull through the tensioner)
• Put a grinder to the tensioner to rough it up
• Feed it heavy windrows
• Feed it on either side, and center
• Feed it small windrows

I'm clueless, as are the guys i know that make hay. 

 

Any suggestions would be greatly appreciated. 

Hayliner S68 Banana Bale trouble