NH BR740 Twine arm making contact with side wall of baler at home position

Okay so we recently finished baling and wanted to eject a partial bale the next day we fired up the PTO and used the manual lever to activate the tying process.  The problem was that we forgot to lower the pickup and the twine arm safety release was activated.  Once we had the safety release re-engaged now when the twine arms return to the home position the LEFT arm makes contact with the side of the baler as if it is too long.  You can see in the first image the end of the twine arm is jammed up against the side wall of the baler and the other picture shows the RIGHT arm with plenty of clearance there.  I also included a picture of the safety latch to show that it has been put back together.  Any ideas on adjustments or fixes that I should look at?

 

Thanks!

 

-Bill

 

Attached Thumbnails

• 
• 
• 

NH BR740 Twine arm making contact with side wall of baler at home position